Ok Boys and Girls it's Storytime - Page 42 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

regan wilson · 06-15-2022, 08:51 AM

Quote:

Originally Posted by mongocanfly

These sucky gas prices are killing everything...
But I'm still amazed at all the people running up and down the road..like gas was a dollar a gallon
My plant job is on the local river bank..boats running all day..
They must have some deep pocketa

Tulsa is a 620 mile round trip for me. My Diesel and Generator Gas cost for this trip was over $460.00. Topeka is a 1000 mile round trip. Ugg

regan wilson · 06-23-2022, 05:46 PM

Well if anyone wants to come hang out I’m going to be at Xtreme Raceway tomorrow evening.

SCOTI · 06-23-2022, 07:38 PM

Quote:

Originally Posted by regan wilson

Well if anyone wants to come hang out I’m going to be at Xtreme Raceway tomorrow evening.

Tomorrow huh? I just might be able to swing out that way. Fridays was more 'run whatcha' brung' deals @ Sat was class/spec racing from what I remember.

Are they doing something different like qualifying for something happening on Saturday?

regan wilson · 06-24-2022, 06:27 AM

They just have Test and Tune plus a Gamblers Race listed. I'm just needing to try something different on the starting line.

regan wilson · 06-25-2022, 04:23 PM

Well that Idea didn't work. It was good to hang out with Scott for a little while. At least after I changed back to my more normal setup the truck went two 7.59's @ 121mph in the 1/8th. Good to see you Scott

SCOTI · 06-25-2022, 06:09 PM

Quote:

Originally Posted by regan wilson

Well that Idea didn't work. It was good to hang out with Scott for a little while. At least after I changed back to my more normal setup the truck went two 7.59's @ 121mph in the 1/8th. Good to see you Scott

Yes sir. Thanks for the grub on top of hanging out for a bit.
I was hoping things worked out for ya. She's a BEAST regardless.

regan wilson · 07-04-2022, 05:04 PM

Happy 4th of July everyone. I wish I was racing somewhere instead of sitting in the house. But then I I don't ! It's hot as hell outside in Texas.

SCOTI · 07-04-2022, 09:45 PM

Quote:

Originally Posted by regan wilson

Happy 4th of July everyone. I wish I was racing somewhere instead of sitting in the house. But then I I don't ! It's hot as hell outside in Texas.

Yes. It. Is.

regan wilson · 07-09-2022, 08:30 AM

After feeling like I was going to croak from the heat in Tulsa. I decided it was time to fix my power windows. My passenger side window hasn't worked in a few years and I have always had to assist my drivers side window into the top of the track by hand. That was due to the regulators not being mirror images of each other and the drivers side is at the wrong angle. I was able to find what I needed and got all my parts Thursday. I started on the passenger side yesterday and though I would get it knocked out pretty quick. Well I got a little done and had enough for the day. It's kinda hard to just go back and duplicate something the built 15 years ago. It wont take long to finish the passenger side. the drivers side is going to be a little more complicated but I'll figure it out. Photobucket has changed their site up so it will be easier they claim. I'm trying to post pics.

regan wilson · 07-09-2022, 08:37 AM

regan wilson · 07-09-2022, 08:41 AM

regan wilson · 07-09-2022, 08:42 AM

regan wilson · 07-09-2022, 09:08 AM

On another note I stumbled upon pictures of a truck that has a lot in common with my vision for my C-50. The bed in particular from the rounded corners on the front to the dove style wooden bed. I plan on reusing the oak out of my grain bed and painting it. I also want the rear track to be narrower even if means having to narrow an AAM or Dana to make it work. I'm not going to critique this guys truck though it's too cool.

**mongocanfly** · 07-09-2022, 01:25 PM

Man..that's a slick 50...like that bed..I had given thought to doing a 1950s AD 6400 truck and always thought a rounded corner bed would "fit" the trucks style..but as long as my C30 holds out ,I'm covered for a towing truck ..
Are those power window actuators custom? Or is that a factory style setup..
I'm thinking power windows for my future project..

regan wilson · 07-09-2022, 11:01 PM

Quote:

Originally Posted by mongocanfly

Man..that's a slick 50...like that bed..I had given thought to doing a 1950s AD 6400 truck and always thought a rounded corner bed would "fit" the trucks style..but as long as my C30 holds out ,I'm covered for a towing truck ..
Are those power window actuators custom? Or is that a factory style setup..
I'm thinking power windows for my future project..

