How to: Ruin a perfectly good C10 - Page 47 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Bennett68C10 · 10-28-2016, 01:08 PM

Quote:

Originally Posted by gringoloco

Wife just sent me this pic:

...and so it begins (continues?)...

I think I know what's in that box

gringoloco · 10-28-2016, 04:13 PM

Quote:

Originally Posted by Bennett68C10

I think I know what's in that box

I can't wait to take a measuring device to these things (and compare them to my Belltechs)! I've read and heard multiple different guesses and proposals on how much he track is narrowed. I want to quantitatively dispel all rumors

Stickman · 10-29-2016, 10:25 AM

Quote:

Originally Posted by gringoloco

So, it looks like we're gonna end up with an 'extreme'ly low static coilover drop. I'll keep the thread up-to-date with any further changes (hopefully no mas)

Thanks and good luck! Only one way to know if you can do it, and that's to try. They have a much better selection of colors available now than they did a few years ago. Great quality paint, that I think I'll be using more of soon...

Glad to hear your going with the extreme coilovers and we can observe your expertise , no change in the rear with the No Limit trailing arm set up correct.

gringoloco · 10-29-2016, 12:20 PM

Quote:

Originally Posted by kehstr

wait... so what was in that box?

A set of CPP modular drop spindles. Hoping they will provide a narrower track-width (I'm eager to compare them to my Belltech drop spindles), which will provide clearance for turning at super-low heights (and maybe a deeper-dish wheel

). I also went with the 1" narrowed arms from PB

Quote:

Originally Posted by Stickman

Glad to hear your going with the extreme coilovers and we can observe your expertise , no change in the rear with the No Limit trailing arm set up correct.

The NL rear kit has been sold to another member. The 'current' plan involves a PB level 3 (extreme) v7 coilover Dropmember up front and level 2 (touring) coilover Dropmember out back. Sorry for all of the confusion--I just barely have figured out what's going on myself

The boxes should start piling up, soon: PB suspension/hood hinges, Ridetech coilovers (via shores6), HartRod ChubTubz, Hill's Rod and Custom inner fenders, and a bunch of other stuff from places I haven't ordered yet--still need Boyd's fuel tank, steering rack/hoses/linkage and a bunch of other hard/soft parts--aaaaah! this is the snowball I was trying to avoid

smbrouss70 · 10-30-2016, 10:05 AM

Quote:

Originally Posted by gringoloco

aaaaah! this is the snowball I was trying to avoid

Yeah, but admit it... playing in the snow is so damn fun, huh?

kehstr · 10-30-2016, 11:29 PM

Quote:

Originally Posted by gringoloco

still need Boyd's fuel tank

you mean like this...
Name: DSCF0163.jpg
Views: 1969
Size: 44.1 KB

kehstr · 10-29-2016, 01:00 AM

wait... so what was in that box?

gringoloco · 10-31-2016, 06:58 PM

Good to hear! I've never seen one in person, but I've never seen a bad review on one. Im a little side-tracked with putting together an AOD to t5 swap on the Muskrat, so I've taken a break on ordering truck parts (for the moment). I have some time to kill while I wait for the PB bits...

gringoloco · 11-27-2016, 05:10 PM

Still stockpiling parts:

mcbassin · 11-28-2016, 11:57 AM

Killer truckload of parts!

**Hart_Rod** · 11-28-2016, 01:35 PM

You should be busy for a while!

MMcMasters · 11-28-2016, 02:36 PM

You have to be itching to get started.The suspense is getting to me and it's not my build!

Deer_hunter_088 · 01-09-2017, 03:52 PM

ttt

smbrouss70 · 01-25-2017, 12:15 PM

Bueller?... Bueller?... Bueller?...

You have to have something to show us by now... You don't want the natives getting restless, do you?

kehstr · 01-30-2017, 04:05 PM

I think we are all getting restless waiting to hear some news!! Even if it is just saying you have been too busy to work on your truck with your wife's car being a priority

kehstr · 04-20-2017, 09:51 PM

Any updates?

gringoloco · 05-28-2017, 07:28 PM

Quote:

Originally Posted by Deer_hunter_088

ttt

Quote:

Originally Posted by smbrouss70

Bueller?... Bueller?... Bueller?...

