What did you do to your truck today!

[dmwphoto]

Originally Posted by AirSpeed

I installed a new rear view mirror in my passenger door, the door never had one so I had to measure the drivers mirror about twenty times before I was happy enough to drill holes in my new paint! The new mirror is beautiful compared to the old one on the drivers side, now I have to replace that one! While I had the door panel off I installed a bunch of 1/2" thick rubber sheeting on the inside of the doors, what a big difference in the way the door sounds now! Sounds very solid when you close the door and driving is a lot quieter!
Posted via Mobile Device
Posted via Mobile Device

Little touches like that can make a big difference
Good job
Posted via Mobile Device

[magwakeenercew2jh]

Will the mock-up ever end?

[swamp rat]

Welded a 5" long crack on the rear of my frame right where the bumper mounts, not too sure how it got there,the bumper i took off was welded to the frame so ether it was welded because the frame was cracked somehow? or it cracked from being welded? the crack was almost directly in the center of and parallel to the welds.

Also made and mounted a ground strap for my fuel cell and ran the sending unit wire up to the cab but did not terminate the cab end yet.

[sams60gmc]

Originally Posted by FRENCHBLUE72

I got these in the mail froma good friend today for the blazer now just have to find time to install them..

Oooo nice.

[Relish]

me and my brother put headers on my truck and then drove it home 30-45 minutes with open exhaust. on wednesday i'll be getting the exhaust done.

[dmwphoto]

Originally Posted by Relish

me and my brother put headers on my truck and then drove it home 30-45 minutes with open exhaust. on wednesday i'll be getting the exhaust done.

that had to be both fun and nerve wracking. WTG

[Relish]

it was a blast but most deffinately nerve wracking and i eas really nervous cause i saw two cops. a stock 307 open header sounds awesome the only problem was driving on the high way with a 3 on the tree she sure was loud then.

[mcmlxix]

Got the new body mounts and ORD 1" lift blocks in place... took forever to get the bolts out without hacking to floor....

[FRENCHBLUE72]

Powder coated my hooks just gotta get some bolts for em.. Also picked up some weatherstrip adhesive for the new seals.

[flashed]

Bought some more Ralley wheels for it .I am currently running 6" van ralleys ,but now also have a set each of 7" and 8" truck ralleys .Now I need to figure out what is wrong with the sand blaster I borrowed so I can get them all blasted and painted and decide which ones to keep. My wife thinks it strange that I have 4 sets of wheels for one truck .

[rakerkman]

Had a great time replacing the heater core in my 70 C-20. Found a bird nest stuck in there and while I was at it found got rid of some useless wiring that the previous owner had redone but never removed. I got heat now and a little less weight so she might go faster.

[lil hoodlum]

I had a productive day, I painted the inside of my tailgate, front bed panel, and the white on top of the doors. The paint is dupont light blue #507.

Tomorrow, I am supposed to get some parts that I order earlier in the week. New headlight bezels and attaching hardware, new door handles, and new rear cab molding.

With in the next month I plan have on having the interior painted, seat recovered, new dash pad, and new carpeting. I am excited!

Keith

[rsavage]

Pulled the 307 from the Burb. Now I'll clean up the engine bay and install the 350. Received the Goodmark rockers Friday for the Blazer. Thia week heading to Mich. to bring home a parts Blazer.

[swamp rat]

Originally Posted by bossermj

Anyways, we get a lot of rain in WA this time of year so looking for temporary carport. Single car garage is full at the moment with a Model A.

Check with Pep Boys if your looking for the inexpensive aluminum tube frame and tarp variaty, they usually have the lowest price. Whatever you buy make sure its fastened down to the ground, fence and even your truck this winter as the wind will want to take it away, I use bike tie down straps and rope, and pep boys even carries ground screws that are nothing more than dog runner lead screws from a pet store but they work.

[Cisco714]

Finally finished tearing out all the original ducting for the A\C and heater. Taped/ pappered everything up and now ready to start sanding and primer, sometime this week. As soon as I get a chance I'll post up some pics.

[lil hoodlum]

I've had another productive day! I finally had some time to take the grill out and sand it down smooth and paint it white. I also installed new head light bezels and my new chevy bowtie.

Everything had been coming along smoothly which is definitely nice!

Keith

[FRENCHBLUE72]

Got my radiator black from eastwood today so I can match my e fan shroud to the radiator..

[nickp51chevy]

I went out and got this old radio for $10, and ya it works

[67Slider]

Worked on the bed wood today. Cut it all down to size. I still need to notch the boards. But its looking like a truck bed again.
[IMG][/IMG]



Best part is both my sons worked on this with me.
[IMG][/IMG]

[tantrumpipeline]

bed looks nice, I opened up all 8 boxes from CPP drooled a bit, turned the heater on in the shop, dropped off my lower ball joints to be pressed in and as soon as they are ready I pick them up and head into a hopefully somewhat warm shop and start painting all the new parts and final coat my frame in preparation for the rest of my parts needed to do the install of all my parts

[id_unavailable]

put a new hei distributer in. The old rotor moved about a 1/4 inch. The rotor was hitting the contacts in the cap. How it ran is beyond me.

67 slider I like the bed. Most people avoid knots but for some reason I like the character.

[Ironangel]

Hung the fenders(temporarily)after installing the headers, and painted the new floor pans and rockers. Then reistalled the seat. getting ready to freshen up the fuel and light that posi up!

[Sillyoldman]

I walked by mine and ran my hand down the side as I went outside to work on the septic system.

[67Slider]

Originally Posted by tantrumpipeline

bed looks nice, I opened up all 8 boxes from CPP drooled a bit, turned the heater on in the shop, dropped off my lower ball joints to be pressed in and as soon as they are ready I pick them up and head into a hopefully somewhat warm shop and start painting all the new parts and final coat my frame in preparation for the rest of my parts needed to do the install of all my parts

Almost 80 in Colorado today. Unheard of. Worked in the yard this morning and worked in the garage with the door wide open all day. Kids are still outisde playing without coats at 6PM.

[60ratrod]

Damn, you guys are having a mild winter. My dad did say that it has been rather mild so far. Anyway i made a dump run in my 72. I need to get some sound insulation in that thing
Posted via Mobile Device