Project Grande Slam: Coley's Hot Rod Shop - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**nlped** · 11-27-2012, 06:16 PM

Personally, I'd open up the hole a little bit, you haven't painted it or powder coated it yet, right? Bigger bolt=More strength in my opinion, and you sure don't want the shock eye having play in it, it'll rattle I'm sure.

And I'm very curious as to your "fix" for the parking brake cables. I was just going to move that bracket back closer to the rearend too, but my problem is the dang cable that came with my kit has a spring on the actual cable (looks to me like a drum brake parking cable) that when installed on my caliper it is completely compressed and theres no movement left in the cable to actually articulate the parking brake mechanism on the caliper... does that make sense?

**lolife99** · 11-27-2012, 08:52 PM

Does Nate use a shock specific stud on his upper and lower bars?

CC69Rat · 11-28-2012, 08:31 PM

Not sure really (?) I just want to be sure before I drill it. I think the ones I have are slightly larger than the ones in the picture above. They look beefier ..

We'll get it figured out. I found a guy on the forum (THANKS Gringo!) with the lower shock bar and brackets possibly for sale. We'll see how it works out and I might save a few bucks. I'm in no hurry, the truck is probably down for a couple weeks anyway.

Dad and I spent the majority of the day today stripping the front stuff out. We have everything apart now, just cleaning and detailing. Maybe this weekend (supposed to be in the 70's here on Sat / Sun

We can paint and start bolting things back up. I'm just doing stock arms for now. If I keep the truck, and / or LS3 in the future I will do PB arms upper and lower, front and rear.

Here are a few pictures from today. The door is only about 1/2 latched. Dad is cleaning up the rockers and we're going to re-spray them. The weatherstripping is pulled back just a little and we just don't want the door to sit fully closed and mess up the rubbers. The rear is all but finished. Shocks, lower bar, brackets, trackbar and we can put the bed back on. .. just waiting on my money tree to bloom again.

Anyway, here's the front.

CC69Rat · 11-28-2012, 08:34 PM

Mais Um..

CC69Rat · 11-28-2012, 08:36 PM

Oh, by the way .. the wheels/tires underneath are only extra caution. (My old 6 luggers) The truck is not sitting on the tires, there are stands under it and a jack under the cross member.

**nlped** · 11-28-2012, 09:00 PM

Lookin good. I did the same stuff up front too. I went ahead and replaced the brake lines at the same time since I had to replace the m/c & p/v too. Best time to do it, considering the 40+ year old lines.

Tell me about the brake cables.

Posted via Mobile Device

CC69Rat · 11-28-2012, 09:09 PM

Dad is taking pictures now.. will post in a few.
Posted via Mobile Device

**nlped** · 11-28-2012, 09:13 PM

If y'all are gonna be working on it Saturday, maybe Kim & I could swing by and check it out?
Posted via Mobile Device

BB72CHEVKT · 11-28-2012, 09:28 PM

When you think about it you have to be crazy not to run all new line with all the money you have tied up. I used stock brake parts and still had new hard lines run.

CC69Rat · 11-28-2012, 09:29 PM

Yeah man! You both are welcome anytime. Ill be there all day. Come on up.
Posted via Mobile Device

CC69Rat · 11-28-2012, 09:56 PM

Ed, here's a picture of what we did. Where you see the red arrows, those are the original mounting holes. (where the rivets used to be) From the back side of the trailing arm, I just knocked those out and got the brackets off.

Originally the bracket is facing the other direction. To make the angle of the bracket vs. the line itself more suited for the fact the trailing arms have been raised a little, the rear McGaughy's lines are a bit shorter, etc. We just moved the bracket back 6.75" (center of the original hole to the center of the new hole) and flipped it around the other direction.

Also, .. the intermediate brake cable was replaced. Dad picked up some steel cable and ends which worked great, but it has too much strech in it. As soon as we pulled the brakes a couple good times the cable just keeps streching out. We're going to re-do that intermediate cable with something different.

It needs touched up. You can still see where the original bracket was and the rusty powder stuff is just from drilling through the trailing arm.

I know, the sway bar needs to move back about an inch ..

I'll fix it.

**nlped** · 11-28-2012, 10:29 PM

That's kinda what I intend on doing too. But I need to see the other end at the caliper. That's where my issue is right now.

I think I'll just see it in person on Saturday. I bought a new Harley and have convinced Kim that chatanooga would be a good day road trip

Posted via Mobile Device

shawno72 · 11-28-2012, 10:39 PM

Looking really good Chad. Can't wait to see this thing on the ground.
Posted via Mobile Device

**Graham57a** · 11-29-2012, 12:43 AM

Very nice, what are the plans for the wheels? Find two more billet specialties just like the rears?

