![]() |
![]() |
#1051 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Here’s a pic of the rivets and the setting tool. These hold the swivel on the frame of the glass to the main outer frame. This is a solid flush fit aircraft style rivet. They sell the tips or attachments to run the air hammer.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios Last edited by smokedat; 07-15-2018 at 12:00 AM. |
![]() |
![]() |
![]() |
#1052 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
I started disassembling the vent windows, I removed the handle by just pushing out the pin then I drilled out the frame rivet. The glass and frame are in good shape just need a good clean up.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1053 |
Registered User
Join Date: Mar 2016
Location: Cbus, Ohio
Posts: 290
|
Re: LS1 into a 73 cheyenne
I found it easier to remove the 2 rivets that hold the hinge to the frame. Then you can just use 2 regular rivets to put it back together.
__________________
'78 C10 Build |
![]() |
![]() |
![]() |
#1054 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Sneek peek on the dash and gauges. I had a really hard time deciding on the gauges and dash. I decided to go with the classic original look minus the ulpostery on the ceiling and cab columns, everything will be exposed painted.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios Last edited by smokedat; 07-19-2018 at 11:19 PM. |
![]() |
![]() |
![]() |
#1055 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
I have herd of this method but I think it’s easier to sand and paint, paint won’t shrink and crack at the hinge joint? Just my thought I would imagine it would.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1056 |
Registered User
Join Date: Nov 2015
Location: Cailfornia
Posts: 284
|
Re: LS1 into a 73 cheyenne
Hey do you paint for a living? I'm looking for someone to paint my 77 properly...I'm in the 805 also.
__________________
77 C10 Silverado SWB - LS Swap, mechanical resto-mod 05 Z71 Silverado RCSB - 5.3L LM7, 76mm turbo, 4L80e |
![]() |
![]() |
![]() |
#1057 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: LS1 into a 73 cheyenne
Nice progress on everything Alex! I like the new gauges too!
![]() Where did you buy those rivets for your vent windows? I found the replacement ones I bought were too small and too long. I made my own Here |
![]() |
![]() |
![]() |
#1058 | |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Quote:
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
|
![]() |
![]() |
![]() |
#1059 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Looks awesome great work on the rivets, did u replace the chrome handle? I got some new handles with the lock button there nice but I kinda don’t dig that the outside button is painted black not chrome.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1060 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
So I managed to strip and pint the frames on the vent windows, I used a small orbital with 180 and a softer wire wheel, brown and red scotch brite's. Over all he frames where in excellent shape the small glass frame had a few rust deposits in the flat area where water would accumulate. I cleaned them with solvent paint prep the used a good direct to metal primer and final paint coat of PCL flat black.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios Last edited by smokedat; 07-22-2018 at 11:47 AM. |
![]() |
![]() |
![]() |
#1061 | |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: LS1 into a 73 cheyenne
Quote:
Anyway, I bought new old stock chrome handles to put on my vent windows. However, they were in the wrong box or seller had the wrong part number(not sure). They wouldn't fit the shafts on the vent.... This was like 4 years ago. I ended up just using the ugly pitted ones. It's still on my list of small items to fix. |
|
![]() |
![]() |
![]() |
#1062 | |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Quote:
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
|
![]() |
![]() |
![]() |
#1063 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
So the blocking has been extensive some areas needed a bit more attention than I anticipated, but everything is straight and panel gaps and alignment are good.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1064 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
And here we are with a Deltron coat
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1065 |
Registered User
Join Date: Nov 2014
Location: Omaha
Posts: 558
|
Re: LS1 into a 73 cheyenne
![]() |
![]() |
![]() |
![]() |
#1066 |
Registered User
Join Date: Jul 2011
Location: Kent, WA.
Posts: 837
|
Re: LS1 into a 73 cheyenne
Wow! Very impressive build and congratulations to you and your family with the baby.
|
![]() |
![]() |
![]() |
#1067 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,559
|
Re: LS1 into a 73 cheyenne
Looks good...Jim
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#1068 |
Registered User
Join Date: Nov 2015
Location: Cailfornia
Posts: 284
|
Re: LS1 into a 73 cheyenne
A few questions... are you painting the interior/ dash hull? Will you run no side mirrors or will you drill the holes for those later? Why didn't you paint all the parts separately so you could paint the bed section behind the cab, as well as the underside of the cab and underside of bed?
__________________
77 C10 Silverado SWB - LS Swap, mechanical resto-mod 05 Z71 Silverado RCSB - 5.3L LM7, 76mm turbo, 4L80e |
![]() |
![]() |
![]() |
#1069 | |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Quote:
This was the final blocking stage so all the front clip and bed needed to be on to block and transition the crease lines and match the panel alignment. The bed was in because it already had primer behind can and bed. As for the bottom of cab and bed it was painted silver with POR 15. After this the truck will be disassembled and painted seperatly. After fire wall is painted I will drop engine in the hang the front clip and enclose the engine, so I don’t risk any damage dropping the engine in over with front clip on. As far as under the wheel wells and front tubs they will be flat black.
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
|
![]() |
![]() |
![]() |
#1070 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Thanks
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1071 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios |
![]() |
![]() |
![]() |
#1072 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
Volatile Organic Compounds. One last pic of the material
__________________
Alex - Dirty AL "One Piece at a Time" Follow me on Instagram alex.barr.ios Last edited by smokedat; 08-06-2018 at 11:56 PM. |
![]() |
![]() |
![]() |
#1073 |
Registered User
Join Date: Nov 2009
Location: santa paula Ca
Posts: 772
|
Re: LS1 into a 73 cheyenne
PPG Deltron DBU. Now banned in CA .
Last edited by smokedat; 08-07-2018 at 12:13 AM. Reason: Double post |
![]() |
![]() |
![]() |
#1074 |
Registered User
Join Date: Nov 2014
Location: Omaha
Posts: 558
|
Re: LS1 into a 73 cheyenne
![]() |
![]() |
![]() |
![]() |
#1075 |
Still Learning
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
|
Re: LS1 into a 73 cheyenne
Very cool!
|
![]() |
![]() |
![]() |
Bookmarks |
Tags |
73c10, c10, cheyenne, ls1, swap |
|
|