What did you do today not on your truck... - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 04-27-2021, 06:38 PM

Quote:

Originally Posted by Boog

Is there a screen that prevents debri from being picked up by the tire and tossed back onto that carrier in the infants face?

You could put a mud flap on the fender to block everything

burnin oil · 04-27-2021, 06:56 PM

Truck related surprise!
Reinstalled the NV4500 in the 72 today after its rebuild. Came in afterwards and realized I left the phone in the shed so I ran back out to grab it and found a 5 foot black snake guarding the work bench. Good laugh for us that live in the country.

**special-K** · 04-28-2021, 05:36 AM

Quote:

Originally Posted by FleetsidePaul

I went to Catalina Island with my first wife and rented a bicycle built for two. I thought it would be romantic to cruise the island.

All she did was run her mouth and complain that I was either going too fast or too slow.

I felt like jumping off the thing and watching her crash.

So much for romance.

You guys needed one of these

**FleetsidePaul** · 04-29-2021, 02:19 AM

Quote:

Originally Posted by special-K

You guys needed one of these

She would have still complained. She was good at it... She had lot's of practice.

I sold my Jeep today.

Thinning down the herd. I never drove it. Now I'm down to 6 vehicles not counting my motorhome.

You know a buyer is serious when they show up with a trailer and cash. And no B.S.

The guy asked me if I was a rock star or something.

I'm not kidding. He really did.

He's obviously never heard me play.

72c20customcamper · 04-29-2021, 09:09 AM

Got the Dodge differential done yesterday . Not an easy job wrestling a 11.5 AAM on the ground by yourself . The rear I put in looked like new down to the rotors . But I test drove it and had a terrible shimmy when I hit the brakes . Ended up being the rotor but I changed out the axle . Think they bent it taking it out so if the dropped it hard enough to bend it didn't trust the axle either.

1976gmc20 · 04-29-2021, 10:52 AM

Quote:

Originally Posted by 72c20customcamper

Got the Dodge differential done yesterday . Not an easy job wrestling a 11.5 AAM on the ground by yourself . The rear I put in looked like new down to the rotors . But I test drove it and had a terrible shimmy when I hit the brakes . Ended up being the rotor but I changed out the axle . Think they bent it taking it out so if the dropped it hard enough to bend it didn't trust the axle either.

It isn't a full float ???

72c20customcamper · 04-29-2021, 03:15 PM

Quote:

Originally Posted by 1976gmc20

It isn't a full float ???

Full float rear but I just wanted to change it all.

1976gmc20 · 04-29-2021, 04:29 PM

Quote:

Originally Posted by 72c20customcamper

Full float rear but I just wanted to change it all.

Okay, I was just confused how dropping a full float could bend the axle shaft?

Low Elco · 04-30-2021, 07:52 PM

Quote:

Originally Posted by FleetsidePaul

She would have still complained. She was good at it... She had lot's of practice.

I sold my Jeep today.

Thinning down the herd. I never drove it. Now I'm down to 6 vehicles not counting my motorhome.

You know a buyer is serious when they show up with a trailer and cash. And no B.S.

The guy asked me if I was a rock star or something.

I'm not kidding. He really did.

He's obviously never heard me play.

Anybody else just wanna go drink beer with Paul and wait for the shenanagins to start? That's gotta be entertaining.

**Ol Blue K20** · 04-30-2021, 08:09 PM

Quote:

Originally Posted by Low Elco

Anybody else just wanna go drink beer with Paul and wait for the shenanagins to start? That's gotta be entertaining.

I've definitely thought about it! Several times.....

67C10Step · 04-30-2021, 09:17 PM

Wife had the day off so I took the day off as well. We hiked to a waterfall we have never been to before, went to the gun range for a bit and then had lunch. After lunch we played a round of golf. Tired but it was a good day.

**davischevy** · 04-30-2021, 10:13 PM

Quote:

Originally Posted by weq92f

Buddy of mine sold his '65 Chevelle SS convertible at Pate yesterday!

