68 S/C update..... - Page 42 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

djracer · 07-10-2013, 10:55 PM

I would put the battery in the rt rear corner. It would help with weight transfer!
Posted via Mobile Device

Greywolf200 · 07-11-2013, 09:34 AM

Quote:

Originally Posted by djracer

i would put the battery in the rt rear corner. It would help with weight transfer!
posted via mobile device

x2

502ms · 07-11-2013, 09:58 AM

Wow! This truck has come a long way! Awesome! As someone with a LSx swapped truck, I can tell you that you will love it! ESPECIALLY since you are boosted! Woohoo! Vids ASAP!

**Hart_Rod** · 07-11-2013, 12:00 PM

Quote:

Originally Posted by knomadd

I guess the better question would have been, where's the starter at on the new engine? Is it still on the passenger side?

How is the factory battery cable routed in the newer truck/camaro if the starter is on the passenger side and the battery is on the drivers side? Something to think about... If the starter is on the drivers side, then all of my previous comments are pointless. Just curious how you'd do it, that's all.

All good questions!

Quote:

Originally Posted by BucksSS

I believe that cable runs from junction block mounted on the side of the alternator bracket down and around the front of the oil pan then back to the starter, on the passenger side of the engine.

I believe you are correct,

.

Quote:

Originally Posted by davidhelgesen

Just finished reading the whole thread front to back and I've gotta say you do some amazing work. You've got a great truck and I can't wait to see it fire up again.
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by djracer

I would put the battery in the rt rear corner. It would help with weight transfer!
Posted via Mobile Device

, somehow I knew you would say that Kevin.

Quote:

Originally Posted by Greywolf200

x2

Quote:

Originally Posted by 502ms

Wow! This truck has come a long way! Awesome! As someone with a LSx swapped truck, I can tell you that you will love it! ESPECIALLY since you are boosted! Woohoo! Vids ASAP!

Thanks!

**Hart_Rod** · 07-11-2013, 06:01 PM

I got some more parts in today. The Caddy tranny pan should give me about another inch or so of ground clearance. Also, I didn't want to use the Camaro plastic e-pedal, so I called John at Speartech and he recommend using an 05 and up Corvette pedal. So I picked up a brand new GM one off Ebay for only $50 shipped,

. I should be able to modify my pedal mount that I got from ROKCRWLN to make it fit in the truck easily. Best thing is, the rubber pedal pad is exacly identical to the 71-72 Truck pedal pad!!!!!! I was able to pull the CST trim off of my old pedal and it fit on the new pedal pad perfectly

NewType72 · 07-11-2013, 06:08 PM

Wow that's crazy that the vette pedal is the same my shops 06 kodiak has that same pedal as our old trucks as well guess ill add the vettes to that list as well

Posted via Mobile Device

VA72C10 · 07-11-2013, 07:55 PM

that's cool on the pedal! I'm making notes for my next truck (when I can afford one

) It'll get an LS as soon as I can....

knomadd · 07-11-2013, 08:26 PM

That's awesome! I hope I remember that when I finally get around to doing an LS swap in my 71. Looks great!
Posted via Mobile Device

jorgensensc · 07-11-2013, 08:42 PM

That's incredible. I need to see what all is involved in switching my pedal over. I know the connector is different. Anything else special I would need to do?
Posted via Mobile Device

Rusbuilt · 07-11-2013, 09:22 PM

Very nice!

**Hart_Rod** · 07-11-2013, 09:54 PM

Quote:

Originally Posted by NewType72

Wow that's crazy that the vette pedal is the same my shops 06 kodiak has that same pedal as our old trucks as well guess ill add the vettes to that list as well

Posted via Mobile Device

Who would have thought?

Quote:

Originally Posted by VA72C10

that's cool on the pedal! I'm making notes for my next truck (when I can afford one

) It'll get an LS as soon as I can....

Notes are good,

Quote:

Originally Posted by knomadd

That's awesome! I hope I remember that when I finally get around to doing an LS swap in my 71. Looks great!
Posted via Mobile Device

Just let me know,

.

Quote:

Originally Posted by jorgensensc

That's incredible. I need to see what all is involved in switching my pedal over. I know the connector is different. Anything else special I would need to do?
Posted via Mobile Device

I'm not sure on the connector. How many wires go into yours? I bet you could call PSI and ask him what you would need to do to convert it. I'm going to have John at Speartech build it into my harness.

Quote:

Originally Posted by Rusbuilt

Very nice!

Thanks Rus!

Here's a few pictures of the mock up mount that I built out of aluminum. I just wanted to make sure I liked the pedal placement. Now, I'll build another out of 3/16th steel.

C10_ustacould · 07-11-2013, 11:17 PM

Looks great! Moving right along...

**Hart_Rod** · 07-12-2013, 09:20 AM

Quote:

Originally Posted by BucksSS

Looks great! Moving right along...

