Facebook Marketplace finds

[Wikid61]

$80.000! https://www.facebook.com/marketplace...3A108%7D%22%7D

[Jiggers72-GMC]

WOW 80 grand, that has to be the highest price so far,
well done Wikid

[72c20customcamper]

I had already looked at this one 25k new 6.0
https://www.facebook.com/marketplace...3A108%7D%22%7D

[georgieb51]

Originally Posted by special-K

Just a quick note here from me as a moderator. We appreciate all the trucks posted here, but let's keep with the 67-72s only theme. If there isn't a thread like this in the board for a truck you found, start one. I believe some of the other years already have a similar thread

Thanks Tim.

[Wikid61]

https://www.facebook.com/marketplace...b-9b6c0f3af2d5

[Wikid61]

https://www.facebook.com/marketplace...b-9b6c0f3af2d5

[Wikid61]

$4500. https://www.facebook.com/marketplace...b-9b6c0f3af2d5

[Wikid61]

I have for sale my 1972 Chevy C20 Custom long box with a 350 and Turbo 400 Trans. Runs, drives, and stops great. It's a Montana truck, so very solid. It does have rust holes on both sides of the floor pan and on the bottom of the doors to be patched. It's a very good all original candidate for a restoration. Or just drive as is. $5,500, https://www.facebook.com/marketplace...b-9b6c0f3af2d5

[Resto-Rand]

I love the look of that red truck above but I can't take the time to go thru rockers rust repairs again.

[Wikid61]

https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

1200. Non-runner. Long bed pick up. Been sitting a long time. She definitely got some rot. 307 with 3 speed on the column. Needs a flywheel to crank. Ran when parked. Repeat will not start. 1200 obo https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

Runs. Needs transmission. Has Disc brakes and power steering. Some work done. Heat works. All lights and gauges work. 305 board 30. Headed 2.2 valves. Eldebroke intake. Passed down generation to generation family owned. https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

1970 gmc 1500
Has the ac dash but the compressor is out of the truck. Also it will need a new plug for the heater to work.
350 engine and turbo 350 transmission
Drum power brakes with new booster and master cylinder and some other brake parts.
The truck runs and drives but hasn’t been drove in a couple months but fires right up.
Does have the normal rust for these of trucks in the cab and has rust in the bed side on the inside and the bottom supports of the bed. 3,900 obo https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

Im selling my 1971 chevy C10 for 13,500
. Edelbrock carburetor
. Edelbrock high rise
. Flow master mufflers
. Dz302 Cam
. 202 double hump heads
. New tires
. New rotors
.new dash pad
.new alpine radio bt
. New brakes
. New calipers
. New plug wires
. K/N air filter
. New flow master mufflers
Only thing wrong with it is that the timing needs to be set
Need to ask me any more questions call me https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

$4500. https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

I just got this truck don't know anything about it floor seem to be in pretty good shape motor does turn over has no wood left in the bottom of the bed play good for a patina rat rod truck would much rather sell but if you have to trade send me a picture of what you have will not respond to is this available will just block it https://www.facebook.com/marketplace...b-32df313041d2

[Wikid61]

Another $80,000 tag. XXXX I OWNED THIS TRUCK SINCE 1973
STARTED REBUILD 1999
ONLY DRIVEN TO CAR SHOWS &
CRUISINS - 112 TROPHIES

ENGINE:
Blue Print- GM 396 Dyno tested 514 HP/510 ft lbs @6000 rpm
Forged steel crank balanced rotating assembly
Forged pistons and connecting rods w/hasting moly rings

CYLINDER HEADS:
Aluminum 10.4:1- swirl polished 2.08 int and 1.60 exh valves

CAMSHAFT:
Roller- lift .544 intake .555 exh. 230 int/236 exh duration

TIMING SET:
Heavy Duty Double roller Chain.

