1969 SuperBurb build-up (Bagged and Blown!) - Page 45 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Palf70Step** · 01-02-2012, 04:56 PM

Quote:

Originally Posted by Hart_Rod

Same house. 24' x 28'. I'm nibbling away at it. The "shed" will allow me to get stuff out of the way so I have room to work.

It does help, but you'll soon overrun the "little shed" too.

Don't bother to ask how I know

jmedero · 01-02-2012, 09:10 PM

Your rubbing off on me man. I ordered my garage and it's here. Just need some concrete. Lol.

Seats are going to look killer.
Posted via Mobile Device

VA72C10 · 01-02-2012, 09:16 PM

Looking good. I am planning to move where there is some land if/when the housing market improves enough for me to recoup some of my remodeling upgrades....

I want a pole barn or large steel building (or both

)

mcbassin · 01-02-2012, 10:54 PM

I love the buckets Rob. That building is gonna be nice. I'm hoping to break ground this year on mine too. You don't have to worry about hail like we do here though do you? I have had every car/truck in my fleet damaged by hail except the wife's new car. You can't have enough room to stable the Chevys

**Hart_Rod** · 01-05-2012, 11:46 PM

Quote:

Originally Posted by Palf70Step

It does help, but you'll soon overrun the "little shed" too.

Don't bother to ask how I know

I know what you mean,

.

Quote:

Originally Posted by jmedero

Your rubbing off on me man. I ordered my garage and it's here. Just need some concrete. Lol.

Seats are going to look killer.
Posted via Mobile Device

I bet you can't wait.....

Quote:

Originally Posted by VA72C10

Looking good. I am planning to move where there is some land if/when the housing market improves enough for me to recoup some of my remodeling upgrades....

I want a pole barn or large steel building (or both

)

I would go bigger if I had the room...

Quote:

Originally Posted by mcbassin

I love the buckets Rob. That building is gonna be nice. I'm hoping to break ground this year on mine too. You don't have to worry about hail like we do here though do you? I have had every car/truck in my fleet damaged by hail except the wife's new car. You can't have enough room to stable the Chevys

We get hail occasionally, but not often. The extra space will give me some breathing room.

Well, the seat brackets are done so I thought I would bolt everything together one last time before I send the seats out for new covers. I'm pretty happy with the way everything came out. Hard to believe it has taken me over a year to get these done,

. Hopefully this will be the last bit of fabrication that I have to do and now I can just concentrate on putting everything back together,

. Here's a few pics...

jbclassix · 01-06-2012, 01:09 AM

Those look awesome!

Street Smart · 01-06-2012, 09:26 AM

Great looking truck, I love the classic paint scheme and the modern "everthing else".

gringoloco · 01-06-2012, 10:10 AM

The final stretch- hopefully this motivates you- would love to see this thing 'done'
Posted via Mobile Device

**Hart_Rod** · 01-06-2012, 12:31 PM

Quote:

Originally Posted by jbclassix

Those look awesome!

Thanks JB! Hopefully you'll be able to get back on your burb soon....

Quote:

Originally Posted by Street Smart

Great looking truck, I love the classic paint scheme and the modern "everthing else".

Thanks! It's coming together pretty much like I envisioned, I just need to keep pushing.....

Quote:

Originally Posted by gringoloco

The final stretch- hopefully this motivates you- would love to see this thing 'done'
Posted via Mobile Device

Yeah a small step, but it was nice to be able to sit in the seats. Would love to be able to fire the engine up in the next month or two.....

jeffg1010 · 01-06-2012, 05:51 PM

Those front seats already look nice! Is that the pattern you are going with? I am thinking about going that route with my blazer

BIG HEAD · 01-11-2012, 12:41 PM

Is there four cylinders in front of the spindles? Looks like engine is forward a lot.

**Hart_Rod** · 01-11-2012, 01:43 PM

Quote:

Originally Posted by jeffg1010

Those front seats already look nice! Is that the pattern you are going with? I am thinking about going that route with my blazer

Same seats and pattern. I dropped them off at my upholstery guy on Sunday.

Quote:

Originally Posted by BIG HEAD

Is there four cylinders in front of the spindles? Looks like engine is forward a lot.

The #3 and #4 cylinders are about centerline of the front axle. ECE motor mounts place the engine more forward than most of the aftermarket mounts. I believe they do this so you can use the factory truck a/c without having to cut the frame.

greg65 · 01-11-2012, 01:53 PM

Looking good Rob. How is your son's truck coming along.

