Project Vitamin C-10 - Page 48 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

MacAttack · 05-21-2009, 10:00 AM

Quote:

Originally Posted by 4dranch

I would come help you Alan, but I can"t work with white cotton gloves on...

Oh No!

Now that's some funny chit right there....

joe231 · 05-21-2009, 10:19 AM

maybe the angle of the pic, but it looks like you wedge is turned 90 degrees from where it should be....the studs should be horizontal

like this one

or is it the vertical style bracket????

Alan's Classic · 05-21-2009, 10:21 AM

Quote:

Originally Posted by 4dranch

I would come help you Alan, but I can"t work with white cotton gloves on...
How can you do all that work in one day and not get one finger print, smudge, grease spot or anything anywhere? Hell I can't open my beer without them little grease finger prints on the sides of the can.

Is the frame and the top of the cab the same color?

I'm amazed

Very sharp work

It's called an operating room.

The camera hides alot of stuff. Yes the frame and top of the cab is the same color. Thanks David.

Quote:

Originally Posted by jason65

Looks awsome! Are you gonna put a grey stripe down the side between the trim?

Thanks Jason, yes I plan on painting the area in the mouldings the same as the top.

Quote:

Originally Posted by scotts62

Man Alan thats looking good!! At the rate you going on that you can drive it to our meet!

The firewall to engine clearance is about what i have on mine too. I know i would like mine to be closer but oh well.

Thanks Scott, it's all labor right now. I need to sell some stuff so I can afford more parts. But I have plenty to keep me busy for now.

Quote:

Originally Posted by MacAttack

Oh No!

Now that's some funny chit right there....

No respect

joe231 · 05-21-2009, 10:25 AM

oops, I meant the bolts should be horizontal....

damn you no editing after a few minutes (shakes fist at the screen)

protrash64 · 05-21-2009, 10:47 AM

Alan, you have the engine mounted in the front holes thus the clearance behind the engine. Pointing it out in case you want to change it, but it works for me. You mite run out of space at the radiator depending on your mounting location. I believe the factory had two ways of mounting the radator; mine is against the core support so I have no issues. Heads up!!

joe231 · 05-21-2009, 11:01 AM

I tried mount our towers in the forward holes, but would have had to drill new holes in the cross member for it to work....is that how you did it Jeff?

protrash64 · 05-21-2009, 11:13 AM

I dont remember Joe...too long ago. I know I slotted the holes a bit for some adjustment and I was careful to make sure the holes for the motor mount bolts stayed in the same relative width. Im wondering if I flipped them from side to side????? I'll have to look.

joe231 · 05-21-2009, 11:14 AM

I tried the side to side thing, angle was wrong I believe....

protrash64 · 05-21-2009, 11:21 AM

Quote:

Originally Posted by joe231

I tried the side to side thing, angle was wrong I believe....

....I cant see the frame to be sure, Joe. I know I wouldnt have been afraid to drill if it needed it

. My truck is too low to get under it and look up into the X-member to know for sure. I'll find out eventually when I pull the engine for upgrades.

joe231 · 05-21-2009, 11:23 AM

Ain't no thang!!
i was just wondering..

jgh64pkup · 05-21-2009, 12:19 PM

looks good alan

kizer · 05-21-2009, 05:09 PM

Man that does look nice. I remembered reading somewhere that the bumpers would not be chrome. Are they going to be orange or the same color as the frame/top of cab?

ruffrida2005 · 05-21-2009, 07:27 PM

Can I come and work on someones truck I dont have any money to work on mine and i want to turn some wrenches. Help a fellow trucker out, and my wife and sons are being annoying. but I love them.

Alan's Classic · 05-21-2009, 07:39 PM

Quote:

Originally Posted by joe231

maybe the angle of the pic, but it looks like you wedge is turned 90 degrees from where it should be....the studs should be horizontal

like this one

or is it the vertical style bracket????

The one you posted looks different than mine. Here is the only pic I have of that area. The point is pointing up. Sorry for the small pic

Quote:

Originally Posted by protrash64

Alan, you have the engine mounted in the front holes thus the clearance behind the engine. Pointing it out in case you want to change it, but it works for me. You mite run out of space at the radiator depending on your mounting location. I believe the factory had two ways of mounting the radator; mine is against the core support so I have no issues. Heads up!!

The towers are from CPP and that was the only place they would fall in and line up. I'll mock everything up like the radiator and fan and see where I'm at. It will be a while cause I don't have the parts yet.

Quote:

Originally Posted by jgh64pkup

looks good alan

Quote:

Originally Posted by kizer

Man that does look nice. I remembered reading somewhere that the bumpers would not be chrome. Are they going to be orange or the same color as the frame/top of cab?

Thanks man!! The bumpers and grill will be the gray color.

Today I sanded down the inner fenders, headlight mount panel, cowl side pieces and glove box door. I wasn't happy with the way they turned out so hopefully I will get them painted tomorrow.

Alan's Classic · 05-21-2009, 07:40 PM

Quote:

Originally Posted by ruffrida2005

Can I come and work on someones truck I dont have any money to work on mine and i want to turn some wrenches. Help a fellow trucker out, and my wife and sons are being annoying. but I love them.

Come on. I don't have any cash either, but there is plenty of work to do.

ruffrida2005 · 05-21-2009, 07:56 PM

What radiator and fan are you running. My motor is pushed up because of the SD raised crossmember. so I just need a little help on it!

