How about some pics of 60-66 Trucks - Page 45 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 01-16-2010, 02:01 AM

Good start on your project,

jbgroby · 01-16-2010, 12:41 PM

NF65fleetside,

They seemed to be a westcoast option or even midwest, becausue a lot of the truck were used heavily in farming, which makes sense. I'll assume they came chromed from the factory (which makes since as a trim option) IF I use mine I'll need to get them chromed. But I weight about 250 dressed out, so even if I install them, I would be afraid to use them, I would at least put another fender brace under neither the sidewall incase.

Here are pictures of mine.

REDNOSE65 · 01-16-2010, 03:03 PM

Quote:

Originally Posted by nimrod

pretty cool seeing all of your pics. Here's a picture of my '66 stepside project:

good choice...

RatRodBrett · 01-16-2010, 04:07 PM

Hello I'm new to the board and just wanting to show my 66 Chevy to some new people hope you like them.Thanks

RatRodBrett · 01-16-2010, 04:10 PM

This pic was taken day one. Thanks

70 Suburban · 01-16-2010, 04:39 PM

the steps will hold you dont worry.. im about the same and i have them on mine.. both of mine are bare. no paint or chrome

murdoc · 01-17-2010, 03:12 PM

I second that. The steps are mounted in a perfect position, just under the fender brace, making them quite rigid and sturdy. i weight 200 and they dont even flex when i hop on them.

I have em on each side, and although i personally would never have mounted them myself, as large a farming community as idaho is, i can see the reason why they were added. they are priceless for those whose trucks are work trucks.

70 Suburban · 01-17-2010, 09:42 PM

mines not a work truck but i think im going to keep them just for conversation. i also have a cow pusher front bumper

robby5323 · 01-17-2010, 10:16 PM

Here's what I've been working on... "Project Betty" named after my mother. 1965 SWB. 327/350. Cut (1) coil + 3" in front and jeep springs rear. Finally getting her on the road.

Some before and afters...

*CWT* · 01-18-2010, 12:14 PM

Looking good Robby.

70 Suburban · 01-20-2010, 04:55 PM

WELCOME Im from Bryan tx. feel free to hit me up for advise

wing_runner · 01-20-2010, 05:54 PM

Quote:

Originally Posted by 70 Suburban

WELCOME Im from Bryan tx. feel free to hit me up for advise

Thanks for the offer and I will certainly take you up on it.

70 Suburban · 01-20-2010, 10:37 PM

Quote:

Originally Posted by wing_runner

Thanks for the offer and I will certainly take you up on it.

sure come on up. I have a few projects. I have a 66 dd and a 65 crew cab in the works. 5.3 vortec with 4l60. and a 71 blazer.. pretty well equiped shop also

dirtjumper63 · 01-20-2010, 11:52 PM

Hey guys heres a picture of my pickup. have'nt been on this site for awhile, currently swaping in a LQ4 4L80e with a s400 if i don't run outa time before spring

CSoliz · 01-21-2010, 12:25 AM

Quote:

Originally Posted by dirtjumper63

Hey guys heres a picture of my pickup. have'nt been on this site for awhile, currently swaping in a LQ4 4L80e with a s400 if i don't run outa time before spring

What ya got for suspension?

dirtjumper63 · 01-21-2010, 09:14 PM

Quote:

Originally Posted by CSoliz

What ya got for suspension?

It has a early 80s front suspension noched it out a couple inches for better clearance, 3600lb bags on all four corners. trans cross member sits 3/4 inch off ground without air!

terd ferguson · 01-21-2010, 12:51 AM

Quote:

Originally Posted by dirtjumper63

Hey guys heres a picture of my pickup. have'nt been on this site for awhile, currently swaping in a LQ4 4L80e with a s400 if i don't run outa time before spring

That thing is clean! Nice!

REDNOSE65 · 01-21-2010, 06:03 PM

Quote:

Originally Posted by dirtjumper63

Hey guys heres a picture of my pickup. have'nt been on this site for awhile, currently swaping in a LQ4 4L80e with a s400 if i don't run outa time before spring

Good lookin truck...

ol Curt · 01-21-2010, 07:36 PM

Nice trucks and garage rsavage!!

rsavage · 01-20-2010, 05:36 PM

I hang out on the 67-72 board most of the time as I am working on a 70 Burb currently. Here are a couple of pics of my 66

"

"

"

"

RatRodBrett · 01-21-2010, 03:37 PM

More Pics

RatRodBrett · 01-21-2010, 03:47 PM

Lots of plans for summer

REDNOSE65 · 08-20-2010, 01:22 PM

ruffrida2005 · 01-21-2010, 12:53 AM

Man I forgot I saw this one on c10forum, dont know if it's been shown here or not.

jonzcustomshop · 01-21-2010, 09:19 AM

Quote:

Originally Posted by ruffrida2005

Man I forgot I saw this one on c10forum, dont know if it's been shown here or not.

we played around with the idea a bit in this thread...
http://67-72chevytrucks.com/vboard/s...d.php?t=322012

01-16-2010, 02:01 AM	#1
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: How about some pics of 60-66 Trucks Good start on your project, __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