You have to have something to show us by now... You don't want the natives getting restless, do you?

Quote:

Originally Posted by kehstr

I think we are all getting restless waiting to hear some news!! Even if it is just saying you have been too busy to work on your truck with your wife's car being a priority

Quote:

Originally Posted by kehstr

Any updates?

Sorry, guys! Yes, I'm alive. Been sidetracked with the snow, kids, wife, masters, work, life in general, the Mustang, a new Jeep, and my wife's 'new' car, a '66 Bahama Blue Beetle. Needs more low, and a few other things, but I haven't forgotten about the truck

gringoloco · 05-28-2017, 07:32 PM

Here's what the suspension looks like out of the boxes. It's all been to powder since, but no pics of that

Still working on rounding up parts, but making a conscious effort to get everything collected and ready to start, um, soon?

smbrouss70 · 05-28-2017, 10:06 PM

I thought you had gone with an air setup. I can't wait to see how it sits with an extreme coil-over!!!

NewType72 · 05-29-2017, 04:45 AM

Yay new parts!

SCOTI · 05-30-2017, 12:50 AM

You ever need a hand in the garage, let me know. Eagerly waiting to see the next round of changes.

gringoloco · 05-31-2017, 09:56 PM

Quote:

Originally Posted by smbrouss70

I thought you had gone with an air setup. I can't wait to see how it sits with an extreme coil-over!!!

I was planning on air initially. The thought was to keep it simple, ll trying to control the snowball...

Quote:

Originally Posted by NewType72

Yay new parts!

Yes, pretty pumped. Just hafta round up the rest of the required stuff. The list is short-ish: rack, fuel tank, misc., but the list will grow if I decide to LS swap it while I'm at it (found a great deal on a 5.3, buuuut... reference the snowball comment above).

Quote:

Originally Posted by SCOTI

You ever need a hand in the garage, let me know. Eagerly waiting to see the next round of changes.

I may be a bit far away now, though we're back from UK, we landed (temporarily) in UT! I miss the southern hospitality

Orange67 · 05-31-2017, 10:42 PM

Hey! I offered help! Lol actually, to be honest, equal amounts of help and envy...

Tommyh5 · 06-02-2017, 11:05 AM

47 pages deep and the project has a long way to go! Wow. I am impressed. I am looking forward to seeing this through. My goal is an extreme coilover drop on mine as well. Good work bud.

gringoloco · 06-02-2017, 10:03 PM

Quote:

Originally Posted by Orange67

Hey! I offered help! Lol actually, to be honest, equal amounts of help and envy...

Don't envy the amount of work ahead of me!

Quote:

Originally Posted by Tommyh5

47 pages deep and the project has a long way to go! Wow. I am impressed. I am looking forward to seeing this through. My goal is an extreme coilover drop on mine as well. Good work bud.

Thanks, and welcome to the forum! They're never done, I'll keep chipping away at it til I can't anymore. Speaking of...

Started assembling the porterbuilt bits. They are powdercoated in a color called evo grey that is matte metallic and flips from silver to almost black, depending on the lighting. I like it!

10-29-2016, 01:00 AM	#7
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: How to: Ruin a perfectly good C10 wait... so what was in that box? __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

10-31-2016, 06:58 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Good to hear! I've never seen one in person, but I've never seen a bad review on one. Im a little side-tracked with putting together an AOD to t5 swap on the Muskrat, so I've taken a break on ordering truck parts (for the moment). I have some time to kill while I wait for the PB bits... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-27-2016, 05:10 PM	#9
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Still stockpiling parts: Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-28-2016, 11:57 AM	#10
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How to: Ruin a perfectly good C10 Killer truckload of parts! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-28-2016, 01:35 PM	#11
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: How to: Ruin a perfectly good C10 You should be busy for a while! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