-klb

I thought about going to Pate, and backed out, but then again I still have my 65 Chevelle Convertible.

dieseldawg142 · 05-01-2021, 12:12 AM

worked on my patio stairs.
wife hadn't used her clothesline in awhile, said she felt like she was going to go threw the deck.....
i guess she was right...some serious rot after 20 yrs.
Name: IMG_5205.jpg
Views: 307
Size: 52.1 KB

Name: IMG_5205.jpg
Views: 307
Size: 52.1 KB

Name: IMG_5211.jpg
Views: 306
Size: 69.8 KB

now she can use her clothesline again...
Name: IMG_5213.jpg
Views: 306
Size: 53.3 KB

Name: IMG_5218.jpg
Views: 324
Size: 48.0 KB

57taskforce · 05-01-2021, 12:25 AM

Quote:

Originally Posted by davischevy

I thought about going to Pate, and backed out, but then again I still have my 65 Chevelle Convertible.

Show off

looking great Larry!

**Stocker** · 05-01-2021, 08:58 AM

Quote:

Originally Posted by dieseldawg142

now she can use her clothesline again...
Attachment 2099203

That turned out really nice!!

**FleetsidePaul** · 05-01-2021, 11:01 AM

Quote:

Originally Posted by Low Elco

Anybody else just wanna go drink beer with Paul and wait for the shenanagins to start? That's gotta be entertaining.

The door's always open and the beer is always cold.

The only drawback is that you will have to listen to my dumb jokes.

**Sheepdip** · 05-01-2021, 11:06 AM

Quote:

Originally Posted by davischevy

I thought about going to Pate, and backed out, but then again I still have my 65 Chevelle Convertible.

Dats Purty!

1slo64 · 05-02-2021, 09:26 PM

Gave the wheels on my F150 a good polishing.

**Steeveedee** · 05-02-2021, 11:15 PM

Picked up a knee scooter to ease the pressure off my post-surgical foot. Stitches come out Thursday. $50 off CL, barely used. Now I need to paint some flames on it so it'll go fast.

**FleetsidePaul** · 05-03-2021, 12:05 AM

What did I do today?

I thought about cleaning the surface rust on my truck. Didn't do it.

I thought about working on my Packard. Didn't do that either.

I thought about cleaning my garage..Eh..No.

I thought about making my wife a really nice dinner. Then I ordered a pizza.

Then I thought about taking a nap...That one worked.

**Ol Blue K20** · 05-03-2021, 06:04 AM

Quote:

Originally Posted by 1slo64

Gave the wheels on my F150 a good polishing.

Your wheels came out really nice....

Redneck Rydes · 05-03-2021, 08:29 AM

Quote:

Originally Posted by Ol Blue K20

Your wheels came out really nice....

What did you use on these wheels to clean them up,I have a set on my 1986 Bronco

1slo64 · 05-03-2021, 01:03 PM

Quote:

Originally Posted by Redneck Rydes

What did you use on these wheels to clean them up,I have a set on my 1986 Bronco

Mothers Mag and Aluminum Polish. Was going to use it with their powerball but I wasn't paying $27 for it, so I bought "polishing" cloth and did it by hand.

72c20customcamper · 05-07-2021, 05:13 PM

Found my valve noise on the 496 in my Chevelle #6 exhaust valve lock nut was loose causing the adjuster to back off . Only thing that stopped it from coming off it hit the valve cover. Cam looked perfect so I adjusted all the valves started her and no more clacking. Little strange as the motor was broke in on a dyno ran flawlessly.

67C10Step · 05-07-2021, 05:40 PM

Was troubleshooting the salt cell on my swimming pool as I thought the flow switch was out. Installed a new switch but still not showing flow. In my further troubleshooting there were some sparks involved and now the cell is dead. Oh well, I had checked it and it was at 80%+ life expended so I came in an ordered a new one. Was just hoping to put that off until later in the summer. They only last 4-5 years and this was was on year 5.

04-27-2021, 06:56 PM	#1127
burnin oil Registered User Join Date: Jan 2013 Location: Eastern TN Posts: 1,921	Re: What did you do today not on your truck... Truck related surprise! Reinstalled the NV4500 in the 72 today after its rebuild. Came in afterwards and realized I left the phone in the shed so I ran back out to grab it and found a 5 foot black snake guarding the work bench. Good laugh for us that live in the country.

