What did you do to your truck today? Chapter II - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**michael bustamante** · 09-14-2014, 12:02 AM

Whelp.... i tore apart my heater core box. Cleaned a big ol mouses nest from ALL the pockets and crevices. ( a five gallon wet or dry vac full) bleached the heck out of it. ( the last thing i need is hantavirus) recoditioned the motor and replaced the squirrel cage. Cleaned the core, lightly sanded and applied 4 coats of rattlecan clear on the box, resealed and reinstalled. It came out good
Dangit. It posted sideways again

ujsf01 · 09-14-2014, 09:43 PM

Got my new wiring harness finished up, installed carpet after laying sound deadener, new heater core installed, new dash pad, new Dakota Digital VHX system installed, getting ready to install all cab rubber, get all the glass back in and be ready for Crusin' the Coast in about 3 weeks!

Tried to post photos, but got some weird error message about a security token....whatever that means.

9teen69 · 09-14-2014, 10:30 PM

Installed rear sway bar from CPP. Can wait to see...feel how it handles.

Baker819 · 09-15-2014, 01:48 AM

Cut the front of my bed down 12"

**Elliot949** · 09-15-2014, 07:00 AM

Quote:

Originally Posted by Baker819

Cut the front of my bed down 12"

Nice cuts... that will give you some good strength...

texjake · 09-16-2014, 01:28 AM

I painted the inside of my tailgate with Rustoleum spray on bedliner just to see how it does & to get an idea how the rest of the inside of the bed walls & the wheel wheels are going to look once I finish sanding & prepping it. I was able to get two coats laid down before dark thirty and it turned out better than I expected. I know it's not Herculiner, Line-X or Rhino Liner but it will work fine and it's a heck of a lot cheaper too. I want to get the inside walls painted before putting down the new wood & rails.

BugzC10 · 09-16-2014, 07:03 AM

Quote:

Originally Posted by texjake

I painted the inside of my tailgate with Rustoleum spray on bedliner just to see how it does & to get an idea how the rest of the inside of the bed walls & the wheel wheels are going to look once I finish sanding & prepping it. I was able to get two coats laid down before dark thirty and it turned out better than I expected. I know it's not Herculiner, Line-X or Rhino Liner but it will work fine and it's a heck of a lot cheaper too. I want to get the inside walls painted before putting down the new wood & rails.

Where did you buy it? Home Depot?

texjake · 09-16-2014, 08:54 AM

Quote:

Originally Posted by BugzC10

Where did you buy it? Home Depot?

I got mine at Lowe's http://www.lowes.com/pd_303289-90-24...ductId=3728969 I have seen it at Home Depot, Wal-Mart, Autozone & Tractor Supply too. And you can get it at Amazon.com as well. The "spray on" bed liner that Rust-Oleum® sells is actually called "truck bed coating". Rust-Oleum® does sell a "bed liner kit", it's a two component epoxy/rubber based roll on product & not a spray. I'm not sure how good it is, the spay-on was just more convenient for me.

OregonNed · 09-17-2014, 04:14 PM

Installed a set of show panels, a matching radiator cover and Fesler Built hood stops. Also added silver powdercoated hood latch and radiator brackets (upper)

Before:

During:

After:

CST10 · 09-17-2014, 08:29 PM

Super looking engine bay you got there.

**michael bustamante** · 09-17-2014, 11:40 PM

Yeah whered you get those filler covers in all you pics? Watch those wrenches on your battery!

PowerdbyChevy79 · 09-18-2014, 03:12 AM

Quote:

Originally Posted by OregonNed

Installed a set of show panels, a matching radiator cover and Fesler Built hood stops. Also added silver powdercoated hood latch and radiator brackets (upper)

Before:

During:

After:

Very nice.....

**Elliot949** · 09-18-2014, 07:19 AM

That looks great...

**DaHos** · 09-19-2014, 11:02 AM

Finished this up to go with post #1053.

Helping a local clean up his 68 50th.

69gmc-IN · 09-19-2014, 01:53 PM

New member here,
Not really what I did today but over the last couple days. 2 days ago Started working on my 69 GMC Custom 1500, pulled out the seat and all of the floormats and padding(which is completely shot). Also started to assess the rust floor damage. Last night I pulled the fuel tank sending unit and pickup tube. the float is completely missing, but I did ohm out the sending unit and it does look like it's working. My only other issue is the prefilter on the end of the pickup tube is pretty rotted and split. was also full of good ol black gunk. along with probably 1/4" of sludge in the tank. weekend project is to pull the tank drain it and get ready to run a KBS coatings tank sealer kit through it. I'm pretty new to a lot of this but have been told that I'm pretty mechanically inclined so I've been reading a lot.

bs46488 · 09-19-2014, 02:45 PM

Dropped in a big block.

Now I just need to do...everything else.

CST10 · 09-19-2014, 05:27 PM

I set/adjusted the lash on my solid roller cam lifters and changed the plugs out.

