1971 c10 stepside - Page 45 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OLDIRON69 · 01-22-2013, 03:46 PM

That was a good read of 44 pages!

raull · 01-28-2013, 01:01 PM

thanks for stopping by !!!!

bigblock68 · 01-30-2013, 09:15 PM

so is the 25-1/4" measurement from the second bed mount to the centerline on the axle still a good reference for a stepside bed??.i havent test fit my bed,its still apart....now i'm worried,my notch is a small bolt in style so are these issues only with the big step notch??didnt mean to hijack this thread but i am worried..

502ms · 01-30-2013, 09:27 PM

This is exciting!

dnd1978 · 01-30-2013, 10:02 PM

I need to finish my truck before you make me start again!! Look great.
Posted via Mobile Device

**lolife99** · 01-30-2013, 11:06 PM

Quote:

Originally Posted by bigblock68

so is the 25-1/4" measurement from the second bed mount to the centerline on the axle still a good reference for a stepside bed??.i havent test fit my bed,its still apart....now i'm worried,my notch is a small bolt in style so are these issues only with the big step notch??didnt mean to hijack this thread but i am worried..

Small notches can be affected also.
Take your springs out and set your stepside bed on.
Then check to see if the wheel is centered in the rear stepside fenders.
Member BucksSS is dealing with this now.

C10_ustacould · 01-31-2013, 12:12 AM

Quote:

Originally Posted by lolife99

Small notches can be affected also.
Take your springs out and set your stepside bed on.
Then check to see if the wheel is centered in the rear stepside fenders.
Member buckss is dealing with this now.

Yep, but mine isn't bagged it's static dropped 6" in the rear. It was noticeable when I had the 15" wheels on it and then magnified 1000% when I put the 22s on. Seems like it is about 1" + or - a .250" too far back in the wheel well. I am working with a board member to secure a trailing arm crossmember that will move the pick up point forward 1.25" in the chassis. I hope that is the answer.

PBFAB.COM · 01-31-2013, 12:03 PM

Quote:

Originally Posted by bigblock68

so is the 25-1/4" measurement from the second bed mount to the centerline on the axle still a good reference for a stepside bed??.i havent test fit my bed,its still apart....now i'm worried,my notch is a small bolt in style so are these issues only with the big step notch??didnt mean to hijack this thread but i am worried..

This is the measurement that we came up with. Lolife helped us determine this along with a couple others just to confirm. It is always a good idea to mock up your components and body parts to confirm the measurement yourself. I am confident that this measurement is "good". But it's always best to measure twice and cut once.

Keep in mind that some of the body tolerance specs from GM on these trucks are + or - 1"!!!!!! That's enough to drive anybody with a tape measure crazy!!! Even more reason to measure and confirm.

raull · 02-12-2013, 09:18 AM

Quote:

Originally Posted by bigblock68

didnt mean to hijack this thread but i am worried..

you are welcome in here anytime !!!

Quote:

Originally Posted by 502ms

This is exciting!

it sure is !!! not !! lol

Quote:

Originally Posted by dnd1978

I need to finish my truck before you make me start again!! Look great.
Posted via Mobile Device

thanks but don't start again , you are way ahead of me !!!

raull · 02-12-2013, 09:27 AM

im back at it again , lots of cutting and grinding last nite , boy i could've used a plasma last nite , i removed the factory trailing arm perches , also removed the cnotch and took 2 1/2 inches off to start , i want to leave a little extra room as i would like to have a second set of rally wheels , next i neet ti do a small cnotch on each side of the bed for the rear end to travel , i will post pix and detail measurements as i go ,

Bennett68C10 · 02-12-2013, 09:33 AM

Nice, can't wait to see some updated pics

raull · 02-12-2013, 09:35 AM

some pix !!

**superflysteiny** · 02-12-2013, 02:47 PM

looks great keep it up

big_al_71 · 02-12-2013, 05:26 PM

Finally you stopped playing with the corvette and got back to the bucket...Glad to see you at it....

Cameron 1137 · 02-12-2013, 06:19 PM

Awesome! Nice to see some progress.

jmedero · 02-15-2013, 09:28 PM

It was cool to see you yesterday. Next time we will plan it so to have more time.
I looked at the car lot on the way out and slowed down... The wife said keep it moving. There is a reason I stay off of car lots. Lol
Posted via Mobile Device

raull · 02-15-2013, 09:48 PM

[QUOTE=superflysteiny;5884274]looks great keep it up[/QUOTE

Thanks !!! Your kicking butt with tootsie !!!!!!!!!
Posted via Mobile Device

raull · 02-15-2013, 09:49 PM

Quote:

Originally Posted by big_al_71

Finally you stopped playing with the corvette and got back to the bucket...Glad to see you at it....