CC69Rat · 11-29-2012, 07:57 AM

I have another wheel to go on it. The ones on it in the pictures are the ones I have for my stepside. I bought the two Heritage wheels that Stiney had for sale a while back. ( in a couple of the earlier pictures)
Posted via Mobile Device

**67cheby** · 11-29-2012, 10:35 AM

looking great man, nice progress !

**Graham57a** · 11-29-2012, 12:18 PM

So you plan on running the wheels off the stepside??

CC69Rat · 11-29-2012, 12:42 PM

Billet Specialties Heritage.

I'll have to put my front ones (Dagger - G ) on for a couple weeks until my front Heritage arrive. I only have two right now.

(Big brakes up front .. )

**superflysteiny** · 11-29-2012, 06:19 PM

Nice wheels
Posted via Mobile Device

CC69Rat · 11-29-2012, 08:01 PM

Man, I cant wait to see them mounted.

Its going to make the whole truck.
Posted via Mobile Device

72BlckButy · 11-30-2012, 02:40 PM

Looking good, nice progress!

CC69Rat · 11-30-2012, 03:09 PM

Hey -- thanks Nate

Ed, you gonna ride up?

Can anyone tell me if these upper arms will work as a 63-70 stock replacement? My concern is I bought the spindles for 63-70 style balljoints. What I don't want. is the balljoint in these arms to be different than what I need for my spindles. I just want t odouble check that everything would match up.

http://www.summitracing.com/parts/cl...del/c10-pickup

Just curious really right now. .. I'm considering tube arms for my GMC. Any opinions on CPP control arms?

thanks.

Rusbuilt · 11-30-2012, 03:14 PM

You would just need to be sure you have 63-70 ball joints installed in those arms.

**lolife99** · 11-30-2012, 03:15 PM

You should be able to get the in whatever balljoint you need.
Posted via Mobile Device

original-71 · 11-30-2012, 03:58 PM

Quote:

Originally Posted by CC69Rat

Man, I cant wait to see them mounted.

Its going to make the whole truck.
Posted via Mobile Device

put them on anyways without the tires take a picture for us then put them back in the box

looking by the way.

11-27-2012, 06:16 PM	#1126
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Project Grande Slam: Coley's Hot Rod Shop Personally, I'd open up the hole a little bit, you haven't painted it or powder coated it yet, right? Bigger bolt=More strength in my opinion, and you sure don't want the shock eye having play in it, it'll rattle I'm sure. And I'm very curious as to your "fix" for the parking brake cables. I was just going to move that bracket back closer to the rearend too, but my problem is the dang cable that came with my kit has a spring on the actual cable (looks to me like a drum brake parking cable) that when installed on my caliper it is completely compressed and theres no movement left in the cable to actually articulate the parking brake mechanism on the caliper... does that make sense? __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-27-2012, 08:52 PM	#1127
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: Project Grande Slam: Coley's Hot Rod Shop Does Nate use a shock specific stud on his upper and lower bars? Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-28-2012, 08:31 PM	#1128
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Not sure really (?) I just want to be sure before I drill it. I think the ones I have are slightly larger than the ones in the picture above. They look beefier .. We'll get it figured out. I found a guy on the forum (THANKS Gringo!) with the lower shock bar and brackets possibly for sale. We'll see how it works out and I might save a few bucks. I'm in no hurry, the truck is probably down for a couple weeks anyway. Dad and I spent the majority of the day today stripping the front stuff out. We have everything apart now, just cleaning and detailing. Maybe this weekend (supposed to be in the 70's here on Sat / Sun We can paint and start bolting things back up. I'm just doing stock arms for now. If I keep the truck, and / or LS3 in the future I will do PB arms upper and lower, front and rear. Here are a few pictures from today. The door is only about 1/2 latched. Dad is cleaning up the rockers and we're going to re-spray them. The weatherstripping is pulled back just a little and we just don't want the door to sit fully closed and mess up the rubbers. The rear is all but finished. Shocks, lower bar, brackets, trackbar and we can put the bed back on. .. just waiting on my money tree to bloom again. Anyway, here's the front. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-28-2012, 08:34 PM	#1129
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Mais Um.. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-28-2012, 08:36 PM	#1130
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Oh, by the way .. the wheels/tires underneath are only extra caution. (My old 6 luggers) The truck is not sitting on the tires, there are stands under it and a jack under the cross member. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-28-2012, 09:00 PM	#1131
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Project Grande Slam: Coley's Hot Rod Shop Lookin good. I did the same stuff up front too. I went ahead and replaced the brake lines at the same time since I had to replace the m/c & p/v too. Best time to do it, considering the 40+ year old lines. Tell me about the brake cables. Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-28-2012, 09:09 PM	#1132
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Dad is taking pictures now.. will post in a few. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-28-2012, 09:13 PM	#1133
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Project Grande Slam: Coley's Hot Rod Shop If y'all are gonna be working on it Saturday, maybe Kim & I could swing by and check it out? Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-28-2012, 09:28 PM	#1134
BB72CHEVKT Junior Member Join Date: Mar 2007 Location: Hideaway, TX Posts: 4,950	Re: Project Grande Slam: Coley's Hot Rod Shop When you think about it you have to be crazy not to run all new line with all the money you have tied up. I used stock brake parts and still had new hard lines run. __________________ 71 Suburban 350/700R4 Project Trixie 72 CHEVY,Highlander,SWB,396,T400 Last edited by BB72CHEVKT; 11-28-2012 at 09:29 PM. Reason: grammar