UNEASYRIDER · 09-20-2014, 09:57 PM

Shot Hipoliner.

OregonNed · 09-22-2014, 01:21 PM

Quote:

Originally Posted by DaHos

Finished this up to go with post #1053.

Helping a local clean up his 68 50th.

Looks great!

magwakeenercew2jh · 09-22-2014, 02:11 PM

Used the bed to go get a bed.

magwakeenercew2jh · 09-22-2014, 02:58 PM

Today, I messed with the glove box door.
Silly. But I like it.

It stays.

BugzC10 · 09-22-2014, 04:29 PM

Rebuilt air vents before installing Vintage Air system.

texasld · 09-22-2014, 05:18 PM

Got the engine, transmission, and headers installed this weekend.

Name: Clean Transmission.jpg
Views: 918
Size: 53.1 KB

Name: Engine Driver Side.jpg
Views: 1586
Size: 61.2 KB

Name: Engine Pass Side.jpg
Views: 997
Size: 64.1 KB

Name: Transmission Mounted.jpg
Views: 899
Size: 72.1 KB

Didn't even have problems with the AC Compressor Clearing.

Name: AC Compressor.jpg
Views: 894
Size: 77.8 KB

Saclandman · 09-22-2014, 05:45 PM

Spent yesterday pulling the water pump twice to try to fix a coolant leak, then ran some sealer through it just to make sure. Today put new shocks on all four corners and installed new wipers. Maybe next weekend I'll try working on my 67 instead of my Tahoe.

Andy4639 · 09-22-2014, 07:36 PM

Quote:

Originally Posted by texasld

Got the engine, transmission, and headers installed this weekend.

Attachment 1304575
Attachment 1304576
Attachment 1304577
Attachment 1304578

Didn't even have problems with the AC Compressor Clearing.

Attachment 1304574

Have you posted this on the LS swap thread yet? Nice work would like to here about the swap.

09-14-2014, 12:02 AM	#1126
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: What did you do to your truck today? Chapter II Whelp.... i tore apart my heater core box. Cleaned a big ol mouses nest from ALL the pockets and crevices. ( a five gallon wet or dry vac full) bleached the heck out of it. ( the last thing i need is hantavirus) recoditioned the motor and replaced the squirrel cage. Cleaned the core, lightly sanded and applied 4 coats of rattlecan clear on the box, resealed and reinstalled. It came out good Dangit. It posted sideways again Attached Images __________________ 1967custom

09-14-2014, 09:43 PM	#1127
ujsf01 Registered User Join Date: May 2011 Location: Cullman, Alabama Posts: 125	Re: What did you do to your truck today? Chapter II Got my new wiring harness finished up, installed carpet after laying sound deadener, new heater core installed, new dash pad, new Dakota Digital VHX system installed, getting ready to install all cab rubber, get all the glass back in and be ready for Crusin' the Coast in about 3 weeks! Tried to post photos, but got some weird error message about a security token....whatever that means. __________________ Steve McMillen ASE and GM certified Master Technician 25 years+ experience No, I do not know it all, that's why I attend tons of training.

09-14-2014, 10:30 PM	#1128
9teen69 Registered User Join Date: Sep 2002 Location: Austin, Texas Posts: 1,048	Re: What did you do to your truck today? Chapter II Installed rear sway bar from CPP. Can wait to see...feel how it handles. Attached Images __________________ 72 Cheyenne SWB C10 (daily driver) (Super fake cause I just love the glovebox emblem) 70 Camaro RS (frame-off in pieces) 70 Camaro RS (daily driver backup) 69 Custom LWB C10 (son now drives)

09-15-2014, 01:48 AM	#1129
Baker819 Registered User Join Date: Oct 2012 Location: WA Posts: 119	Re: What did you do to your truck today? Chapter II Cut the front of my bed down 12"

09-16-2014, 01:28 AM	#1131
texjake Registered User Join Date: Nov 2013 Location: Lubbock, TX Posts: 283	Re: What did you do to your truck today? Chapter II I painted the inside of my tailgate with Rustoleum spray on bedliner just to see how it does & to get an idea how the rest of the inside of the bed walls & the wheel wheels are going to look once I finish sanding & prepping it. I was able to get two coats laid down before dark thirty and it turned out better than I expected. I know it's not Herculiner, Line-X or Rhino Liner but it will work fine and it's a heck of a lot cheaper too. I want to get the inside walls painted before putting down the new wood & rails. Attached Images __________________ "Now all I need is a shop to go with my shop vac!"