72BlckButy · 01-11-2012, 03:31 PM

Looks good Rob!

**Hart_Rod** · 01-11-2012, 10:07 PM

Quote:

Originally Posted by greg65

Looking good Rob. How is your son's truck coming along.

Thanks. I've been buying a few parts here and there. I am in the process of building a shop in the back yard so we can have more room to work on it.

Quote:

Originally Posted by 72BlckButy

Looks good Rob!

Thanks! Step by step....

BB72CHEVKT · 01-13-2012, 11:41 AM

That seat set up is friggin awesome and a mod I would definately do if it was in the budget.

Daaaanz67 · 01-13-2012, 02:21 PM

Wow this is an awesome build. I have read this post a couple time already. I am currently doing an ls conversion also in my69 c/10. Currently using ece mounts, I was just wondering on post 475 what year exactly is that ctsv pan you are using and what dip stick tube assembly since you are using the dt headers. Are there any differences in the ctsv pan based on year
Posted via Mobile Device

**Hart_Rod** · 01-14-2012, 12:39 AM

Quote:

Originally Posted by BB72CHEVKT

That seat set up is friggin awesome and a mod I would definately do if it was in the budget.

Thanks!

Quote:

Originally Posted by Daaaanz67

Wow this is an awesome build. I have read this post a couple time already. I am currently doing an ls conversion also in my69 c/10. Currently using ece mounts, I was just wondering on post 475 what year exactly is that ctsv pan you are using and what dip stick tube assembly since you are using the dt headers. Are there any differences in the ctsv pan based on year
Posted via Mobile Device

Thanks. I believe it is an 07 oil pan. I'm using a Lokar dipstick made for the truck LS motor. You'll have to check their website for the part number.
Posted via Mobile Device

Daaaanz67 · 01-14-2012, 11:18 PM

Thanks can you elaborate more on how you connected the trans cooler line to the radiator. It looks like you used the factory lines that came on the motor/ trans. Fittings adapters etc.
Posted via Mobile Device

YBNORML · 01-16-2012, 11:53 PM

Beautiful work! Those seats look awesome, I really like the way you setup the second row. The red/white combo is perfect.

**Hart_Rod** · 01-17-2012, 12:32 PM

Quote:

Originally Posted by Daaaanz67

Thanks can you elaborate more on how you connected the trans cooler line to the radiator. It looks like you used the factory lines that came on the motor/ trans. Fittings adapters etc.
Posted via Mobile Device

Dan I made my own lines and used AN fittings.

Quote:

Originally Posted by YBNORML

Beautiful work! Those seats look awesome, I really like the way you setup the second row. The red/white combo is perfect.

Thanks!

Daaaanz67 · 01-21-2012, 12:42 AM

Thanks, did u go with hard lines with an fittings or soft lines? What radiator/ electric fan did you use? Do you have any photos of trans cooler line installed
Posted via Mobile Device

**Hart_Rod** · 02-11-2012, 04:18 PM

Quote:

Originally Posted by Daaaanz67

Thanks, did u go with hard lines with an fittings or soft lines? What radiator/ electric fan did you use? Do you have any photos of trans cooler line installed
Posted via Mobile Device

I used soft lines and have an Entropy radiator and fan setup. I don't have any pictures of the cooler lines installed yet.

*****

Some progress!!! I got a set of the big tube Thorley to help the supercharger breath a little better (thanks Nick and Jamie)

Also, I finally got the slab poured for my new garage.

**67cheby** · 02-11-2012, 04:20 PM

NICE, congrats on the new shop !!

**Palf70Step** · 02-11-2012, 05:59 PM

01-02-2012, 09:10 PM	#1102
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1969 SuperBurb build-up (Bagged and Blown!) Your rubbing off on me man. I ordered my garage and it's here. Just need some concrete. Lol. Seats are going to look killer. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-02-2012, 09:16 PM	#1103
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looking good. I am planning to move where there is some land if/when the housing market improves enough for me to recoup some of my remodeling upgrades.... I want a pole barn or large steel building (or both ) __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-02-2012, 10:54 PM	#1104
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 SuperBurb build-up (Bagged and Blown!) I love the buckets Rob. That building is gonna be nice. I'm hoping to break ground this year on mine too. You don't have to worry about hail like we do here though do you? I have had every car/truck in my fleet damaged by hail except the wife's new car. You can't have enough room to stable the Chevys __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-06-2012, 01:09 AM	#1106
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: 1969 SuperBurb build-up (Bagged and Blown!) Those look awesome! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