Greg my old ones were Ididit universal regulators. The new ones are Autoloc brand. I’ll post a pic of the new drivers side versus the hacked up one before I start chopping on it. The pic of the two I posted was my old passenger side with no motor in it. I had to pull the motor to take it apart. It was burned up. They would be pretty easy on an old AD truck since it wouldn’t have the crazy angles to deal with.

**mongocanfly** · 07-10-2022, 02:52 AM

that autoloc system looks nice.. not cheap.. but it looks like a good setup..

regan wilson · 07-11-2022, 06:39 AM

Well I got the passenger side working but it's not perfect. I had to grind on the top of the window some to get it close to flush with the door. It goes up and down correctly but needs some tweaking. It sounds like it's in a bind.

regan wilson · 07-11-2022, 06:42 AM

Now onto the drivers side. This is what I had to start with. This side has to be totally reengineered. The motor pointing the opposite direction will allow me to get the window to seat correctly in the top of the window channel.

regan wilson · 07-11-2022, 06:52 AM

I trimmed the regulator as needed then started measuring for placement. There is quite a bit of difference from the old one to the new. After an hour of contemplating the different options I just bolted it to the door and started moving it around. After two or three hours of fighting it I had to walk away from it. If I was younger I may have been throwing tools. The angles will drive you crazy. I'll work on it some more today. What I thought was going to be a weekend project will probably take me the rest of the week before I'm happy with it. But if it last another 15 years I'll be 71 by then Lol.

regan wilson · 07-11-2022, 07:00 AM

Quote:

Originally Posted by mongocanfly

that autoloc system looks nice.. not cheap.. but it looks like a good setup..

They have some nice kits. These universal regulators and a couple of new switches were a little over $200.00 from Summit with my Pro Shop discount.

**mongocanfly** · 07-11-2022, 07:41 AM

Yeah, I spent some spare time last night at work looking at them ..
When I googled it, the one that came up was the one touch flat glass kit..$500
https://www.autoloc.com/catalog/Powe...rank-Switches-
Last night I was seeing all the options, and was curious which kit you were using..
I'm kinda wondering about doing the IH now..the stock window regs arnt the greatest thing

regan wilson · 07-11-2022, 08:56 PM

Quote:

Originally Posted by mongocanfly

Yeah, I spent some spare time last night at work looking at them ..
When I googled it, the one that came up was the one touch flat glass kit..$500
https://www.autoloc.com/catalog/Powe...rank-Switches-
Last night I was seeing all the options, and was curious which kit you were using..
I'm kinda wondering about doing the IH now..the stock window regs arnt the greatest thing

I'm sure those old regulators are worn out and impossible to replace. I ended up with spare time early this morning and this afternoon and got mine lined out. It was driving me crazy thinking about it. I have a few projects in order for Blue and the Dodge before the next race. It was a relief to get that out of the way.

**mongocanfly** · 07-11-2022, 10:52 PM

Good deal..!
Actually I have a set of the IH regs that look new...hard to believe for them to be over 65yrs old
But now I have way more than 2 doors..haha and the others arnt near as good

regan wilson · 07-31-2022, 08:37 PM

Well it's official I can't drive for Sh*t. I made it through first round in Topeka only to Redlight by .004 in the second round. Then for some stupid reason I just flinched bad in the first round of the second race. It was so bad I didn't even stop to get the timeslip. I gained 10 points in the end.

regan wilson · 08-31-2022, 08:26 AM

I haven't logged in for awhile. No updates really. I have made the decision to hang it up for the year. I haven't even unloaded the truck since Topeka. I had Slick Rick order me some new valves. I'm hoping they wont take too long to get here as mine are worn out. We are going to a DLC coated titanium valve. He says they will last a long time. I always thought the seats went away on the valve job. I had it backwards. Rick told me the berylium copper seats eat away the margin of the valve. With a coated valve it will keep the valve job in check for seasons instead of 60 or 70 passes. I was going to enter Super Comp at the Fall Nationals just for fun but I waited too long and it filled up. Maybe it wasn't a good idea anyway.Lol

06-23-2022, 05:46 PM	#1027
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Well if anyone wants to come hang out I’m going to be at Xtreme Raceway tomorrow evening. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

06-24-2022, 06:27 AM	#1029
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime They just have Test and Tune plus a Gamblers Race listed. I'm just needing to try something different on the starting line. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

