The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1967 - 1972 Chevrolet & GMC Pickups Message Board > 67-72 Chevrolet & GMC Pickups Projects and Builds

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 06-10-2013, 11:58 AM   #1
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

We got home last night after a 12 hour marathon drive. We were both looking forward to sleeping in our own beds. The truck ran great, but not flawlessly. It was an outstanding way to do a shakedown cruise. No big problems, never took a tool out of the bag. It has a shake in the front suspension which has never been rebuilt. I had planned to do that this coming winter. It comes and goes, usually around 45-55, sometimes again around 65. Nothing some new bushings and rod ends won't cure. It used some oil, some was leaked, some probably burnt, but not enough to notice in the exhaust. It also lost some coolant but I couldn't find a leak anywhere. I know the cap lifted, but it never got hot. New cap, but maybe it's a bad one. I mentioned before the windshield leaks and wipers chatter. Outside of those items we never had a problem.

1607 miles, over 100 gallons of gas (averaged 14.8 mpg yesterday driving 70 mph the entire time), listening to either the wind and exhaust note or some tunes, whichever fit our mood. Great friends, great food, great ride, great weather, great fun. Now my girls are jealous their brother got to learn to shoot so they both want to go now. I can't wait to do it again.

Time for some pics.

Glamour shot...


One of the first big bridge crossings of the Mississippi


Welcome to MO.


Saw this rig going into St Louis. Some kind of Bronco conversion, or maybe crewcab conversion. Kind of different. Had a soft top up front, hard top in back I think.


Our first stop in St Louis, parking down at the riverfront. The water was a bit high. Lower level of the parking garage was flooded. You can see a sign in the water in front of the truck.


Of course we went to the arch.


A couple views from up top.



Double arches...


After this we had lunch downtown, walked around, then headed out to my friends place. We came back to St Louis the next day to eat at one of the top rated BBQ joints in the city, Pappys Smokehouse. It was excellent, I highly recommend it. Then we went to Anheuser Busch to take the tour.




On the way out...


The next morning we did some shooting. I have a couple rifles, but don't hunt or shoot regularly. So this was really the first time my son got to learn to shoot. Damon is a certified instructor and shoots in the cowboy shooting competitions. We started small with a .22 lever action. Donovan liked it so much that he went back to it later and wants to buy one now.


Then we shot some hand guns, starting with a Walther P22 auto. Then a .38 revolver and finally a 9mm auto. He did real well with all of them, must be all those video games . We worked up to the one every gamer wants to try, the AK-47. (its not fully auto, not allowed in IL)



But that's not all. Far from it. This little popper was built by Damon and has the same bore size as a golf ball.


It goes BOOM!


We both did a bunch of riding on the ATV's (Donovan) and dirt bikes (me, which I discovered I really really like). There was a party celebrating Damons son graduating from high school and for a house warming because they are now officially moved out of the city. I met lots of good people, drank some beer, ate way too much food, stayed up way too late BS'ing and had the best time I can remember in a long while.

Sunday morning we BS'ed some more (2 day party) ate a huge breakfast and hit the road.


Lots of gas, oil and water later, the truck was fantastic and is back in its stall.


As you can see, this truck was built for driving. No trailer queen here.


If you have a car or truck you love, and a friend or family member to share it with, don't hesitate, get that damn thing out of the garage and drive the hell out of it. You will not regret it.
hgs_notes is offline   Reply With Quote
Old 06-10-2013, 01:18 PM   #2
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

X2. Looks like a great trip, glad ya made it in one piece!
Low Elco is offline   Reply With Quote
Old 06-10-2013, 01:19 PM   #3
VA72C10
VA72C10
 
VA72C10's Avatar
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

great pics and writeup. Sounds like a BLAST!
__________________
Looking for a 67-72 swb or blazer project in or around VA.
VA72C10 is offline   Reply With Quote
Old 06-10-2013, 08:56 PM   #4
Bomp
Registered User
 
Bomp's Avatar
 
Join Date: Apr 2011
Location: .
Posts: 3,104
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Great times. Best ride. Eating, shootin' the s**t ,guns, cannons, arch, music, great times.
Awesome memories. Gotta come out west next time.
Bomp is offline   Reply With Quote
Old 06-10-2013, 11:12 PM   #5
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by Low Elco View Post
X2. Looks like a great trip, glad ya made it in one piece!
I had my share of doubts, but figured I could handle any problems that came up.

Quote:
Originally Posted by VA72C10 View Post
great pics and writeup. Sounds like a BLAST!
A loud BLAST indeed. His first cannon was made from a piece of shotgun barrel found in a barn pile of scrap. He has a few, this one is the biggest.