09-17-2014, 04:14 PM	#1134
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today? Chapter II Installed a set of show panels, a matching radiator cover and Fesler Built hood stops. Also added silver powdercoated hood latch and radiator brackets (upper) Before: During: After: __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

09-17-2014, 08:29 PM	#1135
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: What did you do to your truck today? Chapter II Super looking engine bay you got there. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

09-17-2014, 11:40 PM	#1136
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,858	Re: What did you do to your truck today? Chapter II Yeah whered you get those filler covers in all you pics? Watch those wrenches on your battery! __________________ 1967custom

09-18-2014, 07:19 AM	#1138
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: What did you do to your truck today? Chapter II That looks great... __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

09-19-2014, 11:02 AM	#1139
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,858	Re: What did you do to your truck today? Chapter II Finished this up to go with post #1053. Helping a local clean up his 68 50th. Attached Images __________________ 1967 C10 SWB Owner - Rustbelt Restorations

09-19-2014, 01:53 PM	#1140
69gmc-IN Registered User Join Date: Sep 2014 Location: Indiana Posts: 16	Re: What did you do to your truck today? Chapter II New member here, Not really what I did today but over the last couple days. 2 days ago Started working on my 69 GMC Custom 1500, pulled out the seat and all of the floormats and padding(which is completely shot). Also started to assess the rust floor damage. Last night I pulled the fuel tank sending unit and pickup tube. the float is completely missing, but I did ohm out the sending unit and it does look like it's working. My only other issue is the prefilter on the end of the pickup tube is pretty rotted and split. was also full of good ol black gunk. along with probably 1/4" of sludge in the tank. weekend project is to pull the tank drain it and get ready to run a KBS coatings tank sealer kit through it. I'm pretty new to a lot of this but have been told that I'm pretty mechanically inclined so I've been reading a lot.

09-19-2014, 02:45 PM	#1141
bs46488 Registered User Join Date: May 2014 Location: San Diego, CA Posts: 547	Re: What did you do to your truck today? Chapter II Dropped in a big block. Now I just need to do...everything else.

09-19-2014, 05:27 PM	#1142
CST10 Registered User Join Date: Sep 2013 Location: Gonzales, La Posts: 1,441	Re: What did you do to your truck today? Chapter II I set/adjusted the lash on my solid roller cam lifters and changed the plugs out. __________________ MyToys: Goldilocks the "Ol School Survivor" 1968 C10, SWB Stepside, 08/15 TOTM, 250 CI 6 cylinder, 3 on the tree, 3.73 rear, 3/5 static drop, 23,500 original miles. Samson the 1970 CST10, LWB, 462Ci, Turbo 350 tranny, 3.08 rear gear, PB, PS, A/C, AM/FM, 2/4 Drop. Brutus the 1998 Camaro Z28, 33,500 original miles, LS1, 519 RWHP/497 RWTQ. Member of the Louisiana Classic Truck Club, LCTC Member of the Louisiana C10 Club Member of the Baton Rouge Drifters Car Club

09-20-2014, 09:57 PM	#1143
UNEASYRIDER Registered User Join Date: Apr 2009 Location: PHOENIX,ARIZONA Posts: 91	Re: What did you do to your truck today? Chapter II Shot Hipoliner. Attached Images __________________ DON'T BUILD IT IF YOUR NOT GONA DRIVE IT!!

09-22-2014, 02:11 PM	#1145
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today? Chapter II Used the bed to go get a bed. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.



Register or Log In To remove these advertisements.

09-22-2014, 02:58 PM	#1146
magwakeenercew2jh RAT1968 '68 Cab/'71 Parts Join Date: Feb 2002 Location: Coarsegold, CA Posts: 2,375	Re: What did you do to your truck today? Chapter II Today, I messed with the glove box door. Silly. But I like it. It stays. Attached Images __________________ M17 Coarsegold, CA RAT's shiny now. But always a rat.

09-22-2014, 04:29 PM	#1147
BugzC10 Registered User Join Date: Oct 2012 Location: Rose Hill Kansas Posts: 1,351	Re: What did you do to your truck today? Chapter II Rebuilt air vents before installing Vintage Air system. __________________ 1970 C10 Short Stepper with 71/72 front clip.

09-22-2014, 05:18 PM	#1148
texasld Registered User Join Date: Dec 2013 Location: Wilmot, NH Posts: 443	Re: What did you do to your truck today? Chapter II Got the engine, transmission, and headers installed this weekend. Didn't even have problems with the AC Compressor Clearing. __________________ 1969 C10 SWB 5.3L LS, 4l60e, 2/4 drop (In Progress) 2015 GMC 2500 Duramax (Daily Driver) 1999 Jeep TJ 2010 Harley Street Glide Check Out My Build!: http://67-72chevytrucks.com/vboard/s...d.php?t=617981

09-22-2014, 05:45 PM	#1149
Saclandman Registered User Join Date: May 2013 Location: Sacramento, CA Posts: 487	Re: What did you do to your truck today? Chapter II Spent yesterday pulling the water pump twice to try to fix a coolant leak, then ran some sealer through it just to make sure. Today put new shocks on all four corners and installed new wipers. Maybe next weekend I'll try working on my 67 instead of my Tahoe. __________________ Rich J. 1967 Chevy C20 Longbed Stepside w/283 and 4spdSOLD 2002 Chevy Tahoe 4X4 5.3L SOLD 2015 Chevy Silverado Crew 4X4 5.3L

Register or Log In To remove these advertisements.