Alan's Classic · 05-21-2009, 08:00 PM

Quote:

Originally Posted by ruffrida2005

What radiator and fan are you running. My motor is pushed up because of the SD raised crossmember. so I just need a little help on it!

Not sure yet. I'm going to go back thru ChiefRockas post about radiators when the time comes.

joe231 · 05-21-2009, 08:26 PM

yeah that pic sucks...
how about a new pic with it painted and the wedge off

Strodder · 05-21-2009, 10:06 PM

Quote:

Originally Posted by joe231

yeah that pic sucks...
how about a new pic with it painted and the wedge off

Hey Joe, are you trying to hypnotize us with your Avatar?

shrunken66stroker · 05-21-2009, 10:11 PM

Quote:

Originally Posted by Strodder

Hey Joe, are you trying to hypnotize us with your Avatar?

That's how he got that 350 for free. He invited his neighbor over to see his new avatar and snuck out to wheel it over.

scotts62 · 05-21-2009, 10:11 PM

Quote:

Originally Posted by Strodder

Hey Joe, are you trying to hypnotize us with your Avatar?

No kidding that tripped me out when i saw it.. its like who the!!?? Oh nevermind its Joe

Sorry Alan about the hi-jack..

Strodder · 05-21-2009, 10:13 PM

Quote:

Originally Posted by scotts62

No kidding that tripped me out when i saw it.. its like who the!!?? Oh nevermind its Joe

Sorry Alan about the hi-jack..

NO YOUR NOT!

joe231 · 05-21-2009, 10:14 PM

Quote:

Originally Posted by Strodder

Hey Joe, are you trying to hypnotize us with your Avatar?

yes...you will send me all your money and good parts

Quote:

Originally Posted by shrunken66stroker

That's how he got that 350 for free. He invited his neighbor over to see his new avatar and snuck out to wheel it over.

shhh...don't give away all my secrets

Quote:

Originally Posted by scotts62

No kidding that tripped me out when i saw it.. its like who the!!?? Oh nevermind its Joe

Sorry Alan about the hi-jack..

your getting good at 'jackin'

jgh64pkup · 05-21-2009, 10:18 PM

at least its better than the steak one
it still makes me hungry though

joe231 · 05-21-2009, 10:26 PM

dang-it..
I did some testing....
it works on some people and they do what I tell them
but it just makes most people hungry

05-21-2009, 10:19 AM	#1177
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread maybe the angle of the pic, but it looks like you wedge is turned 90 degrees from where it should be....the studs should be horizontal like this one or is it the vertical style bracket???? __________________ *CHEVY ONLY* Last edited by joe231; 05-21-2009 at 10:20 AM.

05-21-2009, 10:25 AM	#1179
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread oops, I meant the bolts should be horizontal.... damn you no editing after a few minutes (shakes fist at the screen) __________________ *CHEVY ONLY* Last edited by joe231; 05-21-2009 at 10:26 AM.

05-21-2009, 10:47 AM	#1180
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: My 1965 build thread Alan, you have the engine mounted in the front holes thus the clearance behind the engine. Pointing it out in case you want to change it, but it works for me. You mite run out of space at the radiator depending on your mounting location. I believe the factory had two ways of mounting the radator; mine is against the core support so I have no issues. Heads up!! __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-21-2009, 11:01 AM	#1181
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread I tried mount our towers in the forward holes, but would have had to drill new holes in the cross member for it to work....is that how you did it Jeff? __________________ *CHEVY ONLY*

05-21-2009, 11:13 AM	#1182
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: My 1965 build thread I dont remember Joe...too long ago. I know I slotted the holes a bit for some adjustment and I was careful to make sure the holes for the motor mount bolts stayed in the same relative width. Im wondering if I flipped them from side to side????? I'll have to look. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

05-21-2009, 11:14 AM	#1183
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread I tried the side to side thing, angle was wrong I believe.... __________________ *CHEVY ONLY*

05-21-2009, 11:23 AM	#1185
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread Ain't no thang!! i was just wondering.. __________________ *CHEVY ONLY*

05-21-2009, 12:19 PM	#1186
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread looks good alan __________________ Gage 1967 C10 Shortbed Stepside

05-21-2009, 05:09 PM	#1187
kizer Its Deja Vu time again Join Date: Aug 2008 Location: Marysville, North of Seattle WA Posts: 815	Re: My 1965 build thread Man that does look nice. I remembered reading somewhere that the bumpers would not be chrome. Are they going to be orange or the same color as the frame/top of cab? __________________ Its not pretty but its mine to figure out. The build / The Photos / Build Diary

05-21-2009, 07:27 PM	#1188
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread Can I come and work on someones truck I dont have any money to work on mine and i want to turn some wrenches. Help a fellow trucker out, and my wife and sons are being annoying. but I love them. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

05-21-2009, 07:56 PM	#1191
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: My 1965 build thread What radiator and fan are you running. My motor is pushed up because of the SD raised crossmember. so I just need a little help on it! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

05-21-2009, 08:26 PM	#1193
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread yeah that pic sucks... how about a new pic with it painted and the wedge off __________________ *CHEVY ONLY*

05-21-2009, 10:18 PM	#1199
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: My 1965 build thread at least its better than the steak one it still makes me hungry though __________________ Gage 1967 C10 Shortbed Stepside

05-21-2009, 10:26 PM	#1200
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread dang-it.. I did some testing.... it works on some people and they do what I tell them but it just makes most people hungry __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.