Quote:
Originally Posted by Bomp View Post
Great times. Best ride. Eating, shootin' the s**t ,guns, cannons, arch, music, great times.
Awesome memories. Gotta come out west next time.
Been there, done that. I used to live in the western Washington area, twice. Was in Bremerton in my Navy daze, then was a boiler inspector from Everett north to the border, including the islands. I lived on Camano Island. I do still have friends and family there and the thought has crossed my mind more than once for a trip to the ocean.

Hows about you getting bompenstien on the road and head to the old stomping grounds of Courtland, MN?
hgs_notes is offline   Reply With Quote
Old 07-09-2013, 11:22 AM   #6
mcbassin
Still Learning
 
mcbassin's Avatar
 
Join Date: Jul 2009
Location: Central Oklahoma
Posts: 10,108
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Awesome trip! thanks for sharing the story and pics.
mcbassin is offline   Reply With Quote
Old 07-09-2013, 12:49 PM   #7
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Workin'! I like it!
Low Elco is offline   Reply With Quote
Old 07-09-2013, 10:48 PM   #8
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by Bomp View Post
So nice to see a truck getting used as a truck.
Yep, just need to be careful and not do stupid stuff and it will stay nice.

Quote:
Originally Posted by mcbassin View Post
Awesome trip! thanks for sharing the story and pics.
It was fun and I wish I could do another one now. Instead I will probably go fishing. Picked up the water pump impeller today and an anchor. Should have the boat running tomorrow night.

Quote:
Originally Posted by Low Elco View Post
Workin'! I like it!
Absofreakinlutely

I'm working on fixing up my diningroom, and getting the boat ready, and need to fix my sons blazer again (something with the MAP sensor is off), and daughters softball twice this week, and oh yeah, working to pay the bills. Might still paint that Jimmy one of these days also.
hgs_notes is offline   Reply With Quote
Old 07-21-2013, 03:06 AM   #9
TennesseeZ
Countdown Survivor
 
TennesseeZ's Avatar
 
Join Date: Aug 2007
Location: Bean Station, East Tennessee
Posts: 9,676
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

I'm on pg 14 of this one. I did not realize how much work you were doing on this one as you were working on the Jimmy, somehow I thought it was basically done and you were having it painted. Had no idea you had 2 projects in this stage at the same time. I'm super impressed!
__________________
93 Yukon
89 Silverado Z71 SWB Sport
91 K 2500 Silverado "Lobuk-Worktruk"

A MAN OF HONOR DOES NOT LIE, CHEAT, OR STEAL, NOR TOLERATE THOSE WHO DO.

Gettin' old ain't for sissies.
TennesseeZ is offline   Reply With Quote
Old 07-21-2013, 10:53 AM   #10
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by TennesseeZ View Post
I'm on pg 14 of this one. I did not realize how much work you were doing on this one as you were working on the Jimmy, somehow I thought it was basically done and you were having it painted. Had no idea you had 2 projects in this stage at the same time. I'm super impressed!
Thanks. I had the Jimmy as a side project when I got tired of staring at this one. This one actually gets done though. Happy ending!
hgs_notes is offline   Reply With Quote
Old 07-25-2013, 11:42 PM   #11
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

When I closed the garage up for the night and there was just 1 dim bulb shining down I thought it looked cool, so tried to take some pics with different lighting and some minor editing. No update on this, I was sanding the Jimmy






hgs_notes is offline   Reply With Quote
Old 08-04-2013, 07:44 PM   #12
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Alright, major update coming. I've been working on this particular thing for a long time and it's finally done. These parts were bought long, long ago in a land far, far away. Well, ok, I got the one thing at a swap meet last year, but anyway, I found the part I bought to complete this project when I was cleaning out the Jimmy and figured I better do it before I forgot again. So here goes... I worked furiously (ok, I got off my ass and just did it) for like 10 minutes to install the new grommet in the valve cover so my new chevy bowtie breather would fit in the hole. And replaced the wingnut on the air cleaner lid with a fancy schmancy one. Why did it take 10 minutes you ask? Well it was dirty so I spent about 8 minutes wiping it off.



On zee engine...


As for other stuff going on, interior materials for everything except the door panels are in hand. The upholstery lady will be getting to it in the next week or 2 (maybe). And hopefully by then or while thats being done I will be spraying color on the Jimmy.
hgs_notes is offline   Reply With Quote
Old 08-10-2013, 09:57 AM   #13
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

I finally got the last part of my upholstery order delivered. New door panel skins.


Now its just waiting for my turn at the upholstery shop.
hgs_notes is offline   Reply With Quote
Old 08-12-2013, 03:45 PM   #14
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Nice to see you finally got your correct door panel skins!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 08-13-2013, 09:10 AM   #15
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by Dieselwrencher View Post
Nice to see you finally got your correct door panel skins!
Yes it is. Ordered the materials on 4/19. The only reason I wasn't *****ing too much is that the upholstery lady has been too busy to get to mine anyway. Maybe next week, which is perfect timing for me cause I should be painting the jimmy this week.

