How about some pics of bagged C-10's - Page 46 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

OG2wdblaze · 09-15-2010, 09:52 AM

Quote:

Originally Posted by slamit

Nothing near as cool, but nice to see another step side. Dare to be different.

perfect!

Envious Styles · 09-19-2010, 11:47 AM

Quote:

Originally Posted by rustSpot

68 were building here at the shop. 22x10 in the front with 22x11 in the rear. Front and rear Suicidedoors kit. creatingrollingart.com

Do you have pictures of the rear wheels on this truck.
Posted via Mobile Device

fabguy · 09-19-2010, 12:45 PM

Quote:

Originally Posted by bill c

this what im working on.72 step side. got a long way to go....

What is the combination you are using here, ( ie: stock a arms? 3" spindle drop?) how far is frame from the ground? I don't want to replace a arms if I dont have to. I have a 1958 fleetside sitting on a similar frame.

droppedc_class · 09-20-2010, 10:02 PM

Thanks for the words of encouragement guys!!
Gotta order a disc break kit & lines for the rear & start checking around for a 5.3l
engine and 4l60 trans. out of a 05 or 06 chevy, going that direction with the drivetrain
since I sold my other engine.
Heres a pic of it mocked up before it was taken apart to have the frame sandblasted,
and the rest of bodywork and primer done

billdo · 09-24-2010, 12:58 PM

http://www.facebook.com/video/video.php?v=1425022989955 heres a video of my 67 bagged at a car show which i took first at. they asked for a burn out so i did one better and did it from the engine bay. Its only a one legger right now i need to go posi hope you enjoy

joe231 · 09-24-2010, 01:09 PM

that's cool
Are those trailer hitch balls at the back of the frame?
Draggin' balls

Posted via Mobile Device

Mayo · 09-24-2010, 11:09 PM

Awesome truck

tk-mpl · 09-25-2010, 12:43 AM

pretty cool vid man......... What size of air line and valves are you using???

billdo · 09-25-2010, 03:25 PM

im running half inch copper all around with 3/8 dump and half fill but i slowed it all down cause i would hop like 3 inches before i drilled pipe plugs with an 1/8 hole for the dumps and put a pipe plug with a 1/4 hole in the fill. and the balls are for dragging the spark like crazy and are easy to swap out and only cost 9 bucks. i have 700 miles on it in 3 weeks. and its been very good so far i should do a build up wright up cause its been a full resto mod for 3 years i built the frame when i was 17 and and now im 21. i got about 15 grand in it everything is new and built by me. its so much fun.

*project 67 sub* · 09-27-2010, 08:58 PM

haha look at the guys in the back standing next to their ricer cars lol. probably hatin like a mofo, anyways nice truck and video. is that huge tank in the back your gas tank?

billdo · 09-28-2010, 12:33 PM

yeah the keg is a gas tank. its legit even got a gm sending unit in it

*project 67 sub* · 09-28-2010, 08:08 PM

haha sweet, to bad you couldnt drop it down some as it sticks up a little high lol

billdo · 09-28-2010, 09:29 PM

it dont bother me when im driving its not in the way. heres the rest of the pics from the show. IMG]http://i49.photobucket.com/albums/f261/icanttink1/truck/truck6.jpg[/IMG]

VA72C10 · 09-28-2010, 09:40 PM

Those gauges are pretty cool. Really like the overall look you got going on!

billdo · 09-28-2010, 09:50 PM

thanks man i wish u could see the shift know its just a beautiful pair of tits. im gonna have the door panels and glove box all pin striped and ed roth arted up.

*project 67 sub* · 09-29-2010, 03:47 PM

Quote:

Originally Posted by billdo

it dont bother me when im driving its not in the way. heres the rest of the pics from the show. IMG]http://i49.photobucket.com/albums/f261/icanttink1/truck/truck6.jpg[/IMG]

sweet, any pics of your frame and suspension set up front and rear?

billdo · 09-29-2010, 06:39 PM

http://www.facebook.com/profile.php?id=548245327
this is my facebook in my pictures i have a whole album of pics if you dont have fb ill post pics

billdo · 09-29-2010, 06:43 PM

heres one more

draggin70 · 09-29-2010, 10:45 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

*project 67 sub* · 09-30-2010, 03:07 AM

nope no face book lol.

billdo · 09-30-2010, 01:56 PM

68 Quad C10 · 09-30-2010, 05:53 PM

Nice

*project 67 sub* · 09-30-2010, 06:54 PM

x2

draggin70 · 10-03-2010, 12:28 AM

Here are a few of the engine... I just picked up a polished TPI " THANKS CRAIGSLIST "

VA72C10 · 10-03-2010, 01:03 AM

Very nice!!! That TPI looks great!