INDUCTION:
Edelbrock "endurashine" performer air gap dual quad manifold
Edelbrock 500 cfm thunder series AVS carbs
Spectre custom dual air ram induction

EXHAUST:
Hooker competition metallic ceramic headers with Doug's electric cut outs
Custom 2.5 inch polished stainless steel mufflers and pipes

COOLING:
Heavy duty 4 core radiator. stainless steel 7 blade fan
Stock AC system with Old Air pro 6 ten compressor and update kit

TRANSMISSION:
700R4 overdrive Hi performance with 1700 stall converter
Red lined band overhaul kit / 3/4 commercial pack. forward sprag late model
TransGo full race shift kit. True cool trans cooler. Over rev pump kit
Lockar floor shifter. Detroit 4:10 Locker differential

SUSPENSION:
Air Ride Technologies with 2" drop spindles and wheel level control modules
Dual Viar 400c compressors, 5 gal tank, rear locator kits and shocks

WHEELS:
Pacer 16X8 polished aluminum

TIRES:
Michelin LTX M/X P225/70 R16

PAINT:
3 coats Matrix 9700 Black / 3 coats Matrix 85 clear. Red custom blend
Prep and paint 418 hrs

INTERIOR:
Fabricated mountings for 1995 Dodge 1500 pickup seats
Custom seat and console covering with red piping

CUSTOM DESIGNS:

2000 fabricate marker light tunnels on front and rear panels
Seal Cab exterior and interior seams. Recess radio antenna
Install 1995 Cadillac tail light fabrication to blend with tailgate and fenders
Create paint design on doors, bed and tailgate
Redesign area for spare tire accessibility

2003 Install 1990 Chevrolet suburban quad headlights with custom
mountings to fit a fabricated phantom billet aluminum grill

2014 Install Led-glow led lights in Grill, Engine, Cab, Bed, Wheel wells and chassis

2015 C Notch Frame 4" for rear axle clearance

2016 Redesign and fabricate Cab drip rail

2019 Install back-up lights on notched rear bumper
Daphne, AL
Location is approximate
Seller Information
Albert https://www.facebook.com/marketplace...b-32df313041d2
Joined Facebook in 2010

[Wikid61]

https://www.facebook.com/marketplace...2-6691bb8f7618

[Wikid61]

1971 C-10 Cheyenne pickup. One family owned since 1976. 350 2 barrel carb. Automatic transmission, Runs great, factory A/C Price is $22,000 https://www.facebook.com/marketplace...2-6691bb8f7618

[Wikid61]

https://www.facebook.com/marketplace...98249728%22%7D

[Wikid61]

69 c10 short/wide. 6 cyl/3 speed manual. Needs rockers. corners, door bottoms, kick panels and windshield. Yard drives. New brakes. Good Ky. title. A lot of new LMC parts included. Lost interest.....Not really interested in trades, but I'll listen. https://www.facebook.com/marketplace...3A123%7D%22%7D

[Wikid61]

1968 c10 350 automatic longbed. It's not perfect but not rusted out either. Little rust under the doors. Needs some brake work to be a daily. It's a nice enough truck it could be restored or turned into a rat rod, or drive as is. No major leaks, windows need work to roll up and down. Brakes need work, haven't messed with the stereo but everything is there to get it working. No clue on actual mileage. Will consider fun trades Corvette, 350z, GTO, ect. Could include cash on my side for the right trade. https://www.facebook.com/marketplace...7-d53eba790860

[Wikid61]

1/2 ton 4 x 4 pickup with hydraulic round bale unroller. 6,853 miles on 2nd pickup engine. Will carry two 800# bales. Selling as a unit. $6,000 OBO. https://www.facebook.com/marketplace...7-d53eba790860

[Wikid61]

$4,000. https://www.facebook.com/marketplace...7-d53eba790860

[Carl Spangler]

Originally Posted by Wikid61

1971 C-10 Cheyenne pickup. One family owned since 1976. 350 2 barrel carb. Automatic transmission, Runs great, factory A/C Price is $22,000 https://www.facebook.com/marketplace...2-6691bb8f7618

That looks like a pretty nice C10. Perhaps a rose in a field of thorns.