What did you do to your truck today part II. - Page 43 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Revoh · 07-21-2014, 10:17 AM

Quote:

Originally Posted by markeb01

Yes, congrats on the win!

Thank you!

1963c-10 · 07-21-2014, 10:18 AM

Quote:

Originally Posted by Revoh

I'll have to go home and measure. It's the normal half-ton style that goes all the way out to the edge, so whatever that is. If you have an extra chrome one, I'd definitely like to buy it from you. I sure hate that I lost it, but I guess that's the way it goes sometimes.

Thanks!

Yeah, its the 10 5/8" cap then. I'll look when I get home. I have 2 complete sets...one for each truck and caps for the trailer project plus 1 for each spare. I think I have an extra one in there though. Will know tonight.

Worst case....I did see a single for sale on ebay last night. Saw a pretty dented up set of 4 also.

**TJ's Chevy** · 07-21-2014, 10:21 AM

Congrats on the win!

**TJ's Chevy** · 07-21-2014, 10:22 AM

Quote:

Originally Posted by Dillon Rock

How's that engines top end looking?

Looks fine...won't know till I have it checked for cracks. lol!

Revoh · 07-21-2014, 10:48 AM

Quote:

Originally Posted by 1963c-10

Yeah, its the 10 5/8" cap then. I'll look when I get home. I have 2 complete sets...one for each truck and caps for the trailer project plus 1 for each spare. I think I have an extra one in there though. Will know tonight.

Worst case....I did see a single for sale on ebay last night. Saw a pretty dented up set of 4 also.

Sounds good--I appreciate you looking into it! I've been all over eBay and can't find a chrome one (saw the set $$$$), but maybe I just searched wrong.

Quote:

Originally Posted by T.J. MCCAULEY

Congrats on the win!

Thanks!

1963c-10 · 07-21-2014, 10:50 AM

Quote:

Originally Posted by Revoh

Sounds good--I appreciate you looking into it! I've been all over eBay and can't find a chrome one (saw the set $$$$), but maybe I just searched wrong.

Thanks!

I'll see if I can find the single cap in case I don't have an extra. The set looks ok, but a lot of dents and he tries to get high $$$ on all his caps.

schpeen · 07-22-2014, 08:18 AM

ordered my Altman Easy Latch kit today

**steveb64** · 07-22-2014, 09:37 AM

You will like those latches. Clean looking and work great. Oh, and safe too.

schpeen · 07-22-2014, 09:45 AM

Quote:

Originally Posted by steveb64

You will like those latches. Clean looking and work great. Oh, and safe too.

I have to slam the door so hard to get it to close the inside door handle popped off onto the floor so I knew I had to do something! My friend has a new Mercedes and you just click the door shut and power motors draw the door in tight! pretty slick for sure but I figured the Altman route would be fine. LOL

**pimpston65** · 07-22-2014, 02:44 PM

check'd clearance on my shroud, perfect fit...

1963c-10 · 07-22-2014, 03:24 PM

nice....looks great

robber grin · 07-22-2014, 11:05 PM

Added my homemade tins to the gap I had between my wheel tubs and bedsides since raising the floor 3", drilled the sides for the change in mounting hole locations, then ran some 5/16th" butyl along all the edges, and installed them in the bed with sstl bolts.

Happy Birthday to me - rg

tincan1966 · 07-22-2014, 11:19 PM

Prepped the new engine/trans combo to be installed this weekend for the new owner of my daily driver '65.

robber grin · 07-24-2014, 09:17 AM

Chased the threads on my tailgate trunnion and chain mounting points, then installed an old GMC gate that I have until I get the Chevy one ready to go.

rg

robber grin · 07-25-2014, 08:32 AM

Tried a spare GMC tail gate just to see how everything lined up & looked then started reworking the Chevy gate that needs both ends replaced.

rg

1961Apache · 07-25-2014, 09:05 AM

Repaired the Ranco heater valve in my 61 c20. Got the part at NAPA.
Takes time and patience, but cheaper than having it rebuilt.

Andice · 07-25-2014, 07:11 PM

I installed a remote spare tire filler hose. Now I can check and fill the spare tire from the upper hole in the rear license plate.

**pimpston65** · 07-25-2014, 07:16 PM

Quote:

Originally Posted by Andice

I installed a remote spare tire filler hose. Now I can check and fill the spare tire from the upper hole in the rear license plate.

forget the spare, that truck is Da' Bomb. WOW oh so pretty!!! me likey alot...

Andice · 07-25-2014, 07:31 PM

Well thank you! I like it too. It runs great and is a pleasure to drive - but completely stock so no power anything.

