Do you need '64-'66 Chevy Truck Parts?

[LILRED66]

Originally Posted by PBO

Tony, we started talking about a 64 dash yesterday, just found your site and now that I know you have "inventory" I'm wondering if you have a complete wiring harness for a 64 C-10 Stepsid/ We're runing a 327 w/ Turbo 350. Looking forward to the dash photo. Jim

Good morning Jim and thanks for the inquiry. Are you running a factory gauge cluster or factory warning light cluster?

I have a brand new, factory-fit reproduction harness with the correct fuse block, wiring & terminations. It is still in the original package. It is $300.00, including shipping. I purchased this harness from www.lmctruck.com for $389.95 + tax a few years ago.

A good, used factory underdash harness is $200.00, including shipping. It is complete and in good condition.

I accept PayPal at: 4-5-6chevytrucks@sbcglobal.net

Let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

[LILRED66]

Originally Posted by davidcarver

I'm looking for a short fleetside to fit a 64 chevy. If you have anything email a price and pictures at:noelcarver@bellsouth.net

Good morning and thanks for the inquiry. I have a few swb fleetside beds, but shipping is cost prohibitive, since the bed has to be taken apart and shipped in five different packages, therefore, it costs around $300.00 to ship.

A good, used swb fleetside bed, including the bed sides, wheel tubs, front panel, tailgate & cross sills...minus the wood, wear strips, tail light assemblies, chains & wiring is $800.00, picked up at my shop in Kansas City, KS.

Let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

[LILRED66]

Originally Posted by j.kirn

Do you have the bracket and everything for fuel filter that was on right inside frame rail

Thanks for the inquiry. I am not aware of the factory fuel filter, that was on the right inside frame rail. Do you have a photo or illustration of this? I have neither seen one, nor was I aware they existed. I am interested in seeing the set-up you are referencing.

Thanks for the opportunity and let me know if I can help.

[LILRED66]

Originally Posted by bill2509

Hey Tony , keep me in mind for a GOOD SET of front fenders, Thanks Again Bill

Hey Bill. I come across good, used front fenders, from time-to-time. A good, used, rust-free, dent-free pair is $400.00, plus shipping. A good, used front fender, that has had the fender tail repaired, minus skim-coating & primer is $175.00, plus shipping.

Please let me know your thoughts and I will reply accordingly. Thanks for the opportunity.

[LILRED66]

Originally Posted by highschoolbuilder

okay, i need a 9' step side bed for a 64! what are the price quotes??

Thanks for the reply. I have a pair of swb stepside bed sides and a pair of lwb stepside bed sides. I don't have any good fenders or '9 stepside bed sides, at this time.

Sorry I couldn't help, but please keep me in mind for your future '60-'66 Chevy/GMC truck parts needs and thanks for the opportunity.

[j.kirn]

1960 shop manual page 10-54 fig.80 shows npicture i also have 1 on the 63 k-20 and one on my 1966 c-60 just didnt want to rob it off of 1 of those trucks they were factory

[bill2509]

Thanks Tony, if you find a good used pair with no rust please let me know. Thanks Bill

[dlisabeth]

I am looking for a radiator holddown for my truck to replace the crafty diamond plate one the previous owner made. Here are a couple photos please let me know if you have one.

Thanks,
Derek

[Fun3/4Ton]

Hey Tony, I'm looking for a pair of 3/4 ton hubcaps, for a 1965 2WD pickup. What's the chance you have any? (was thinking because of your own camper special resto you might have two kicking around. Shoot me an e-mail at sgwcontract@hotmail.com. I'm up in Canada but have a postal box in Upper New York State 13669

[LILRED66]

Originally Posted by dlisabeth

I am looking for a radiator holddown for my truck to replace the crafty diamond plate one the previous owner made. Here are a couple photos please let me know if you have one.

Thanks,
Derek

Derek:

Thanks for the inquiry. I sent you a PM regarding this item. Please let me know if I can help.