Thanks! Here's the link to the pedal.

http://www.ebay.com/itm/2005-2013-Ch...#ht_142wt_1399

I made an offer of $50 and they accepted. Plus is was free shipping!

STOCKISH · 07-12-2013, 09:27 AM

Thats awesome with the pedal. So cool the trim fits. Who would have thought 40 years later GM is still using the same parts! Well, not really but cool none the less!

**Hart_Rod** · 07-13-2013, 07:49 AM

Quote:

Originally Posted by 1972SuperCheyenne

Thats awesome with the pedal. So cool the trim fits. Who would have thought 40 years later GM is still using the same parts! Well, not really but cool none the less!

Thanks! I couldn't believe it either until I put the CST trim on it. No sense reinventing the wheel (erh pedal...

), if you don't have to....

.

I got the pieces cut for the transmission mount and will be working on getting it finished up this weekend.

raull · 07-14-2013, 10:50 AM

Cool mods Rob !!!
Posted via Mobile Device

Rusbuilt · 07-14-2013, 11:54 AM

Nice work as always Rob!

texastrendz · 07-14-2013, 01:06 PM

I was wondering if you can show me how you routed your fuel lines from the frame rails to the fuel rails. I am having a hard time routing mine without the exhaust being a problem. Awesome work as always. Thanks Daniel.

floppydoodle · 07-14-2013, 01:18 PM

^^x2!!
Posted via Mobile Device

SeTx67 · 07-14-2013, 08:20 PM

Awesome build! I've taken a lot of notes between this thread and a few others. I'm still in the planning phases but the motor has been ordered. Any interest in making another gas pedal mount when you make yours? I can't wait to see it finished
Posted via Mobile Device

**superflysteiny** · 07-15-2013, 11:13 AM

A lot of great work is being done here

**Hart_Rod** · 07-15-2013, 11:15 AM

Quote:

Originally Posted by raull

Cool mods Rob !!!
Posted via Mobile Device

Thanks Raul! Still waiting on pictures of yours...

Quote:

Originally Posted by Rusbuilt

Nice work as always Rob!

Thanks Rus!

Quote:

Originally Posted by superflysteiny

A lot of great work is being done here

Thanks Eric!

Quote:

Originally Posted by texastrendz

I was wondering if you can show me how you routed your fuel lines from the frame rails to the fuel rails. I am having a hard time routing mine without the exhaust being a problem. Awesome work as always. Thanks Daniel.

Thanks Daniel. I haven't finished the fuel lines on this one yet. But if you look at the Burb, you can see what I did there. I'll post some pictures when I get that part done.

Quote:

Originally Posted by floppydoodle

^^x2!!
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by SeTx67

Awesome build! I've taken a lot of notes between this thread and a few others. I'm still in the planning phases but the motor has been ordered. Any interest in making another gas pedal mount when you make yours? I can't wait to see it finished
Posted via Mobile Device

Thanks! Let me get the final version of the pedal adapter built and I'll see what I can do.

SeTx67 · 07-15-2013, 11:28 AM

Quote:

Originally Posted by Hart_Rod

Thanks! Let me get the final verstion of the pedal adapter built and I'll see what I can do.

No problem. It's no rush on my end. The only thing I have is a engine and trans at the moment. I still have a mountain of other parts to research and buy so it'll be months before I actually start the swap. If it's a issue I completely understand. Thanks
Posted via Mobile Device

mcbassin · 07-15-2013, 01:14 PM

Very nice work on the pedal. Too bad it only works for 2005 up. I had to hack my 2003 HERE pedal to make it work.

jrdv · 07-17-2013, 01:30 PM

Looking great! I like the six pack holder.

The caddy tranny cover swap is nice. I noticed when I did my mock up that it does hang a little low!

If you would hurry up and finish yours, you could take a vacation back to NM and help me finish mine!

John

07-10-2013, 10:55 PM	#1026
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: 68 S/C update..... I would put the battery in the rt rear corner. It would help with weight transfer! Posted via Mobile Device __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

07-11-2013, 09:58 AM	#1028
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: 68 S/C update..... Wow! This truck has come a long way! Awesome! As someone with a LSx swapped truck, I can tell you that you will love it! ESPECIALLY since you are boosted! Woohoo! Vids ASAP! __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

07-11-2013, 06:01 PM	#1030
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: 68 S/C update..... I got some more parts in today. The Caddy tranny pan should give me about another inch or so of ground clearance. Also, I didn't want to use the Camaro plastic e-pedal, so I called John at Speartech and he recommend using an 05 and up Corvette pedal. So I picked up a brand new GM one off Ebay for only $50 shipped, . I should be able to modify my pedal mount that I got from ROKCRWLN to make it fit in the truck easily. Best thing is, the rubber pedal pad is exacly identical to the 71-72 Truck pedal pad!!!!!! I was able to pull the CST trim off of my old pedal and it fit on the new pedal pad perfectly Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-11-2013, 06:08 PM	#1031
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: 68 S/C update..... Wow that's crazy that the vette pedal is the same my shops 06 kodiak has that same pedal as our old trucks as well guess ill add the vettes to that list as well Posted via Mobile Device __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

07-11-2013, 07:55 PM	#1032
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 68 S/C update..... that's cool on the pedal! I'm making notes for my next truck (when I can afford one ) It'll get an LS as soon as I can.... __________________ Looking for a 67-72 swb or blazer project in or around VA.

