What did you do to your truck today part IV - Page 44 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SatinSeventy2 · 10-15-2020, 09:11 PM

Mounted my 22” steel wheels today!

**vetnat** · 10-16-2020, 12:55 AM

Quote:

Originally Posted by SatinSeventy2

Mounted my 22” steel wheels today!

Wow! I like it. I don't care for the appearance of black transport wheels, but those look good in a light colour.

**Backpayne** · 10-17-2020, 08:31 PM

Painted her!

**jayoldschool** · 10-17-2020, 08:36 PM

Quote:

Originally Posted by SatinSeventy2

Mounted my 22” steel wheels today!

Consider stripping the black paint off those caps. We did a set of GMC caps like that for buddy's 67 and did the letters in red and they look fantastic.

forestb · 10-17-2020, 08:55 PM

Quote:

Originally Posted by Backpayne

Painted her!

Vary nice. It looks like a Giant plastic model

That’s a complement

**Backpayne** · 10-18-2020, 01:09 PM

Quote:

Originally Posted by forestb

Vary nice. It looks like a Giant plastic model

That’s a complement

Thanks! I used Rustoleum and mixed blue and yellow with white until I got this shade of green. I'm quite happy with how it has turned out!

**MT65** · 10-24-2020, 09:29 AM

Finished the catch can lines and mounted the exhaust to the mufflers....

forestb · 10-24-2020, 05:22 PM

Quote:

Originally Posted by MT65

Finished the catch can lines and mounted the exhaust to the mufflers....

Ooo. Oooo can you install an LS in mine next

forestb · 10-24-2020, 05:23 PM

I installed new rear shocks today. It seems to have helped a little with softening the ride quality but not as much as I would like.

**MT65** · 10-24-2020, 08:29 PM

Got a couple ahead of ya, never say never....

LT1 Burb · 10-25-2020, 09:38 AM

Quote:

Originally Posted by Android04

Gave mine a wash, and Cermanic Coat before Rod Run this weekend.

That looks saweet

LT1 Burb · 10-25-2020, 09:39 AM

All I did was take mine to brunch!

studeclunker · 11-01-2020, 04:12 PM

Quote:

Originally Posted by LT1 Burb

All I did was take mine to brunch!

Fits right in with the surroundings too!

Asshat · 11-04-2020, 07:26 PM

New lining for the E-Brake.

**MT65** · 11-06-2020, 09:19 PM

Got the ac bulkhead in....

**nsb29** · 11-07-2020, 10:41 AM

Quote:

Originally Posted by MT65

Finished the catch can lines and mounted the exhaust to the mufflers....

Where did you get your air intake

**MT65** · 11-07-2020, 02:38 PM

That is the stock system from an 04 GTO, I made the support under the mass air sensor, to carry the sensor and the air cleaner..I had it from the donor car, it works great

raylube · 11-08-2020, 03:04 AM

Getting ready for Dinos git down.Put some penetrol on and replated the bed.

**The Rocknrod** · 11-08-2020, 09:13 AM

Nice engine compartment raylube.

AcampoDave · 11-15-2020, 08:38 PM

I used my leftover exhaust parts to build an H-pipe. It was tricky since I run my pipes outside of the frame. I put it just under the crossmember for the e-brake mechanism. It works good too. It killed the resonance from the exhaust and knocked a couple of decibels off. The welds look pretty rough, but since I pulled the headpipes to do it, I filled them up with water, marked the leaks and passed over them one more time with the ol' Harbor Freight wire feed so as to get it sealed up. Not too bad for an old "poolguy" though I'd say.

gulfcoast66 · 11-15-2020, 09:17 PM

I Finally Found An Original Tailgate at the Right Price... She has a Few Dents, But I couldn't Wait to Install it, All New LMC Hardware..

**MT65** · 11-21-2020, 08:54 AM

Finished wiring on back panel...

**PORKY** · 11-28-2020, 02:28 PM

2020 though not a good year for many of us, we did make some progress on the truck.
If it hadn’t been for Covid we would have finished it mid-summer.
We were able to get the following done -
• Body side molding installed
• Dash installed and all switches hooked up and operable.
• Radio installed.
• Fenders, header panel, grill, installed.

**PORKY** · 11-28-2020, 02:35 PM

And a few more things we did.
• Tailgate letters in.
• Hood scuffed and buffed and ready for installation.
• Door panels and seats upholstered and ready for installation.
• Power windows hooked up and operable

LostMy65 · 11-28-2020, 04:38 PM

Quote:

Originally Posted by PORKY

And a few more things we did.
• Tailgate letters in.
• Hood scuffed and buffed and ready for installation.
• Door panels and seats upholstered and ready for installation.
• Power windows hooked up and operable

What are those seats from?
I like that they look a lot like buddy buckets.