06-25-2022, 04:23 PM	#1030
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Well that Idea didn't work. It was good to hang out with Scott for a little while. At least after I changed back to my more normal setup the truck went two 7.59's @ 121mph in the 1/8th. Good to see you Scott __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-04-2022, 05:04 PM	#1032
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Happy 4th of July everyone. I wish I was racing somewhere instead of sitting in the house. But then I I don't ! It's hot as hell outside in Texas. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-09-2022, 08:30 AM	#1034
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime After feeling like I was going to croak from the heat in Tulsa. I decided it was time to fix my power windows. My passenger side window hasn't worked in a few years and I have always had to assist my drivers side window into the top of the track by hand. That was due to the regulators not being mirror images of each other and the drivers side is at the wrong angle. I was able to find what I needed and got all my parts Thursday. I started on the passenger side yesterday and though I would get it knocked out pretty quick. Well I got a little done and had enough for the day. It's kinda hard to just go back and duplicate something the built 15 years ago. It wont take long to finish the passenger side. the drivers side is going to be a little more complicated but I'll figure it out. Photobucket has changed their site up so it will be easier they claim. I'm trying to post pics. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-09-2022, 08:37 AM	#1035
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-09-2022, 08:41 AM	#1036
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-09-2022, 08:42 AM	#1037
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-09-2022, 09:08 AM	#1038
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime On another note I stumbled upon pictures of a truck that has a lot in common with my vision for my C-50. The bed in particular from the rounded corners on the front to the dove style wooden bed. I plan on reusing the oak out of my grain bed and painting it. I also want the rear track to be narrower even if means having to narrow an AAM or Dana to make it work. I'm not going to critique this guys truck though it's too cool. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-09-2022, 01:25 PM	#1039
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Ok Boys and Girls it's Storytime Man..that's a slick 50...like that bed..I had given thought to doing a 1950s AD 6400 truck and always thought a rounded corner bed would "fit" the trucks style..but as long as my C30 holds out ,I'm covered for a towing truck .. Are those power window actuators custom? Or is that a factory style setup.. I'm thinking power windows for my future project.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

07-10-2022, 02:52 AM	#1041
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Ok Boys and Girls it's Storytime that autoloc system looks nice.. not cheap.. but it looks like a good setup.. __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

07-11-2022, 06:39 AM	#1042
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Well I got the passenger side working but it's not perfect. I had to grind on the top of the window some to get it close to flush with the door. It goes up and down correctly but needs some tweaking. It sounds like it's in a bind. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-11-2022, 06:42 AM	#1043
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Now onto the drivers side. This is what I had to start with. This side has to be totally reengineered. The motor pointing the opposite direction will allow me to get the window to seat correctly in the top of the window channel. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-11-2022, 06:52 AM	#1044
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime I trimmed the regulator as needed then started measuring for placement. There is quite a bit of difference from the old one to the new. After an hour of contemplating the different options I just bolted it to the door and started moving it around. After two or three hours of fighting it I had to walk away from it. If I was younger I may have been throwing tools. The angles will drive you crazy. I'll work on it some more today. What I thought was going to be a weekend project will probably take me the rest of the week before I'm happy with it. But if it last another 15 years I'll be 71 by then Lol. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

07-11-2022, 07:41 AM	#1046
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Ok Boys and Girls it's Storytime Yeah, I spent some spare time last night at work looking at them .. When I googled it, the one that came up was the one touch flat glass kit..$500 https://www.autoloc.com/catalog/Powe...rank-Switches- Last night I was seeing all the options, and was curious which kit you were using.. I'm kinda wondering about doing the IH now..the stock window regs arnt the greatest thing __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver



Register or Log In To remove these advertisements.

07-11-2022, 10:52 PM	#1048
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,670	Re: Ok Boys and Girls it's Storytime Good deal..! Actually I have a set of the IH regs that look new...hard to believe for them to be over 65yrs old But now I have way more than 2 doors..haha and the others arnt near as good __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver

07-31-2022, 08:37 PM	#1049
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Well it's official I can't drive for Sh*t. I made it through first round in Topeka only to Redlight by .004 in the second round. Then for some stupid reason I just flinched bad in the first round of the second race. It was so bad I didn't even stop to get the timeslip. I gained 10 points in the end. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

08-31-2022, 08:26 AM	#1050
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime I haven't logged in for awhile. No updates really. I have made the decision to hang it up for the year. I haven't even unloaded the truck since Topeka. I had Slick Rick order me some new valves. I'm hoping they wont take too long to get here as mine are worn out. We are going to a DLC coated titanium valve. He says they will last a long time. I always thought the seats went away on the valve job. I had it backwards. Rick told me the berylium copper seats eat away the margin of the valve. With a coated valve it will keep the valve job in check for seasons instead of 60 or 70 passes. I was going to enter Super Comp at the Fall Nationals just for fun but I waited too long and it filled up. Maybe it wasn't a good idea anyway.Lol __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

Register or Log In To remove these advertisements.