Hazel the older Sister.... - Page 45 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

big_al_71 · 10-12-2011, 09:23 AM

looking super good.....

**67cheby** · 10-12-2011, 10:20 AM

oh ya....she's PURDY

thor · 10-12-2011, 12:58 PM

So very, very cool!

GVizzle · 10-12-2011, 01:25 PM

Quote:

Originally Posted by babyblueoval

Did you try anything anywhere near lock to lock? Any rubbing? Nate was pretty adament that there would'nt be any tire clearance issues at ride height, about 6" for my set-up, even with my tire size, 275/45x20.

Babyblueoval,

I know on the OLD the AUX Nates gonna run a set of narrower arms up front to help out a little bit with the rubbing while driving low.

Keith,

Are we gonna get to see this thing in Scottsdale? Looks great in the pics but I know it would looks even better in person

crappiewrangler · 10-12-2011, 03:11 PM

W o w !!!!!!!!

wild4wheels · 10-12-2011, 04:39 PM

Keith,

Are we gonna get to see this thing in Scottsdale? Looks great in the pics but I know it would looks even better in person

[/QUOTE]

X2!!!

n2billet · 10-12-2011, 04:46 PM

Quote:

Originally Posted by GVizzle

Babyblueoval,

I know on the OLD the AUX Nates gonna run a set of narrower arms up front to help out a little bit with the rubbing while driving low.

Keith,

Are we gonna get to see this thing in Scottsdale? Looks great in the pics but I know it would looks even better in person

Quote:

Originally Posted by wild4wheels

Keith,

Are we gonna get to see this thing in Scottsdale? Looks great in the pics but I know it would looks even better in person

X2!!![/QUOTE]

Depends on when they schedule me for my surgery, if I don't get it in November I will be there, beside you owe me a drink!

GVizzle · 10-12-2011, 06:17 PM

I probably owe you alotta drinks!!

Posted via Mobile Device

calvin78612 · 10-12-2011, 07:03 PM

You wouldn't happen to work for SWA would you ?

n2billet · 10-12-2011, 08:09 PM

Quote:

Originally Posted by calvin78612

You wouldn't happen to work for SWA would you ?

Nope, I work for RTN.....

ccreddell · 10-12-2011, 10:25 PM

Quote:

Originally Posted by n2billet

Nope, I work for RTN.....

Well, that cleared that up........

babyblueoval · 10-12-2011, 10:30 PM

Quote:

Originally Posted by GVizzle

Babyblueoval,

I know on the OLD the AUX Nates gonna run a set of narrower arms up front to help out a little bit with the rubbing while driving low.

GVizzle,
I'll be running the C4 version so it's different for me. I was just wondering how it was for the normal kit.

Keith,
you mentioned earlier about your turning radius not being that great. That's anouther thing I forgot about. The C4 stuff doesn't have that issue....

calvin78612 · 10-12-2011, 10:32 PM

Yep !

n2billet · 10-12-2011, 10:45 PM

Quote:

Originally Posted by babyblueoval

GVizzle,
Keith,
you mentioned earlier about your turning radius not being that great. That's anouther thing I forgot about. The C4 stuff doesn't have that issue....

Very true........but if the shockwaves don't lift the body above the tire, your turning radius is going to be limited by the body. I beleive you said that your running a 275x45 on the front which is 1.75 inches taller than my tire, what shockwaves are you running and how much lift do they have?

67chevy1series · 10-12-2011, 10:47 PM

so how are you liking the 67? i bet theres alot of thumbs up head turns and stuff? is it driving like you expected?

n2billet · 10-12-2011, 10:53 PM

Quote:

Originally Posted by 67chevy1series

so how are you liking the 67? i bet theres alot of thumbs up head turns and stuff? is it driving like you expected?

Post 1099 sums up the driving/ride......I don't know about the heads turning or thumbs up because I'm to busy listen for stuff that might fall off!

n2billet · 10-12-2011, 10:55 PM

Quote:

Originally Posted by calvin78612

Yep !

So you work for SWA?

calvin78612 · 10-12-2011, 11:14 PM

Just transferred from houston and saw a guy here that looks like you and wasn't sure so thought I would ask.i've been with swa for a little over 10 yrs.
Posted via Mobile Device

babyblueoval · 10-13-2011, 07:44 AM

Quote:

Originally Posted by n2billet

Very true........but if the shockwaves don't lift the body above the tire, your turning radius is going to be limited by the body. I beleive you said that your running a 275x45 on the front which is 1.75 inches taller than my tire, what shockwaves are you running and how much lift do they have?