[LILRED66]

Originally Posted by Fun3/4Ton

Hey Tony, I'm looking for a pair of 3/4 ton hubcaps, for a 1965 2WD pickup. What's the chance you have any? (was thinking because of your own camper special resto you might have two kicking around. Shoot me an e-mail at sgwcontract@hotmail.com. I'm up in Canada but have a postal box in Upper New York State 13669

Thanks for the inquiry. I have a few of them. Measure the inside & outside diameter of the caps you need, to ensure the ones I have will fit your wheels. If you don't have any to measure, I will measure mine and you can determine if they will fit.

[LILRED66]

Originally Posted by j.kirn

1960 shop manual page 10-54 fig.80 shows npicture i also have 1 on the 63 k-20 and one on my 1966 c-60 just didnt want to rob it off of 1 of those trucks they were factory

Maybe it is a big truck deal. I have owned and parted over 50 '60-'66 Chevy/GMC trucks over the years and I have never seen this set-up, but I am learning every day, so I would like to know more about this assembly. Do you have a photo of the set-up or an illustration from the manual, that you can post?

[LILRED66]

Originally Posted by bill2509

Thanks Tony, if you find a good used pair with no rust please let me know. Thanks Bill

Bill:

My inventory changes daily, so I may have some tomorrow...I never know. Needless to say, the good, rust-free, dent-free fenders and doors, don't stay around long, but I will keep you in mind and thanks for the opportunity.

[Fun3/4Ton]

I'm headed to Jamaica for a week but once I'm back I'll send you the measurements along with a picture of the two I already have on the truck to ensure what you have will match. I am excited to hear that you have some and the possibility of having a full set on my truck this year! Thanks!

[Strykerta]

hi i need a few things for my 63 stepside. i need drivers side door glass, rearview mirror assembly, door handle inside, window crank handle, and i need a bench seat. thanks

[1965Cowboy]

need a under the hood heatr box for a 65 c10

[LILRED66]

Originally Posted by Strykerta

hi i need a few things for my 63 stepside. i need drivers side door glass, rearview mirror assembly, door handle inside, window crank handle, and i need a bench seat. thanks

Thanks for the inquiry. I will send you a PM with information on all these items. Enjoy the day.

[LILRED66]

Originally Posted by 1965Cowboy

need a under the hood heatr box for a 65 c10

Thanks for the inquiry. Do you have a Deluxe-Air (3 levers on the dash) heater or a Thrift-Air (single pull knob) heater? Do you need the complete underhood heater box assembly, including the heater core? Fan blower motor? Fan squirrel cage? Please let me know what you need and I will reply accordingly. Thanks for the opportunity.

[LILRED66]

Originally Posted by Fun3/4Ton

I'm headed to Jamaica for a week but once I'm back I'll send you the measurements along with a picture of the two I already have on the truck to ensure what you have will match. I am excited to hear that you have some and the possibility of having a full set on my truck this year! Thanks!

Thanks for the heads-up and congrats on going to Jamaica.

FYI, I also have a few complete sets of six lug and eight lug wheels, with and without hub cap clips, if you are interested.

Let me know when you return and I will try to help you with your factory painted dog dish hub caps for your C20.

[1965Cowboy]

Mt truck came from the factory with NOTHING. had to have been sold in the south!

[62 Longbed]

Tony,
I'm looking for a complete grill assy. for my 62 pickup ... not interested in any chrome or stainless ... just plain old white .. Maybe even just parts since I have a usable grill but no headlight covers or any of the rest , buckets , wiring , etc ... Shipping to Oregon 97080 .... Thanks Jeff

[66coffin]

hey lil red do you have any 1/2 ton lower control arms that will fit my 66 c20, maybe you can ship it together with the other stuff i bought? thanks! zip 91709.

[66coffin]

how much do you want for a set of 6 lug rims? got any pics?

[wrench_65]

looking for a gas gauge for a 1965 c20...

[LILRED66]

Originally Posted by 1965Cowboy

Mt truck came from the factory with NOTHING. had to have been sold in the south!

Are you looking for the complete Thrift-Air (single knob with 2-speed fan) heater/defroster assembly or the Deluxe-Air (three levers/knobs with three speed fan)?