11-28-2012, 09:29 PM	#1135
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Yeah man! You both are welcome anytime. Ill be there all day. Come on up. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-28-2012, 09:56 PM	#1136
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Ed, here's a picture of what we did. Where you see the red arrows, those are the original mounting holes. (where the rivets used to be) From the back side of the trailing arm, I just knocked those out and got the brackets off. Originally the bracket is facing the other direction. To make the angle of the bracket vs. the line itself more suited for the fact the trailing arms have been raised a little, the rear McGaughy's lines are a bit shorter, etc. We just moved the bracket back 6.75" (center of the original hole to the center of the new hole) and flipped it around the other direction. Also, .. the intermediate brake cable was replaced. Dad picked up some steel cable and ends which worked great, but it has too much strech in it. As soon as we pulled the brakes a couple good times the cable just keeps streching out. We're going to re-do that intermediate cable with something different. It needs touched up. You can still see where the original bracket was and the rusty powder stuff is just from drilling through the trailing arm. I know, the sway bar needs to move back about an inch .. I'll fix it. Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride) Last edited by CC69Rat; 11-28-2012 at 10:02 PM.

11-28-2012, 10:29 PM	#1137
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: Project Grande Slam: Coley's Hot Rod Shop That's kinda what I intend on doing too. But I need to see the other end at the caliper. That's where my issue is right now. I think I'll just see it in person on Saturday. I bought a new Harley and have convinced Kim that chatanooga would be a good day road trip Posted via Mobile Device __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

11-28-2012, 10:39 PM	#1138
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project Grande Slam: Coley's Hot Rod Shop Looking really good Chad. Can't wait to see this thing on the ground. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

11-29-2012, 12:43 AM	#1139
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,855	Re: Project Grande Slam: Coley's Hot Rod Shop Very nice, what are the plans for the wheels? Find two more billet specialties just like the rears? __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

11-29-2012, 07:57 AM	#1140
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop I have another wheel to go on it. The ones on it in the pictures are the ones I have for my stepside. I bought the two Heritage wheels that Stiney had for sale a while back. ( in a couple of the earlier pictures) Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)



Register or Log In To remove these advertisements.

11-29-2012, 10:35 AM	#1141
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project Grande Slam: Coley's Hot Rod Shop looking great man, nice progress ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-29-2012, 12:18 PM	#1142
Graham57a Senior Member Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,855	Re: Project Grande Slam: Coley's Hot Rod Shop So you plan on running the wheels off the stepside?? __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788

11-29-2012, 12:42 PM	#1143
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Billet Specialties Heritage. I'll have to put my front ones (Dagger - G ) on for a couple weeks until my front Heritage arrive. I only have two right now. (Big brakes up front .. ) Attached Images __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-29-2012, 06:19 PM	#1144
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Project Grande Slam: Coley's Hot Rod Shop Nice wheels Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-29-2012, 08:01 PM	#1145
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Man, I cant wait to see them mounted. Its going to make the whole truck. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-30-2012, 02:40 PM	#1146
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project Grande Slam: Coley's Hot Rod Shop Looking good, nice progress! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-30-2012, 03:09 PM	#1147
CC69Rat Registered User Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,207	Re: Project Grande Slam: Coley's Hot Rod Shop Hey -- thanks Nate Ed, you gonna ride up? Can anyone tell me if these upper arms will work as a 63-70 stock replacement? My concern is I bought the spindles for 63-70 style balljoints. What I don't want. is the balljoint in these arms to be different than what I need for my spindles. I just want t odouble check that everything would match up. http://www.summitracing.com/parts/cl...del/c10-pickup Just curious really right now. .. I'm considering tube arms for my GMC. Any opinions on CPP control arms? thanks. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-30-2012, 03:14 PM	#1148
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project Grande Slam: Coley's Hot Rod Shop You would just need to be sure you have 63-70 ball joints installed in those arms. __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-30-2012, 03:15 PM	#1149
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: Project Grande Slam: Coley's Hot Rod Shop You should be able to get the in whatever balljoint you need. Posted via Mobile Device __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

Register or Log In To remove these advertisements.