09-20-2010, 10:02 PM	#1129
droppedc_class Registered User Join Date: Aug 2008 Location: amory,ms Posts: 23	Re: How about some pics of bagged C-10's Thanks for the words of encouragement guys!! Gotta order a disc break kit & lines for the rear & start checking around for a 5.3l engine and 4l60 trans. out of a 05 or 06 chevy, going that direction with the drivetrain since I sold my other engine. Heres a pic of it mocked up before it was taken apart to have the frame sandblasted, and the rest of bodywork and primer done __________________

09-24-2010, 12:58 PM	#1130
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's http://www.facebook.com/video/video.php?v=1425022989955 heres a video of my 67 bagged at a car show which i took first at. they asked for a burn out so i did one better and did it from the engine bay. Its only a one legger right now i need to go posi hope you enjoy

09-24-2010, 01:09 PM	#1131
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: How about some pics of bagged C-10's that's cool Are those trailer hitch balls at the back of the frame? Draggin' balls Posted via Mobile Device __________________ *CHEVY ONLY*

09-24-2010, 11:09 PM	#1132
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: How about some pics of bagged C-10's Awesome truck __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

09-25-2010, 12:43 AM	#1133
tk-mpl Registered User Join Date: Jan 2008 Location: Lacombe, Alberta Posts: 353	Re: How about some pics of bagged C-10's pretty cool vid man......... What size of air line and valves are you using??? __________________ 1968 short box stepside. 2007 5.3L 4L60, tuned w/EFI Live 2005 Silverado bucket seats. Dominator 2600's all around. Porterbuilt tubular control arms. Magnaflow 3" dual exhaust.

09-25-2010, 03:25 PM	#1134
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's im running half inch copper all around with 3/8 dump and half fill but i slowed it all down cause i would hop like 3 inches before i drilled pipe plugs with an 1/8 hole for the dumps and put a pipe plug with a 1/4 hole in the fill. and the balls are for dragging the spark like crazy and are easy to swap out and only cost 9 bucks. i have 700 miles on it in 3 weeks. and its been very good so far i should do a build up wright up cause its been a full resto mod for 3 years i built the frame when i was 17 and and now im 21. i got about 15 grand in it everything is new and built by me. its so much fun.

09-27-2010, 08:58 PM	#1135
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: How about some pics of bagged C-10's haha look at the guys in the back standing next to their ricer cars lol. probably hatin like a mofo, anyways nice truck and video. is that huge tank in the back your gas tank?

09-28-2010, 12:33 PM	#1136
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's yeah the keg is a gas tank. its legit even got a gm sending unit in it

09-28-2010, 08:08 PM	#1137
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: How about some pics of bagged C-10's haha sweet, to bad you couldnt drop it down some as it sticks up a little high lol

09-28-2010, 09:29 PM	#1138
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's it dont bother me when im driving its not in the way. heres the rest of the pics from the show. IMG]http://i49.photobucket.com/albums/f261/icanttink1/truck/truck6.jpg[/IMG]

09-28-2010, 09:40 PM	#1139
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How about some pics of bagged C-10's Those gauges are pretty cool. Really like the overall look you got going on! __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-28-2010, 09:50 PM	#1140
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's thanks man i wish u could see the shift know its just a beautiful pair of tits. im gonna have the door panels and glove box all pin striped and ed roth arted up.

09-29-2010, 06:39 PM	#1142
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's http://www.facebook.com/profile.php?id=548245327 this is my facebook in my pictures i have a whole album of pics if you dont have fb ill post pics

09-29-2010, 06:43 PM	#1143
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's heres one more

09-29-2010, 10:45 PM	#1144
draggin70 Registered User Join Date: Jun 2009 Location: Murrieta California Posts: 43	Re: How about some pics of bagged C-10's Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by Liz; 09-29-2010 at 11:53 PM. Reason: please keep classified ads and notifications of pending sales in the classified area.



Register or Log In To remove these advertisements.

09-30-2010, 03:07 AM	#1145
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: How about some pics of bagged C-10's nope no face book lol.

09-30-2010, 01:56 PM	#1146
billdo Registered User Join Date: Oct 2007 Location: hopewell jct new york Posts: 140	Re: How about some pics of bagged C-10's

09-30-2010, 05:53 PM	#1147
68 Quad C10 Registered User Join Date: Jul 2009 Location: Idaho Falls Posts: 324	Re: How about some pics of bagged C-10's Nice __________________ http://www.tandscustomcars.com/ My Quad Cab build:http://67-72chevytrucks.com/vboard/s...d.php?t=352342 IT"S GOT A ROOF NOW WHOO HOO!!!! 65 GTO Build (If you wanna check it out) http://67-72chevytrucks.com/vboard/s...40#post4503040

09-30-2010, 06:54 PM	#1148
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: How about some pics of bagged C-10's x2

10-03-2010, 12:28 AM	#1149
draggin70 Registered User Join Date: Jun 2009 Location: Murrieta California Posts: 43	Re: How about some pics of bagged C-10's Here are a few of the engine... I just picked up a polished TPI " THANKS CRAIGSLIST " Attached Images

10-03-2010, 01:03 AM	#1150
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: How about some pics of bagged C-10's Very nice!!! That TPI looks great! __________________ Looking for a 67-72 swb or blazer project in or around VA.

Register or Log In To remove these advertisements.