Project two tone.

[scdude37]

Originally Posted by TJ's Chevy

Well it's finally time to bring in some updates on this beautiful October monday. Been enjoying having Sundays and Mondays off work as businesses are actually open on one of my days off.

Today I worked on getting the pedal assembly back together with new bushings and 67-72 custom pads to match the lokar pedal.

Decided to keep a more stock look by leaving the cab filler on the truck. Got a new grommet, filler neck, and a sweet locking gas cap.

Also got some parts in and hooked up my clutch linkage.

Small steps closer guyz! Thinking about sand blasting the outer fenders today while it's sunny. Supposed to be sunny and warm all week so may try and get some priming and body work done this weekend.

Where did you get that sweet locking fuel cap? That really pops off that blue paint as well! looking real clean

[Ta2Don]

Lookin' Sweet Brotha!!!

[Palf70Step]

Very Nice

I am thinking of going to a throttle cable on mine, what Lockar pedal/throttle assembly you use?

[TJ's Chevy]

SCDUDE37: Thanks man! I got the cap from Classic Parts of America

Ta2Don: Thanks brotha!

Palf70step: Thanks!! I used this throttle pedal https://www.summitracing.com/parts/l...6149/overview/

This cable
https://www.summitracing.com/parts/lok-tc-1000ht

And this cable to carb mount
https://www.summitracing.com/search?...yword=srk-4000


And the cool thing is that this evening's update has to do with the throttle pedal!

Got the cable cut and the pedal adjusted in. Also blasted the radiator shrouds and started working on the fender but ran out of time and energy. So chillin the rest of the evening before the work week starts tomorrow. And somehow a chainsaw picture got in there. lol All for now gents!

[TJ's Chevy]

Well it's been awhile since I updated.....haven't done anything with the truck for the past few weeks. Weather has been in the 20's....and that means my shop is that temp as well.

But I have ordered more parts....wiring harness from American auto wire should be here Monday and my new steering column is here as well. Going to require some modding to fit so that'll keep me busy for a bit.

Truck is on rollers and I have a nice truck cover for it to keep the dust off. lol

I'll get some pictures for ya soon folks.

[RANDY COX]

WOW T.J. you been going at it.. you can be proud of what you've accomplished so far...I have that same gas pedal I bought early in the yr and still haven't mounted it, thus not being able to kick the 4 barrel Holley in yet as right now I'm only getting maybe 40% throttle, it might actually scare when I do get full throttle with that 402...ya know what I mean...

[TJ's Chevy]

Originally Posted by RANDY COX

WOW T.J. you been going at it.. you can be proud of what you've accomplished so far...I have that same gas pedal I bought early in the yr and still haven't mounted it, thus not being able to kick the 4 barrel Holley in yet as right now I'm only getting maybe 40% throttle, it might actually scare when I do get full throttle with that 402...ya know what I mean...

Thanks Randy! It's been alot of fun! Wiring harness and steering column are here so that makes for some work ahead of me.

Also been having tons of fun restoring or bringing back old chainsaws. At about 13 running now.

I've experienced wot with a 572 powering a 77 c20....it's awesome. lol

[66Submarine]

Getting antsy to hear your rebuilt 292 yet?

That an old Homelite?

[TJ's Chevy]

Originally Posted by 66Submarine

Getting antsy to hear your rebuilt 292 yet?

That an old Homelite?

Been really antsy to hear that 292 haha Days just turned into years!

Yup! Super 77 there, just restored a 770GS and have about 12 other antique saws. Another hobby.

[bj383ss]

T.J. if you don't hurry up I am going to have mine driving before you.

I have all the necessary lines to complete my brakes now and make mine a driver but I haven't had time to install the last line and bleed the brakes. Maybe after Xmas. I also have the skin to fix my driver door and get it put on. All those other life things that get in the way!

Bret

[66C10LB]

Those inner fenders look to be in pretty nice shape. Did you have to do any welding on them?

[TJ's Chevy]

Originally Posted by bj383ss

T.J. if you don't hurry up I am going to have mine driving before you.

I have all the necessary lines to complete my brakes now and make mine a driver but I haven't had time to install the last line and bleed the brakes. Maybe after Xmas. I also have the skin to fix my driver door and get it put on. All those other life things that get in the way!

Bret

You to fast haha! I just need a master cylinder and fluid to get the brakes on mine working. You'll have yers driving way before mine no doubt. lol Lot's of painting and body work to do on mine yet!

Originally Posted by 66C10LB

Those inner fenders look to be in pretty nice shape. Did you have to do any welding on them?

They are pretty decent....I have one small area that will need to be welded. Luckily not to much.

[TJ's Chevy]

Finally got some pictures of the parts that showed up. Drive shaft has also been shortened and balanced. Need some more firewall parts before I can start on the harness....should be getting those soon!

[Ta2Don]

Spaghetti in a box...

Have a Blessed New Year Brotha!!!

[TJ's Chevy]

Originally Posted by Ta2Don

Spaghetti in a box...

Have a Blessed New Year Brotha!!!

Oh yeah! Happy New Year brotha!

[bj383ss]

T.J you have that thing wired yet. I know you have time off right?

Bret

[TJ's Chevy]

Originally Posted by bj383ss

T.J you have that thing wired yet. I know you have time off right?

Bret

I wish! I only had Sunday and Monday off...and the same yesterday and today. Ah well...gonna get the fire wall grommets and pad before I do the wiring. But working on getting the column mounted to see what mods I need to do.

[TJ's Chevy]

Ordered up a brake master cylinder and some other parts. Life has been busy and winter has kept me staying careful with how much money I spend as my job can turn seasonal. Will be starting a new job soon with better pay and even More hours so....MORE TRUCK PARTS!
Small update for now...should have more tomorrow. Clear coated the master cyl to keep it from turning into a pile of rust within a few months.

[61K10]

TJ-- a little progress is better than none. You're doing a great job, no cutting corners now. I see your saws in the background, i have a few myself that i restored. couple of pics (last one is waiting) I have friends that just moved to Grants Pass, if and when i get up there will try and come see your tk if ok.

Stay warm---kimble

[TJ's Chevy]

Thanks Kimble! Those are some nice restorations there....I'd love to have that super d44!

Couple more updates today....got the master cylinder mounted up and am mocking up the steering column. More updates soon folks.

[Ta2Don]

It has been a bit since I've checked in... Looking Great Brotha!!!

You'll be driving this one soon...

[TJ's Chevy]

Originally Posted by Ta2Don

It has been a bit since I've checked in... Looking Great Brotha!!!

You'll be driving this one soon...

Thanks man! Hope to be!

[TJ's Chevy]

More work showed up!

[bj383ss]

Have fun T.J. Why are your toolbox drawers empty and not full of tools? HAHA

Bret

[TJ's Chevy]

Originally Posted by bj383ss

Have fun T.J. Why are your toolbox drawers empty and not full of tools? HAHA

Bret

Thanks BJ....those boxes are the old one from work. Just upgraded to a bigger one as I ran out of tool space!