01-06-2012, 09:26 AM	#1107
Street Smart Registered User Join Date: Dec 2009 Location: Brooklyn N.Y. Posts: 819	Re: 1969 SuperBurb build-up (Bagged and Blown!) Great looking truck, I love the classic paint scheme and the modern "everthing else". __________________ 1967 GMC Suburban, Supercharged 6.2 LS with a 6l80e , my 11 second tow vehicle! pic in my profile 1987 GMC CrewCab Dually 6.0 LS/6L90e, new tow pig. http://67-72chevytrucks.com/gallery/...=74049&cat=500

01-06-2012, 10:10 AM	#1108
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: 1969 SuperBurb build-up (Bagged and Blown!) The final stretch- hopefully this motivates you- would love to see this thing 'done' Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-06-2012, 05:51 PM	#1110
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,676	Re: 1969 SuperBurb build-up (Bagged and Blown!) Those front seats already look nice! Is that the pattern you are going with? I am thinking about going that route with my blazer __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

01-11-2012, 12:41 PM	#1111
BIG HEAD Registered User Join Date: Jan 2008 Location: lake city florida Posts: 327	Re: 1969 SuperBurb build-up (Bagged and Blown!) Is there four cylinders in front of the spindles? Looks like engine is forward a lot. __________________ MY POND TRUCK BUILD http://www.67-72chevytrucks.com/vboa...d.php?t=297393

01-11-2012, 01:53 PM	#1113
greg65 Registered User Join Date: Mar 2009 Location: Daphne, Al Posts: 1,120	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looking good Rob. How is your son's truck coming along. __________________ 1965 c-10 swb 1997 c-1500 extended cab 2004 tahoe 1993 mustang gt BUILD THREAD:http://67-72chevytrucks.com/vboard/s...d.php?t=336653

01-11-2012, 03:31 PM	#1114
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks good Rob! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

01-13-2012, 11:41 AM	#1116
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: 1969 SuperBurb build-up (Bagged and Blown!) That seat set up is friggin awesome and a mod I would definately do if it was in the budget. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400

01-13-2012, 02:21 PM	#1117
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: 1969 SuperBurb build-up (Bagged and Blown!) Wow this is an awesome build. I have read this post a couple time already. I am currently doing an ls conversion also in my69 c/10. Currently using ece mounts, I was just wondering on post 475 what year exactly is that ctsv pan you are using and what dip stick tube assembly since you are using the dt headers. Are there any differences in the ctsv pan based on year Posted via Mobile Device

01-14-2012, 11:18 PM	#1119
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: 1969 SuperBurb build-up (Bagged and Blown!) Thanks can you elaborate more on how you connected the trans cooler line to the radiator. It looks like you used the factory lines that came on the motor/ trans. Fittings adapters etc. Posted via Mobile Device

01-16-2012, 11:53 PM	#1120
YBNORML Registered User Join Date: May 2010 Location: Edmonton, Alberta Posts: 3,850	Re: 1969 SuperBurb build-up (Bagged and Blown!) Beautiful work! Those seats look awesome, I really like the way you setup the second row. The red/white combo is perfect. __________________ --------------------------------------------------------------- Jason. 68’ GMC shortbox https://67-72chevytrucks.com/vboard/...d.php?t=794201 72' 2WD Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=425385 67' LongBox C-10 http://67-72chevytrucks.com/vboard/s...d.php?t=691845 InstaGram ybnorml67

01-21-2012, 12:42 AM	#1122
Daaaanz67 Registered User Join Date: Nov 2011 Location: Idaho Posts: 857	Re: 1969 SuperBurb build-up (Bagged and Blown!) Thanks, did u go with hard lines with an fittings or soft lines? What radiator/ electric fan did you use? Do you have any photos of trans cooler line installed Posted via Mobile Device



Register or Log In To remove these advertisements.

02-11-2012, 04:20 PM	#1124
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1969 SuperBurb build-up (Bagged and Blown!) NICE, congrats on the new shop !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-11-2012, 05:59 PM	#1125
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,082	Re: 1969 SuperBurb build-up (Bagged and Blown!) __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

Register or Log In To remove these advertisements.