01-16-2010, 12:41 PM	#2
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,770	Re: How about some pics of 60-66 Trucks NF65fleetside, They seemed to be a westcoast option or even midwest, becausue a lot of the truck were used heavily in farming, which makes sense. I'll assume they came chromed from the factory (which makes since as a trim option) IF I use mine I'll need to get them chromed. But I weight about 250 dressed out, so even if I install them, I would be afraid to use them, I would at least put another fender brace under neither the sidewall incase. Here are pictures of mine. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

01-16-2010, 04:07 PM	#4
RatRodBrett Registered User Join Date: Apr 2009 Location: Albany Oregon Posts: 18	Re: How about some pics of 60-66 Trucks Hello I'm new to the board and just wanting to show my 66 Chevy to some new people hope you like them.Thanks Attached Images

01-16-2010, 04:10 PM	#5
RatRodBrett Registered User Join Date: Apr 2009 Location: Albany Oregon Posts: 18	Re: How about some pics of 60-66 Trucks This pic was taken day one. Thanks Attached Images

01-16-2010, 04:39 PM	#6
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: How about some pics of 60-66 Trucks the steps will hold you dont worry.. im about the same and i have them on mine.. both of mine are bare. no paint or chrome __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-17-2010, 03:12 PM	#7
murdoc Registered User Join Date: Mar 2008 Location: nampa, idaho Posts: 332	Re: How about some pics of 60-66 Trucks I second that. The steps are mounted in a perfect position, just under the fender brace, making them quite rigid and sturdy. i weight 200 and they dont even flex when i hop on them. I have em on each side, and although i personally would never have mounted them myself, as large a farming community as idaho is, i can see the reason why they were added. they are priceless for those whose trucks are work trucks.

01-17-2010, 09:42 PM	#8
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: How about some pics of 60-66 Trucks mines not a work truck but i think im going to keep them just for conversation. i also have a cow pusher front bumper __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-17-2010, 10:16 PM	#9
robby5323 Registered User Join Date: Jun 2009 Location: Tyler, Texas Posts: 67	Re: How about some pics of 60-66 Trucks Here's what I've been working on... "Project Betty" named after my mother. 1965 SWB. 327/350. Cut (1) coil + 3" in front and jeep springs rear. Finally getting her on the road. Some before and afters...

01-18-2010, 12:14 PM	#10
CWT Account Suspended Join Date: Jun 2009 Location: ARAB,ALABAMA Posts: 157	Re: How about some pics of 60-66 Trucks Looking good Robby.

01-20-2010, 04:55 PM	#11
70 Suburban Rods Join Date: Nov 2002 Location: Bryan, TX Posts: 1,398	Re: How about some pics of 60-66 Trucks WELCOME Im from Bryan tx. feel free to hit me up for advise __________________ Just keepin it simple. 1965 C-10 Ext cab build. 350??(Does it count at 2 truck if I had to cut one up?) 1966 C-10 lwb 283 auto 1970 Suburban in pieces 1971 Blazer 4wd....restore someday. all factory CST 1972 Blazer 4wd parts truck still a roller 1972 GMC Sierra Grandee 1998 Chevy ext driver. 2005 F**D the wife drive...(cant fix women)

01-20-2010, 11:52 PM	#14
dirtjumper63 Registered User Join Date: Jun 2005 Location: winnipeg Posts: 17	Re: How about some pics of 60-66 Trucks Hey guys heres a picture of my pickup. have'nt been on this site for awhile, currently swaping in a LQ4 4L80e with a s400 if i don't run outa time before spring Attached Images

01-21-2010, 07:36 PM	#19
ol Curt Junior Member Join Date: Dec 2006 Location: Newburgh, IN Posts: 1,247	Re: How about some pics of 60-66 Trucks Nice trucks and garage rsavage!! __________________ 1966 Chevy C10 Longbed I'm Bob....ol Curt was my Grandpa The truck was his and he sure as heck wouldn't understand why I took a perfectly good truck and tore it down!

01-20-2010, 05:36 PM	#20
rsavage Registered User Join Date: Aug 2009 Location: Alden NY Posts: 2,705	Re: How about some pics of 60-66 Trucks I hang out on the 67-72 board most of the time as I am working on a 70 Burb currently. Here are a couple of pics of my 66 "" "" __________________ 1961 C1 Corvette 1959 El Camino 350 TPI, 9" 4 w disc 69 Blazer K5 - sold July '20 2021 Durango RT 5.7

01-21-2010, 03:37 PM	#21
RatRodBrett Registered User Join Date: Apr 2009 Location: Albany Oregon Posts: 18	Re: How about some pics of 60-66 Trucks More Pics Attached Images

01-21-2010, 03:47 PM	#22
RatRodBrett Registered User Join Date: Apr 2009 Location: Albany Oregon Posts: 18	Re: How about some pics of 60-66 Trucks Lots of plans for summer Attached Images Last edited by RatRodBrett; 01-21-2010 at 03:55 PM.



Register or Log In To remove these advertisements.

08-20-2010, 01:22 PM	#23
REDNOSE65 Registered User Join Date: Dec 2009 Location: DALLAS, TEXAS Posts: 1,908	Re: How about some pics of 60-66 Trucks __________________ RED NOSE '65 LOS HITTERS C.C DALLAS, TEXAS The making of a Red Nose... http://www.67-72chevytrucks.com/vboa...d.php?t=396518

01-21-2010, 12:53 AM	#24
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: How about some pics of 60-66 Trucks Man I forgot I saw this one on c10forum, dont know if it's been shown here or not. Attached Images __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

Register or Log In To remove these advertisements.