58 GMC Project

[mayim]

Where could you have saved time or money if you were not building the show machine?

[CAL 58 GMC]

Originally Posted by mayim

Where could you have saved time or money if you were not building the show machine?

Buy a donor car, no extra chrome in the motor and a cheaper paint job. The rest depends on how much you want to upgrade the brakes and suspensions such as disc brakes or drum, power or non power brakes, power steering or non power steering, AC or no AC……..as you can see the list can go on and on.

[Bigdreamsnobux]

Just read the whole thread, and this truck is my wallpaper on my work computer now. Man is it great! You have a subframe like the one I will put in, and run exactly the same wheels I want, so:

What is the offset of the front wheels? I know you run air bags and I was thinking of sticking with 2" drop spindles only, but regardless of bagged or not, I am curious of how your fitment is. I have heard that clips like ours can be a little wide, so I wanted to confirm if there are any considerations/tips on how you got an 8" wheel in there ok without rubbing and if there is anything I should consider.

With regards to the rear wheels, what is the offset on these? I can figure out how wide your S10 rear axle is (I think that is what you put in right?), but did you have to widen the inner/outer wheel wells any?

Any tips related to front or rear wheel/tire fitment would be GREATLY appreciated!!!!!!

-Tobin.

[Bigdreamsnobux]

Duh, found the info on the rears in your posts originally, sorry.

[CAL 58 GMC]

Cool!!! Just make sure you don't go to wide on the tires since the clearance is close.

[Hhan's 57]

Cal 58 GMG I have to say that is one of the best looking trucks I have ever seen. I watched you you tube videos twice. Way to cool

[CAL 58 GMC]

Thanks Hhans! Glade you enjoyed the vid!

[CAL 58 GMC]

Okay, I spent most of the day installing the latest upgrade to my truck today with the help of my son. I plan and bought this a few months back, but I’ve been waiting on chrome for it. I will be at Brothers show this coming weekend so those of you who will be there will see it first and then I will post some pictures for the rest of you.

[Kabwe]

Originally Posted by CAL 58 GMC

Okay, I spent most of the day installing the latest upgrade to my truck today with the help of my son. I plan and bought this a few months back, but I’ve been waiting on chrome for it. I will be at Brothers show this coming weekend so those of you who will be there will see it first and then I will post some pictures for the rest of you.

I will see you there buddy

[Kim57]

Can't wait to see your truck up close.
Kim

[CAL 58 GMC]

Originally Posted by Kim57

Can't wait to see your truck up close.
Kim

Make sure to come up and introduce your self.

[entourageguy]

Guys try to get a group shot of you together. I think it would be great for the thread.

[02snoma]

Originally Posted by entourageguy

Guys try to get a group shot of you together. I think it would be great for the thread.

That would be pretty cool! I can't wait for the show.

[87Lowrider]

Originally Posted by CAL 58 GMC

In a nutshell, here's the break down.

Over $45k into the truck.
$12k in body & paint.
$3k in interior.
$7k in the motor & trans.
2.5 years to build in my garage & a dozen busted knuckles.

Just checkin' in.. gettin' caught up with the thread..

Everytime I walk out in the garage and see the '57 waiting patiently, I think of yours and how I want mine to look... Of course those numbers make me shiver!

Get those knuckles treated!

Kenny

[CAL 58 GMC]

Originally Posted by 87Lowrider

Just checkin' in.. gettin' caught up with the thread..

Everytime I walk out in the garage and see the '57 waiting patiently, I think of yours and how I want mine to look... Of course those numbers make me shiver!

Get those knuckles treated!

Kenny

You will get there I'm sure. Those numbers still make me shiver!

[entourageguy]

Cal says

In a nutshell, here's the break down.

Over $45k into the truck.
$12k in body & paint.
$3k in interior.
$7k in the motor & trans.
2.5 years to build in my garage & a dozen busted knuckles.


"The looks and comments you receive for all the hard work"

PRICELESS

[Kabwe]

Stop posting numbers like that it makes me ill.lol I've been hiding some parts and all my receipts from the wife.lol

[CAL 58 GMC]

Originally Posted by Kabwe

Stop posting numbers like that it makes me ill.lol I've been hiding some parts and all my receipts from the wife.lol

If I think about It to much it makes me ill and make me shiver too !! My wife really does not know how much I have in it and she never will!!

[02snoma]

I love slaving away in the garage in 110 degree heat...giving your truck the love it deserves (polish, wax, etc.) It is well worth it. She is going to sparkle like never before by the end of the night!!!

[CAL 58 GMC]

Originally Posted by 02snoma

I love slaving away in the garage in 110 degree heat...giving your truck the love it deserves (polish, wax, etc.) It is well worth it. She is going to sparkle like never before by the end of the night!!!

What a good son!!

[CAL 58 GMC]

Well another year that I missed Brothers Truck show. My day went from bad to worse all day long. I started Saturday morning, I go pick up the car trailer from united rentals. I get the trailer home to find out the brake lights and right turn signal did not work. I pull out my volt meter and sure enough, the trailer has a short some place. So I go all the way back to pick up a new trailer. So now I get home to load the truck onto the trailer, I go to pull the ramps from under the trailer and find one of them is jammed in. So we pull out the floor jack and lifted the trailer so my son could use a hammer to bang the ramp free. Finally, were on our way down south. All is going well until were stated going up the Grapevine, just about 3/4 of a mile up and my tow vehicle starts pinging really bad and then started loosing power and it over heated. So we pull over to let it cool down. Now the hard part, what to do? Knowing the Grapevine is up and down for the next 50 miles or so I had no choice but to turn back. So we pulled the 58 off the trailer so I could drive up hill to the next ramp to turn around as my son followed me back down in my 58. Once at the bottom, we put the 58 back on the trailer and drove home. Just as I pulled up to my house to top it all off my radiator hose blew out. For me, it's more disappointing to miss the chance to meet all of you who were going then to miss the show it self. Hopefully next year.

Here's the one and only picture I took, right before we left to the show.

[entourageguy]

Man what bummer Cal. Right now 7:20 am we are checking the weather network to see if we will go to a show. My wife laughs about the weather watching.
Hope thing work out with your Dad.

[Tri5Nerd]

That sucks! I was looking forward to meeting and the rest of the guys on from the forum. Concentrate on fixing the problems have beer.

[55ChevyPU]

Ahh! So thats why your truck wasn't there I waited around till 12:30 then figured something might have happened. To be honest the show wasn't all that great, was pretty unorganized and also overcast and humid. Also there were only a few really amazing cars there, of course your PU would have been up there! Oh well how about next year I will have my Chevy ready and we can hang out next to each other.

[Kim57]

Sorry to here of your troubles CAl.
I was also there and just happened to meet tri5. We were both looking at the same truck and struck up a conversation about what we were building. He's a real nice guy. Was hoping to meet others from the board but when you weren't able to make it we had no place to hook up. Maybe we'll have better luck next time.
heres a link to the pics I shot at the show.
Kim
http://www.picturetrail.com/gallery/view?username=kdeh