10-15-2020, 09:11 PM	#1076
SatinSeventy2 Registered User Join Date: Mar 2017 Location: Auburn, KY Posts: 85	Re: What did you do to your truck today part IV Mounted my 22” steel wheels today! Attached Images

10-17-2020, 08:31 PM	#1078
Backpayne Senior Member Join Date: Nov 2015 Location: Seligman, MO Posts: 642	Re: What did you do to your truck today part IV Painted her! Attached Images

10-24-2020, 09:29 AM	#1082
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 445	Re: What did you do to your truck today part IV Finished the catch can lines and mounted the exhaust to the mufflers.... Attached Images

10-24-2020, 05:23 PM	#1084
forestb Registered User Join Date: Jan 2009 Location: Burbank, CA Posts: 3,619	Re: What did you do to your truck today part IV I installed new rear shocks today. It seems to have helped a little with softening the ride quality but not as much as I would like.

10-24-2020, 08:29 PM	#1085
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 445	Re: What did you do to your truck today part IV Got a couple ahead of ya, never say never....

10-25-2020, 09:39 AM	#1087
LT1 Burb Registered User Join Date: Sep 2010 Location: Winchester Oregon, formerly Vancouver BC Posts: 2,949	Re: What did you do to your truck today part IV All I did was take mine to brunch! Attached Images

11-04-2020, 07:26 PM	#1089
Asshat Registered User Join Date: Jul 2015 Location: South Orange County CA Posts: 1,265	Re: What did you do to your truck today part IV New lining for the E-Brake. Attached Images __________________ 1963 C20, small window, long bed 292, 4-speed

11-06-2020, 09:19 PM	#1090
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 445	Re: What did you do to your truck today part IV Got the ac bulkhead in.... Attached Images

11-07-2020, 02:38 PM	#1092
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 445	Re: What did you do to your truck today part IV That is the stock system from an 04 GTO, I made the support under the mass air sensor, to carry the sensor and the air cleaner..I had it from the donor car, it works great

11-08-2020, 03:04 AM	#1093
raylube Registered User Join Date: Jan 2012 Location: Preston Idaho Posts: 279	Re: What did you do to your truck today part IV Getting ready for Dinos git down.Put some penetrol on and replated the bed. Attached Images

11-08-2020, 09:13 AM	#1094
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: What did you do to your truck today part IV Nice engine compartment raylube. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

11-15-2020, 08:38 PM	#1095
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,776	Re: What did you do to your truck today part IV I used my leftover exhaust parts to build an H-pipe. It was tricky since I run my pipes outside of the frame. I put it just under the crossmember for the e-brake mechanism. It works good too. It killed the resonance from the exhaust and knocked a couple of decibels off. The welds look pretty rough, but since I pulled the headpipes to do it, I filled them up with water, marked the leaks and passed over them one more time with the ol' Harbor Freight wire feed so as to get it sealed up. Not too bad for an old "poolguy" though I'd say. Attached Images

11-15-2020, 09:17 PM	#1096
gulfcoast66 64-66 CHEVY JUNKIE Join Date: Apr 2007 Location: Cypress ,Texas Posts: 1,516	Re: What did you do to your truck today part IV I Finally Found An Original Tailgate at the Right Price... She has a Few Dents, But I couldn't Wait to Install it, All New LMC Hardware.. Attached Images __________________ 1966 C-10 Fleetside LWB, 350 Lt1 4l60-E 2008 Silverado Crew Cab, 4.8 4l60-E 1998 GMC Yukon 4x4 L-31 Vortec, 4l60-E 2017 GMC Serra 4x4 5.3 Vortec, 4l60-E Do It In A Chevrolet

11-21-2020, 08:54 AM	#1097
MT65 Senior Member Join Date: Sep 2020 Location: Kila mt Posts: 445	Re: What did you do to your truck today part IV Finished wiring on back panel... Attached Images

11-28-2020, 02:28 PM	#1098
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: What did you do to your truck today part IV 2020 though not a good year for many of us, we did make some progress on the truck. If it hadn’t been for Covid we would have finished it mid-summer. We were able to get the following done - • Body side molding installed • Dash installed and all switches hooked up and operable. • Radio installed. • Fenders, header panel, grill, installed. Attached Images



Register or Log In To remove these advertisements.

11-28-2020, 02:35 PM	#1099
PORKY Registered User Join Date: Nov 2010 Location: LITTLETON NH Posts: 106	Re: What did you do to your truck today part IV And a few more things we did. • Tailgate letters in. • Hood scuffed and buffed and ready for installation. • Door panels and seats upholstered and ready for installation. • Power windows hooked up and operable Attached Images

Register or Log In To remove these advertisements.