The shockwaves have 6" of lift but I believe Nate set up my dropmember to ride slightly higher that normal. He said I'd have no problems "at ride hieght, which is 6"" with rubbing. I'll be running the Coy's C5's in 20x8 with 5.5" backspacing all around. I asked Nate numerous times about clearance issues and he said there would be none.........

wicky · 10-13-2011, 10:52 AM

Bad ass truck. What did u use to paint the motor with. Especially the manifolds. They look like they've got 5 coats of clear on em
Posted via Mobile Device

n2billet · 10-13-2011, 12:57 PM

Quote:

Originally Posted by wicky

Bad ass truck. What did u use to paint the motor with. Especially the manifolds. They look like they've got 5 coats of clear on em
Posted via Mobile Device

The block is POR15 (never again) and everything above it is base coat/ clear coat. The exhaust was high temp coated.

Cameron 1137 · 10-13-2011, 04:49 PM

Quote:

Originally Posted by n2billet

The block is POR15 (never again) and the everything above it is base coat/ clear coat. The exhaust was high temp coated.

Why do you say that. did you have troubles with it?

n2billet · 10-13-2011, 04:57 PM

Quote:

Originally Posted by Cameron 1137

Why do you say that. did you have troubles with it?

I should have clarified, I will never try to "spray" POR15 again. It was a mess and I should have just painted the whole motor with auto paint like I always have done but I wanted to try something different.

nevets · 10-13-2011, 05:22 PM

just found this site and following your thread, I have a 1969 GMC, 6 lug juice brake that i am converting to 5 lug disk brake. I really like the new camaro SS wheels, but was wondering if they will fit on the 1969 5 lug rotors. anyone done this??

ccreddell · 10-13-2011, 06:30 PM

Easiest way to do that is to get a C5 Dropmember-it has the correct bolt pattern. Then run either a GM car rear end or go with with a Vette rear end.

10-12-2011, 09:23 AM	#1101
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Hazel the older Sister.... looking super good..... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

10-12-2011, 10:20 AM	#1102
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Hazel the older Sister.... oh ya....she's PURDY __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

10-12-2011, 12:58 PM	#1103
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Hazel the older Sister.... So very, very cool! __________________ 1972 Chevy Blazer CST.....Project: Polished Turd

10-12-2011, 03:11 PM	#1105
crappiewrangler Registered User Join Date: Jul 2011 Location: Athens, AL Posts: 42	Re: Hazel the older Sister.... W o w !!!!!!!!

10-12-2011, 04:39 PM	#1106
wild4wheels Registered User Join Date: Jan 2001 Location: Queen Creek, Arizona Posts: 1,626	Re: Hazel the older Sister.... Keith, Are we gonna get to see this thing in Scottsdale? Looks great in the pics but I know it would looks even better in person [/QUOTE] X2!!! __________________ Dave aka "Wild" Current truck "Ida Mae" 71 K5 Blazer Former Trucks "Loretta" 71 Longbed (AZ) "Tanya" 69 Stepside (AZ) "Ferdinand" 71 Longhorn (SD) "Patches" 67 Panel (IA/ KY) "Rosita" 68 C30 (KY) Instagram @Wildforwheels @k5_klub @c10university Profile pic provided by Jeff Sundance

10-12-2011, 06:17 PM	#1108
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: Hazel the older Sister.... I probably owe you alotta drinks!! Posted via Mobile Device

10-12-2011, 07:03 PM	#1109
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: Hazel the older Sister.... You wouldn't happen to work for SWA would you ? __________________ 84 step side 87 swb

10-12-2011, 10:32 PM	#1113
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: Hazel the older Sister.... Yep ! __________________ 84 step side 87 swb

10-12-2011, 10:47 PM	#1115
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Hazel the older Sister.... so how are you liking the 67? i bet theres alot of thumbs up head turns and stuff? is it driving like you expected?

10-12-2011, 11:14 PM	#1118
calvin78612 Registered User Join Date: Mar 2010 Location: Aledo, Texas Posts: 803	Re: Hazel the older Sister.... Just transferred from houston and saw a guy here that looks like you and wasn't sure so thought I would ask.i've been with swa for a little over 10 yrs. Posted via Mobile Device __________________ 84 step side 87 swb

10-13-2011, 10:52 AM	#1120
wicky Registered User Join Date: Apr 2011 Location: knkxville iowa Posts: 186	Re: Hazel the older Sister.... Bad ass truck. What did u use to paint the motor with. Especially the manifolds. They look like they've got 5 coats of clear on em Posted via Mobile Device

10-13-2011, 05:22 PM	#1124
nevets Registered User Join Date: Jan 2011 Location: huffman, Texas Posts: 9	Re: Hazel the older Sister.... just found this site and following your thread, I have a 1969 GMC, 6 lug juice brake that i am converting to 5 lug disk brake. I really like the new camaro SS wheels, but was wondering if they will fit on the 1969 5 lug rotors. anyone done this??

10-13-2011, 06:30 PM	#1125
ccreddell Registered User Join Date: Sep 2009 Location: Medford, OR. Posts: 207	Re: Hazel the older Sister.... Easiest way to do that is to get a C5 Dropmember-it has the correct bolt pattern. Then run either a GM car rear end or go with with a Vette rear end.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.