04-29-2021, 09:09 AM	#1130
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,624	Re: What did you do today not on your truck... Got the Dodge differential done yesterday . Not an easy job wrestling a 11.5 AAM on the ground by yourself . The rear I put in looked like new down to the rotors . But I test drove it and had a terrible shimmy when I hit the brakes . Ended up being the rotor but I changed out the axle . Think they bent it taking it out so if the dropped it hard enough to bend it didn't trust the axle either. __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

04-30-2021, 09:17 PM	#1136
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do today not on your truck... Wife had the day off so I took the day off as well. We hiked to a waterfall we have never been to before, went to the gun range for a bit and then had lunch. After lunch we played a round of golf. Tired but it was a good day. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

05-01-2021, 12:12 AM	#1138
dieseldawg142 Registered User Join Date: Jul 2011 Location: back 40, bc Posts: 3,861	Re: What did you do today not on your truck... worked on my patio stairs. wife hadn't used her clothesline in awhile, said she felt like she was going to go threw the deck..... i guess she was right...some serious rot after 20 yrs. now she can use her clothesline again...

05-02-2021, 09:26 PM	#1143
1slo64 Registered User Join Date: Feb 2019 Location: Madison, AL Posts: 322	Re: What did you do today not on your truck... Gave the wheels on my F150 a good polishing. __________________ 1964 GMC Fleetside SWB 1966 Mustang Coupe 2013 Tahoe LT

05-02-2021, 11:15 PM	#1144
Steeveedee Who Changed This? Join Date: Jan 2013 Location: Simi Valley, CA Posts: 10,578	Re: What did you do today not on your truck... Picked up a knee scooter to ease the pressure off my post-surgical foot. Stitches come out Thursday. $50 off CL, barely used. Now I need to paint some flames on it so it'll go fast. __________________ ~Steven '70 Chevy 3/4T Longhorn CST 402/400/3.56 Custom Camper Simi Valley, CA

05-03-2021, 12:05 AM	#1145
FleetsidePaul R.I.P. E.S.L.L. Join Date: Aug 2005 Location: Kernville CA./ Lake Isabella CA. Posts: 11,419	Re: What did you do today not on your truck... What did I do today? I thought about cleaning the surface rust on my truck. Didn't do it. I thought about working on my Packard. Didn't do that either. I thought about cleaning my garage..Eh..No. I thought about making my wife a really nice dinner. Then I ordered a pizza. Then I thought about taking a nap...That one worked. __________________ 1971 Custom C/20 1970 CST 20 1970 C/30 Flatbed 1983 C/30 Dually 2015 Corvette Z51 2021 Corvette Z51 1991 Cadillac Hearse 1982 Cadillac Eldorado Biarritz 2000 Porsche Boxster S 2020 Jeep Gladiator 1973 VW Thing 1973 Plymouth Satellite wagon 1963 Baja Bug 1959 Bug Dune Buggy 1970 Baja Bug 1987 Jaguar XJ 350. R.I.P. El Jay R.I.P Jessie. R.I.P Grumpy. Every day is a gift from God.

05-07-2021, 05:13 PM	#1149
72c20customcamper Registered User Join Date: Jul 2018 Location: Catskill Mountains,NY Posts: 8,624	Re: What did you do today not on your truck... Found my valve noise on the 496 in my Chevelle #6 exhaust valve lock nut was loose causing the adjuster to back off . Only thing that stopped it from coming off it hit the valve cover. Cam looked perfect so I adjusted all the valves started her and no more clacking. Little strange as the motor was broke in on a dyno ran flawlessly. Attached Images __________________ Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary.

05-07-2021, 05:40 PM	#1150
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: What did you do today not on your truck... Was troubleshooting the salt cell on my swimming pool as I thought the flow switch was out. Installed a new switch but still not showing flow. In my further troubleshooting there were some sparks involved and now the cell is dead. Oh well, I had checked it and it was at 80%+ life expended so I came in an ordered a new one. Was just hoping to put that off until later in the summer. They only last 4-5 years and this was was on year 5. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.