07-11-2013, 08:26 PM	#1033
knomadd Registered User Join Date: Jul 2012 Location: Rosenberg, Texas Posts: 3,506	Re: 68 S/C update..... That's awesome! I hope I remember that when I finally get around to doing an LS swap in my 71. Looks great! Posted via Mobile Device __________________ -Duane C/10 Club Texas member 1971 Chevy C10 "Brutus" SWB Fleetside 2016 6.0L (L96) 6L90E (driver/project) 1965 Pontiac GTO "Royal Goat" 400/TH400 w/AC (my baby)

07-11-2013, 08:42 PM	#1034
jorgensensc Registered User Join Date: Jul 2003 Location: Cypress, Tx Posts: 4,005	Re: 68 S/C update..... That's incredible. I need to see what all is involved in switching my pedal over. I know the connector is different. Anything else special I would need to do? Posted via Mobile Device __________________ 1972 C20 Suburban- Big Blue Betty '56 Chevy Bel Air Sedan- Frame up Restoration -What would you attempt to achieve if you knew you could not fail?- -I Refuse To Tiptoe Through Life, Only To Arrive Safely At Death's Door- R.I.P. EAST SIDE LOW LIFE

07-11-2013, 09:22 PM	#1035
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 68 S/C update..... Very nice! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

07-11-2013, 11:17 PM	#1037
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: 68 S/C update..... Looks great! Moving right along... __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

07-12-2013, 09:27 AM	#1039
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 68 S/C update..... Thats awesome with the pedal. So cool the trim fits. Who would have thought 40 years later GM is still using the same parts! Well, not really but cool none the less! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with. Last edited by STOCKISH; 07-12-2013 at 09:28 AM. Reason: I cant spell

07-14-2013, 10:50 AM	#1041
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 68 S/C update..... Cool mods Rob !!! Posted via Mobile Device __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

07-14-2013, 11:54 AM	#1042
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: 68 S/C update..... Nice work as always Rob! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

07-14-2013, 01:06 PM	#1043
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: 68 S/C update..... I was wondering if you can show me how you routed your fuel lines from the frame rails to the fuel rails. I am having a hard time routing mine without the exhaust being a problem. Awesome work as always. Thanks Daniel.

07-14-2013, 01:18 PM	#1044
floppydoodle Registered User Join Date: Feb 2010 Location: louisiana Posts: 130	Re: 68 S/C update..... ^^x2!! Posted via Mobile Device

07-14-2013, 08:20 PM	#1045
SeTx67 Registered User Join Date: May 2013 Location: Lumberton, TX Posts: 795	Re: 68 S/C update..... Awesome build! I've taken a lot of notes between this thread and a few others. I'm still in the planning phases but the motor has been ordered. Any interest in making another gas pedal mount when you make yours? I can't wait to see it finished Posted via Mobile Device



Register or Log In To remove these advertisements.

07-15-2013, 11:13 AM	#1046
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 68 S/C update..... A lot of great work is being done here __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

07-15-2013, 01:14 PM	#1049
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 68 S/C update..... Very nice work on the pedal. Too bad it only works for 2005 up. I had to hack my 2003 HERE pedal to make it work. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group Last edited by mcbassin; 07-15-2013 at 03:09 PM.

07-17-2013, 01:30 PM	#1050
jrdv Registered User Join Date: Apr 2000 Location: new mexico Posts: 948	Re: 68 S/C update..... Looking great! I like the six pack holder. The caddy tranny cover swap is nice. I noticed when I did my mock up that it does hang a little low! If you would hurry up and finish yours, you could take a vacation back to NM and help me finish mine! John __________________ 1972 3/4T 4x4 Chevrolet (383) 1971 c-10 SWB (400 sb) 1972 4x4 Blazer 1969 SWB 4x4 GMC Projects: 1972 stepside 4x4 http://67-72chevytrucks.com/vboard/s...d.php?t=280132 http://67-72chevytrucks.com/vboard/s...d.php?t=285952 http://67-72chevytrucks.com/vboard/s...d.php?t=553672 http://67-72chevytrucks.com/vboard/s...d.php?t=522704

Register or Log In To remove these advertisements.