1971 c10 stepside - Page 48 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69CST-V · 03-26-2013, 10:22 AM

Sweet. Looking good.

AJohn6 · 03-26-2013, 10:32 AM

Raull,

Truck is looking great man and I really like the look of the edelbrock intake. I had a feeling you might have problems with the A/C compressor. At least it is on its own belt so, theoretically, you can place it almost anywhere in that general area and build brackets if needed.

-Adam

**67cheby** · 03-26-2013, 05:53 PM

SWEET !!! dig that intake !

raull · 03-29-2013, 08:53 AM

Quote:

Originally Posted by 69CST-V

Sweet. Looking good.

Thanks Bryce !!!

Quote:

Originally Posted by AJohn6

Raull,

Truck is looking great man and I really like the look of the edelbrock intake. I had a feeling you might have problems with the A/C compressor. At least it is on its own belt so, theoretically, you can place it almost anywhere in that general area and build brackets if needed.

That's whats in the works now brainstorming on new brackets !!!!
-Adam

Quote:

Originally Posted by zellway

Don't know if this will help but it will get the comp
up out of the frame.

Thanks I've been told about relocating but I'm stubborn !!! Lol

http://www.nostalgicairparts.com/air...racket-836.php

Quote:

Originally Posted by 67cheby

SWEET !!! dig that intake !

Thanks mike !!!!
Posted via Mobile Device

big_al_71 · 03-29-2013, 10:35 AM

Stay focused brother.......

mcbassin · 03-29-2013, 11:14 AM

Very nice! Always top notch parts here.

raull · 03-29-2013, 06:48 PM

Quote:

Originally Posted by big_al_71

Stay focused brother.......

Double focus !!!!!

Quote:

Originally Posted by mcbassin

Very nice! Always top notch parts here.

Thanks bud !!!!! Your right there with me !!!!
Posted via Mobile Device

**Hart_Rod** · 03-31-2013, 10:32 AM

Some how or another I lost track of this thread, (I've got way to much stuff going on)...you've made great progress Raul! I can't wait to see this in person. Have you checked into the Holley LS bracket setup? I'm thinking about using that on mine. Once I get the new motor/tranny in my 68 installed, I plan on taking a road trip down south,

Posted via Mobile Device

raull · 04-01-2013, 04:08 PM

Quote:

Originally Posted by Hart_Rod

Some how or another I lost track of this thread, (I've got way to much stuff going on)...you've made great progress Raul! I can't wait to see this in person. Have you checked into the Holley LS bracket setup? I'm thinking about using that on mine. Once I get the new motor/tranny in my 68 installed, I plan on taking a road trip down south,

Posted via Mobile Device

Hey rob !!! Glad to hear from you , maybe when you drive down you can bring that crazy kid neighbor of yours !!! Medero !!!
Posted via Mobile Device

jmedero · 04-01-2013, 05:15 PM

Haha. I'm in for half the gas and ill get the snacks.
Posted via Mobile Device

**superflysteiny** · 04-30-2013, 02:53 PM

any updates

big_al_71 · 04-30-2013, 04:10 PM

Quote:

Originally Posted by superflysteiny

any updates

He has not touched the truck for over a month...He has alot going on in his job.....Soon he will be back on it..Believe me I am all over him about getting this bucket done

raull · 05-01-2013, 08:31 PM

Quote:

Originally Posted by superflysteiny

any updates

Quote:

Originally Posted by big_al_71

He has not touched the truck for over a month...He has alot going on in his job.....Soon he will be back on it..Believe me I am all over him about getting this bucket done

Soon boys !! Soon !!
Posted via Mobile Device

Zoomin · 05-15-2013, 12:35 AM

Quote:

Originally Posted by raull

Soon boys !! Soon !!

Sooner is now later! Wassup?!?

Posted via Mobile Device

87squarebody · 05-22-2013, 12:31 PM

Any progress

jmedero · 05-01-2013, 08:44 PM

Take your time man.... It will be worth the wait.
Posted via Mobile Device

Bennett68C10 · 05-23-2013, 08:18 AM

Hurry up with that new job, we need updates

congrats on the new job, hope it allows for many more goodies for the stepper
Posted via Mobile Device

Gun Fighters Garage · 06-02-2013, 12:50 PM

The step side looks sick..
Posted via Mobile Device

**CC69Rat** · 06-02-2013, 07:34 PM

We miss you brother! Come back soon..

Posted via Mobile Device

raull · 06-08-2013, 10:37 AM

Quote:

Originally Posted by Bennett--G4L

Hurry up with that new job, we need updates

congrats on the new job, hope it allows for many more goodies for the stepper
Posted via Mobile Device

Quote:

Originally Posted by Gun Fighters Garage

The step side looks sick..
Posted via Mobile Device

Quote:

Originally Posted by CC69Rat

We miss you brother! Come back soon..

