What Did You Do With Your Truck Today ?

[mygirlz55]

set the engine back into the truck after swapping the camaro front end into it. Still need to trim the fender inners to fit around frame and a whole list of other things. doesnt seem to sit as low in the front as others I've seen with the camaro front clip. maybe it will settle down once driven.

[tttuba]

put the original wheels back on my truck. not the final colors just wanted to see what original style wheels look like on the truck. Thinking i will keep them there.

[sickred72]

WOW! looks alot better than the chrome mods, just my opinion

[tttuba]

Originally Posted by sickred72

WOW! looks alot better than the chrome mods, just my opinion

That's what I thought too

[mknittle]

Originally Posted by tttuba

put the original wheels back on my truck. not the final colors just wanted to see what original style wheels look like on the truck. Thinking i will keep them there.

Those would look good with the stock style hubcaps

[tttuba]

Originally Posted by mknittle

Those would look good with the stock style hubcaps

I have a set of like new Chevy ones and know where to get new GMC ones. Just a matter of money just like anything else here. I am going to get the original caps though

[pvienneau]

Got 95% of the scale and rust off the frame. 49 4 speed is completely disasembled we are ready to begin painting the frame. Any suggestions and or how tos welcomed. This board has been awesome during my project.

[crossfire84]

Made shock mounts and welded them on, and had the tool and die end of shop turn me up some stainless blinker and tilt arms.

[la hi]

Removed the windshield, wire brushed the channels, primered the windshield area, primered the dash and front top inside metal. Now I will not have to sand with a new windshield in place. Will have it installed tomorow.

[arturo7]

Started cleaning the disassembled front end pieces in preparation for a de-rusting bath. Holy kerschnockers, this stuff is filthy! Comet and a scrub brush ain't gonna cut it.

Is there anything, like an engine degunker, that I can spray and on, let sit, then pressure wash off?



EDIT: Just did some googling. Looks like I need Wax & Grease Remover, right?

[mknittle]

Originally Posted by arturo7

Started cleaning the disassembled front end pieces in preparation for a de-rusting bath. Holy kerschnockers, this stuff is filthy! Comet and a scrub brush ain't gonna cut it.

Is there anything, like an engine degunker, that I can spray and on, let sit, then pressure wash off?



EDIT: Just did some googling. Looks like I need Wax & Grease Remover, right?

thats for paint prep go to walmart and get some ourple power it works as good as the chevron industral detergentwe use.

[mknittle]

sorry, purple power. it's about $20 a gallon. a paint scrapper{ I get the ones with a point on one side and a radius on the other} works good to get the thick stuff off. get the thick stuff off first then degreaser.

[OrrieG]

Simple green cut 50 percent, wire brush, scrapers and elbow grease. Usually need to power wash a couple times. It's a lot nicer to the critters and environment too.

[crossfire84]

started to fab up my exhaust to day.

[mknittle]

I started to work out my clutch linkage.

[oldcouple]

Mocking up my door panels so everything fits.

[mknittle]

Originally Posted by oldcouple

Mocking up my door panels so everything fits.

looking good

[mknittle]

You wouldn't beleive me if I told you.

[mknittle]

Ok i made fake bead rolls for my toeboard patch. I don't have a good way to roll the flat bottom beads so i made some out of 1/8" flat stock. they will be plug welded from the inside and i will use seam sealer to blend and seal them.

[oldcouple]

Details details.

[mknittle]

Originally Posted by oldcouple

Details details.

Yeah, I know what you mean, i drive my wife crazy constantly messing with stuff she had to know what she was getting into when we met I had a house full of jeep parts

[arturo7]

More homework.

The truck is about an hour away at my buddy's shop. It will be there until the heavy lifting in done. At present, I can only work on it on Saturdays. However, I can obsess over it whenever I choose.

The upside of this obsessing is that I'm spending quite a bit of time reading, pondering and planning. The scope of the project has expanded significantly. But oddly enough, the budget has not.

[Johnny49]

Final refinishing of the bed wood has begun! Left pic is where we started. Right pic is the underside. Bottom pic is the underside (which will now be the top side) after about an hour of pressure washing and a good belt sanding. The wood was then bleached, repairs made and now the final finishing has begun. Several coats and lots of sanding to be done, but we're getting there! I will post a before/during/after montage when it's all done. It won't be perfect, but it WILL look a hell of a lot better and have a little character. Not trying to have a show truck, just one that reflects a labor of love...

[crossfire84]

nice.

[yossarian19]

Got her out from under a half-broken camper, out of the driveway after moving one Jeep and jump starting another, across a small ditch & out on the street to be picked up next Saturday.
Here she is as I last saw her: [IMG][/IMG]