**pimpston65** · 07-25-2014, 07:34 PM

Quote:

Originally Posted by Andice

Well thank you! I like it too. It runs great and is a pleasure to drive - but completely stock so no power anything.

as it should be, bigblock 6. post some centerfold shots inside cab,engine bay i used stockers as a reference on my build. it may be GMC but alot carries over to the chevy boys...

VonDog · 07-25-2014, 07:43 PM

Installed a 1" phenolic spacer and cured the heat soak issues I've been having.

Andice · 07-25-2014, 07:58 PM

Don't have many interior shots but here is one before the instrument cluster was replated and here is an underhood shot before the front end sheetmetal was attached.

**pimpston65** · 07-25-2014, 08:00 PM

Quote:

Originally Posted by Andice

Don't have many interior shots but here is one before the instrument cluster was replated and here is an underhood shot before the front end sheetmetal was attached.

i hate you, that truck is awesome 100points fersure

Andice · 07-25-2014, 08:03 PM

I also installed the drivers side door check today. I used a GM part ($$) to replace the aftermarket crap that I had installed 18 months ago. Both aftermarket door checks failed after very little use. Both have been replaced now with GM 3794798.

**pimpston65** · 07-25-2014, 08:08 PM

Quote:

Originally Posted by Andice

I also installed the drivers side door check today. I used a GM part ($$) to replace the aftermarket crap that I had installed 18 months ago. Both aftermarket door checks failed after very little use. Both have been replaced now with GM 3794798.

again i hate u, i have aftermarket ones. where did u get the oem ones from?

07-21-2014, 10:21 AM	#1053
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: What did you do to your truck today part II. Congrats on the win! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

07-22-2014, 08:18 AM	#1057
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: What did you do to your truck today part II. ordered my Altman Easy Latch kit today

07-22-2014, 09:37 AM	#1058
steveb64 Active Member Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: What did you do to your truck today part II. You will like those latches. Clean looking and work great. Oh, and safe too.

07-22-2014, 02:44 PM	#1060
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,193	Re: What did you do to your truck today part II. check'd clearance on my shroud, perfect fit... Attached Images

07-22-2014, 03:24 PM	#1061
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: What did you do to your truck today part II. nice....looks great __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

07-22-2014, 11:05 PM	#1062
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today part II. Added my homemade tins to the gap I had between my wheel tubs and bedsides since raising the floor 3", drilled the sides for the change in mounting hole locations, then ran some 5/16th" butyl along all the edges, and installed them in the bed with sstl bolts. Happy Birthday to me - rg Attached Images

07-22-2014, 11:19 PM	#1063
tincan1966 Registered User Join Date: Oct 2010 Location: Independence,KS Posts: 1,477	Re: What did you do to your truck today part II. Prepped the new engine/trans combo to be installed this weekend for the new owner of my daily driver '65.

07-24-2014, 09:17 AM	#1064
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today part II. Chased the threads on my tailgate trunnion and chain mounting points, then installed an old GMC gate that I have until I get the Chevy one ready to go. rg

07-25-2014, 08:32 AM	#1065
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today part II. Tried a spare GMC tail gate just to see how everything lined up & looked then started reworking the Chevy gate that needs both ends replaced. rg Attached Images

07-25-2014, 09:05 AM	#1066
1961Apache Registered User Join Date: Jun 2014 Location: Wichita, Ks. Posts: 20	Re: What did you do to your truck today part II. Repaired the Ranco heater valve in my 61 c20. Got the part at NAPA. Takes time and patience, but cheaper than having it rebuilt.

07-25-2014, 07:11 PM	#1067
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: What did you do to your truck today part II. I installed a remote spare tire filler hose. Now I can check and fill the spare tire from the upper hole in the rear license plate. Attached Images

07-25-2014, 07:31 PM	#1069
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: What did you do to your truck today part II. Well thank you! I like it too. It runs great and is a pleasure to drive - but completely stock so no power anything. Attached Images

07-25-2014, 07:43 PM	#1071
VonDog Registered User Join Date: Jul 2013 Location: Phoenix, AZ Posts: 348	Re: What did you do to your truck today part II. Installed a 1" phenolic spacer and cured the heat soak issues I've been having. Attached Images

07-25-2014, 07:58 PM	#1072
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: What did you do to your truck today part II. Don't have many interior shots but here is one before the instrument cluster was replated and here is an underhood shot before the front end sheetmetal was attached. Attached Images

07-25-2014, 08:03 PM	#1074
Andice Registered User Join Date: Oct 2009 Location: Austin, Texas Posts: 241	Re: What did you do to your truck today part II. I also installed the drivers side door check today. I used a GM part ($$) to replace the aftermarket crap that I had installed 18 months ago. Both aftermarket door checks failed after very little use. Both have been replaced now with GM 3794798.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.