Posted via Mobile Device

Thanks guys !!! I spoke with Justin from scottshotrods on Friday and he is going to build me some new custom mounts to re locate my engine to help me with some issues I'm facing so I can move forward !!!!
Posted via Mobile Device

**screaminchevypickup** · 06-08-2013, 11:30 AM

What issues are you having to need new mounts?
Posted via Mobile Device

big_al_71 · 06-08-2013, 12:11 PM

Quote:

Originally Posted by screaminchevypickup

What issues are you having to need new mounts?
Posted via Mobile Device

Raul was at my house thursday to watch the heat game and take some measurements of my engine compartment seems like the way the motor is sitting it is not allowing for some lines to fit where they have to go thru from what I understood. The motor may be sitting too high also and his intake may hit the hood. I better let him explain as he has that puerto rican inguinity flowing thru his head

jmedero · 06-08-2013, 07:16 PM

Pue dale mijo.
Posted via Mobile Device

raull · 06-09-2013, 09:50 PM

the engine sat perfect in the compartment , its the accessory drive kit that i want to use the problem , the compressor idler pulley hits the rack and pinion and the compressor been way at the bottom also it hits the engine mounts cradles , no biggie little set back thats all , Justin said he'll have them done for me in a day or so

**Hart_Rod** · 07-02-2013, 10:44 AM

Quote:

Originally Posted by raull

the engine sat perfect in the compartment , its the accessory drive kit that i want to use the problem , the compressor idler pulley hits the rack and pinion and the compressor been way at the bottom also it hits the engine mounts cradles , no biggie little set back thats all , Justin said he'll have them done for me in a day or so

OK Raul, here's my update, where's yours?????

03-26-2013, 10:22 AM	#1
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: 1971 c10 stepside Sweet. Looking good. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

03-26-2013, 10:32 AM	#2
AJohn6 Knuckle head Join Date: Mar 2008 Location: NC Posts: 283	Re: 1971 c10 stepside Raull, Truck is looking great man and I really like the look of the edelbrock intake. I had a feeling you might have problems with the A/C compressor. At least it is on its own belt so, theoretically, you can place it almost anywhere in that general area and build brackets if needed. -Adam __________________ Adam '71 SWB/Step http://67-72chevytrucks.com/vboard/s...d.php?t=291750 2017 Crew Cab Silverado LTZ with 6.2l, 8 Speed tuned by RPM in Garner, NC '00 Chevy 1500 6.0l Silverado Reg. Cab Short Bed '09 Chevy 1500 5.3l Silverado Crew Cab Short Bed (SOLD) 1971 LWB on 2014 1 ton chassis, L96 6.0LS / 6L90E http://67-72chevytrucks.com/vboard/s...d.php?t=796785 1969 LWB C10- Future project, possible AWD C10 on a 2002 Escalade Chassis.

03-26-2013, 05:53 PM	#3
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: 1971 c10 stepside SWEET !!! dig that intake ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

03-29-2013, 10:35 AM	#5
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: 1971 c10 stepside Stay focused brother....... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

03-29-2013, 11:14 AM	#6
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1971 c10 stepside Very nice! Always top notch parts here. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

03-31-2013, 10:32 AM	#8
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,837	Re: 1971 c10 stepside Some how or another I lost track of this thread, (I've got way to much stuff going on)...you've made great progress Raul! I can't wait to see this in person. Have you checked into the Holley LS bracket setup? I'm thinking about using that on mine. Once I get the new motor/tranny in my 68 installed, I plan on taking a road trip down south, Posted via Mobile Device Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 03-31-2013 at 10:38 AM.

04-01-2013, 05:15 PM	#10
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Haha. I'm in for half the gas and ill get the snacks. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

04-30-2013, 02:53 PM	#11
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1971 c10 stepside any updates __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

05-22-2013, 12:31 PM	#15
87squarebody Registered User Join Date: Jun 2012 Location: Lakeland fl Posts: 67	Re: 1971 c10 stepside Any progress

05-01-2013, 08:44 PM	#16
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Take your time man.... It will be worth the wait. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

05-23-2013, 08:18 AM	#17
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: 1971 c10 stepside Hurry up with that new job, we need updates congrats on the new job, hope it allows for many more goodies for the stepper Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

06-02-2013, 12:50 PM	#18
Gun Fighters Garage Registered User Join Date: Mar 2013 Location: Battle Ground WA Posts: 5	Re: 1971 c10 stepside The step side looks sick.. Posted via Mobile Device

06-02-2013, 07:34 PM	#19
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,206	Re: 1971 c10 stepside We miss you brother! Come back soon.. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

06-08-2013, 11:30 AM	#21
screaminchevypickup Laid Back Join Date: Apr 2010 Location: mcloud ok Posts: 2,658	Re: 1971 c10 stepside What issues are you having to need new mounts? Posted via Mobile Device __________________ 72 chevy swb Direct dealers for.. Vintage Air, Porterbuilt, Billet Specialties,Budnik wheels ,eddie motorsports, raceline wheels, intro wheels, Dakota Digital, precision, unisteer, Trimparts, and many many more... Laid Back Recreations.. Full restoration shop and full paint and body.. Kyle http://67-72chevytrucks.com/vboard/s...d.php?t=574629

06-08-2013, 07:16 PM	#23
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,072	Re: 1971 c10 stepside Pue dale mijo. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

06-09-2013, 09:50 PM	#24
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 1971 c10 stepside the engine sat perfect in the compartment , its the accessory drive kit that i want to use the problem , the compressor idler pulley hits the rack and pinion and the compressor been way at the bottom also it hits the engine mounts cradles , no biggie little set back thats all , Justin said he'll have them done for me in a day or so __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

Register or Log In To remove these advertisements.