Only 8k miles and already tearing up !!!!
Posted via Mobile Device

raull · 02-15-2013, 09:52 PM

Quote:

Originally Posted by Cameron 1137

Awesome! Nice to see some progress.

Thanks , I want to get it done !!!!

Quote:

Originally Posted by jmedero

It was cool to see you yesterday. Next time we will plan it so to have more time.
I looked at the car lot on the way out and slowed down... The wife said keep it moving. There is a reason I stay off of car lots. Lol
Posted via Mobile Device

Same here bud , hopefully you will have more time next time !!!!!!
Posted via Mobile Device

jmedero · 02-15-2013, 10:43 PM

Next time in driving the nova down.....
Posted via Mobile Device

raull · 02-15-2013, 10:45 PM

Quote:

Originally Posted by jmedero

Next time in driving the nova down.....
Posted via Mobile Device

Don't see why not !!
Posted via Mobile Device

**superflysteiny** · 02-26-2013, 03:03 PM

So is the last picture of the truck ride height

raull · 02-26-2013, 10:13 PM

Quote:

Originally Posted by superflysteiny

So is the last picture of the truck ride height

Lol !!! With the some old school leaf spring track bars
Posted via Mobile Device

Dano69c10 · 02-27-2013, 03:53 PM

subscribed

jblaust · 03-01-2013, 08:57 PM

Quote:

Originally Posted by raull

thanks guys !!!!

im probably going to sell it all, front and back , i got all the parts from ridetech a year ago and installed it , then i went into a stall mode for a bid , if you are interested shoot me a pm , thanks

Hey Raul....Im in West Miramar also. Just bought a 1968 Stepside project partially restored already. Do you still have any of the ridetech stuff available?

01-22-2013, 03:46 PM	#1101
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: 1971 c10 stepside That was a good read of 44 pages! __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

01-28-2013, 01:01 PM	#1102
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside thanks for stopping by !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

01-30-2013, 09:15 PM	#1103
bigblock68 Registered User Join Date: Sep 2007 Location: vancouver,wa. Posts: 282	Re: 1971 c10 stepside so is the 25-1/4" measurement from the second bed mount to the centerline on the axle still a good reference for a stepside bed??.i havent test fit my bed,its still apart....now i'm worried,my notch is a small bolt in style so are these issues only with the big step notch??didnt mean to hijack this thread but i am worried..

01-30-2013, 09:27 PM	#1104
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: 1971 c10 stepside This is exciting! __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

01-30-2013, 10:02 PM	#1105
dnd1978 Registered User Join Date: Jul 2008 Location: Youngsville, La Posts: 591	Re: 1971 c10 stepside I need to finish my truck before you make me start again!! Look great. Posted via Mobile Device __________________ ________________________________ 1972 SWB stepside pro tour build thread http://67-72chevytrucks.com/vboard/s...d.php?t=452840

02-12-2013, 09:27 AM	#1110
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside im back at it again , lots of cutting and grinding last nite , boy i could've used a plasma last nite , i removed the factory trailing arm perches , also removed the cnotch and took 2 1/2 inches off to start , i want to leave a little extra room as i would like to have a second set of rally wheels , next i neet ti do a small cnotch on each side of the bed for the rear end to travel , i will post pix and detail measurements as i go , __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

02-12-2013, 09:33 AM	#1111
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1971 c10 stepside Nice, can't wait to see some updated pics __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-12-2013, 09:35 AM	#1112
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside some pix !! Attached Images __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

02-12-2013, 02:47 PM	#1113
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1971 c10 stepside looks great keep it up __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-12-2013, 05:26 PM	#1114
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Finally you stopped playing with the corvette and got back to the bucket...Glad to see you at it.... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

02-12-2013, 06:19 PM	#1115
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: 1971 c10 stepside Awesome! Nice to see some progress. __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

02-15-2013, 09:28 PM	#1116
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1971 c10 stepside It was cool to see you yesterday. Next time we will plan it so to have more time. I looked at the car lot on the way out and slowed down... The wife said keep it moving. There is a reason I stay off of car lots. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-15-2013, 09:48 PM	#1117
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside [QUOTE=superflysteiny;5884274]looks great keep it up[/QUOTE Thanks !!! Your kicking butt with tootsie !!!!!!!!! Posted via Mobile Device __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

02-15-2013, 10:43 PM	#1120
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1971 c10 stepside Next time in driving the nova down..... Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-26-2013, 03:03 PM	#1122
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1971 c10 stepside So is the last picture of the truck ride height __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell



Register or Log In To remove these advertisements.

02-27-2013, 03:53 PM	#1124
Dano69c10 Senior Member Join Date: Jan 2005 Location: Ontario, Kali Posts: 2,427	Re: 1971 c10 stepside subscribed __________________ '69 Fleet It ain't yours, if you didn't build it!

Register or Log In To remove these advertisements.