I pulled my original door panels out of the garage attic and tore off the covers. I need to sandblast and primer them. Maybe I'll have the upholstery lady teach me how to do the door panel covers myself, so I can get a little credit for hands on with the interior. Diehard DIYer.
hgs_notes is offline   Reply With Quote
Old 08-13-2013, 10:20 AM   #16
Low Elco
Registered User
 
Join Date: Apr 2003
Location: Indep, MO
Posts: 5,893
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Scrub the hell out of the steel, primer, etc. Lay out where you want your skin to be on the panel and sharpie the back of the upholstery. Get some 3M Super 77 spray adhesive. Spray the steel and the back of your upholstery. Carefully line up your marks and moosh those dudes together. Slice your crank holes and wrap 'em over. Spray the inner edges and wrap them around and slice to fit the corners. Install and enjoy. Easy Peasy.
Low Elco is offline   Reply With Quote
Old 08-13-2013, 12:05 PM   #17
Bomp
Registered User
 
Bomp's Avatar
 
Join Date: Apr 2011
Location: .
Posts: 3,104
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Sweet door skins.
Bomp is offline   Reply With Quote
Old 08-16-2013, 06:36 PM   #18
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

I found this at a garage sale today. My wife and daughter just laughed and said it was perfect for me.
hgs_notes is offline   Reply With Quote
Old 08-16-2013, 07:18 PM   #19
Palf70Step
State of Confusion!

 
Palf70Step's Avatar
 
Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 47,083
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

__________________
Bill
1970 Chevy Custom/10 LWB Fleetside
2010 Toyota Tacoma PreRunner SR5 Double Cab - DD

Member of Louisiana Classic Truck Club (LCTC)

Bill's Gallery
Life isn't tied with a bow, but it's still a gift.
Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!
Palf70Step is online now   Reply With Quote
Old 08-29-2013, 02:02 PM   #20
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Finally got the call from the upholstery lady this morning. So I ran out (seriously) and pulled the seat, arm rests and dash pad out of the truck. Got the visors out of the parts pile and got it all delivered with the new materials. She will get the seat frames off and leave them for me to pick up so I can clean up the welds and paint them black. Spent about half an hour talking about the details and design. She said it was no problem if I wanted to do some things myself and would guide me as needed. Gotta love small towns and how people will take the time to work with you.

Can't wait to get this done. Been waiting a long time.
Posted via Mobile Device
hgs_notes is offline   Reply With Quote
Old 09-03-2013, 10:58 PM   #21
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

I got the new cable for the driver side seat bracket that releases the back when the bottom is folded forward. And I have most of my welds on the brackets cleaned up. Just about ready to spray them. I stopped by to check the seat progress and she was working on the center arm rest part. It's looking good. And the color is a brighter version of the turquoise I had, with a bit of gloss to it and it's gonna brighten up the interior a little I think. Probably won't be done until next week some time.
hgs_notes is offline   Reply With Quote
Old 09-04-2013, 02:50 PM   #22
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Glad to hear you're getting it done! I'm really anxious to see how it turns out!
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Old 09-06-2013, 07:20 AM   #23
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Quote:
Originally Posted by Dieselwrencher View Post
Glad to hear you're getting it done! I'm really anxious to see how it turns out!
I stopped and looked through the window again and the driver seat is coming along pretty nice. But I'm not going to post any pics until its installed. So you're just gonna have to wait.

I got the seat mounts painted satin black yesterday. If I get home from work in time today I will drop them off for her to mount the cushions back onto when she's ready.
hgs_notes is offline   Reply With Quote
Old 09-11-2013, 12:30 PM   #24
hgs_notes
GEARHEAD
 
hgs_notes's Avatar
 
Join Date: Aug 2003
Location: MN
Posts: 6,125
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Sneak peak of my own upholstery work. Gail showed me how to do it and get the corners right. Not bad if I do say so my self.





Driver side of the seat is about done. I don't know if she'll get the other side done before the weekend.
hgs_notes is offline   Reply With Quote
Old 09-11-2013, 07:30 PM   #25
Dieselwrencher
6>8 Plugless........
 
Dieselwrencher's Avatar
 
Join Date: Sep 2007
Location: Prairie City, Ia
Posts: 17,139
Re: Over 25 Years Later, Finally My 71 C-10 Truck Build

Very nice! Sure beats plain old steel huh?
__________________
Ryan
1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread
1972 GMC Sierra Grande Longhorn 4x4
1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed
1972 C10 Suburban Custom Deluxe
1969 Chevy milk truck
1971 Camaro RS 5.3 BTR STG3 Cam Super T10
1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project


Tired of spark plugs? Check this out.
Dieselwrencher is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 06:03 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com