11-28-2016, 02:36 PM	#12
MMcMasters Registered User Join Date: Dec 2012 Location: Rochester, IL Posts: 537	Re: How to: Ruin a perfectly good C10 You have to be itching to get started.The suspense is getting to me and it's not my build! __________________ __________________ Mike 70 Med Olive build http://67-72chevytrucks.com/vboard/s...d.php?t=714804 Instagram- protouring66

01-09-2017, 03:52 PM	#13
Deer_hunter_088 Registered User Join Date: Aug 2016 Location: Mount Carmel Illinois Posts: 1,321	Re: How to: Ruin a perfectly good C10 ttt __________________ 1994 k1500, Oldredz71(ext shorty 4x4 6 in lift) 1998 S10ZR2 2005 Silverado 2500hd(tow pig) Made in the USA, just like my trucks

01-25-2017, 12:15 PM	#14
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: How to: Ruin a perfectly good C10 Bueller?... Bueller?... Bueller?... You have to have something to show us by now... You don't want the natives getting restless, do you? __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

01-30-2017, 04:05 PM	#15
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: How to: Ruin a perfectly good C10 I think we are all getting restless waiting to hear some news!! Even if it is just saying you have been too busy to work on your truck with your wife's car being a priority __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

04-20-2017, 09:51 PM	#16
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: How to: Ruin a perfectly good C10 Any updates? __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

05-28-2017, 07:32 PM	#18
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: How to: Ruin a perfectly good C10 Here's what the suspension looks like out of the boxes. It's all been to powder since, but no pics of that Still working on rounding up parts, but making a conscious effort to get everything collected and ready to start, um, soon? Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

05-28-2017, 10:06 PM	#19
smbrouss70 Registered User Join Date: Sep 2003 Location: Rayne, LA Posts: 2,784	Re: How to: Ruin a perfectly good C10 I thought you had gone with an air setup. I can't wait to see how it sits with an extreme coil-over!!! __________________ Steven "If dogs don't go to heaven, when I die I want to go wherever they went." -- Will Rogers R.I.P. Oscar R.I.P. Ratchet 1967 Pontiac GTO - Dad was the Original Owner 1970 Chevy 2wd SWB "Oscar's Truck" 1970 Chevy 2wd Blazer "Ratchet's Blazer" 2013 Chevy 2500HD Crew Cab Duramax/Allison Z71 LTZ "Brown Sugar" 2017 Chevy Suburban "BDB" 2020 Chevy Blazer Premier "Foxy" Member of Louisiana Classic Truck Club (LCTC) Shop Build

05-29-2017, 04:45 AM	#20
NewType72 Registered User Join Date: Feb 2012 Location: turlock Posts: 2,177	Re: How to: Ruin a perfectly good C10 Yay new parts! __________________ Project NewType 1972 Chevy C/10 Cheyenne Super ( Daily Driven Showtruck ) http://67-72chevytrucks.com/vboard/s...d.php?t=507903 Project Great Grandpa's Legacy 1973 Chevy C/10 Cheyenne ( Current daily driver collecting big time parts ) http://67-72chevytrucks.com/vboard/s...89#post7084289 - Dylan (209)-985-7721

05-30-2017, 12:50 AM	#21
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,031	Re: How to: Ruin a perfectly good C10 You ever need a hand in the garage, let me know. Eagerly waiting to see the next round of changes. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-31-2017, 10:42 PM	#23
Orange67 Registered User Join Date: Mar 2013 Location: Syracuse, Utah Posts: 499	Re: How to: Ruin a perfectly good C10 Hey! I offered help! Lol actually, to be honest, equal amounts of help and envy... __________________ Justin '67 C20 CST Custom Camper '04.5 LLY Duramax CCSB...sold



Register or Log In To remove these advertisements.

06-02-2017, 11:05 AM	#24
Tommyh5 Registered User Join Date: Feb 2017 Location: Fenton Posts: 1	Re: How to: Ruin a perfectly good C10 47 pages deep and the project has a long way to go! Wow. I am impressed. I am looking forward to seeing this through. My goal is an extreme coilover drop on mine as well. Good work bud.

Register or Log In To remove these advertisements.