What did you do to your truck today? Chapter II - Page 49 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

colgad · 12-03-2014, 08:01 PM

Added hub cap and a bow tie to the hub cap.
It took longer than expected.

**Elliot949** · 12-03-2014, 08:53 PM

Quote:

Originally Posted by colgad

Added hub cap and a bow tie to the hub cap.
It took longer than expected.

This is just to fricking cool...

colgad · 12-03-2014, 09:57 PM

Quote:

Originally Posted by Elliot949

This is just to fricking cool...

Should be plenty of C50's in Kansas! Just cut the frame behind the cab and add a Topkick rear frame and shorten a 10lug front axle drop it in. And you'll be driving one!
Brake lines are next for me then paint.
Thanks!

**Elliot949** · 12-03-2014, 10:02 PM

Quote:

Originally Posted by colgad

Should be plenty of C50's in Kansas! Just cut the frame behind the cab and add a Topkick rear frame and shorten a 10lug front axle drop it in. And you'll be driving one!
Brake lines are next for me then paint.
Thanks!

Lol... I still have a C-20/C-10 to finish...

rydeordie · 12-03-2014, 09:42 PM

Quote:

Originally Posted by colgad

Added hub cap and a bow tie to the hub cap.
It took longer than expected.

Man I would love to drive that thing around in my area.

73737373 · 12-04-2014, 12:15 PM

I agree on the disc v. drum issue. Why would GM design a vehicle that would not stop properly??? Added PB to my 68 shorty and it stops just as I'd like it to.

texasld · 12-05-2014, 03:12 PM

Just a little rust repair!

Sure do wish these patches fit a bit better.

barmanvarn · 12-05-2014, 11:30 PM

Did a temp primer/paint job on another rusty wheel off the truck. 2 down, 3 to go.

**Bob B.** · 12-06-2014, 03:50 AM

Used the '67 to pick up a Christmas tree! V-6 had no problems hauling it home.

colgad · 12-06-2014, 08:40 AM

Quote:

Originally Posted by Bob B.

Used the '67 to pick up a Christmas tree! V-6 had no problems hauling it home.

Good to hear trucks being used for hauling stuff for the family!

zamboni2354 · 12-06-2014, 09:35 AM

Installed new headers and sparkplug wires

Started working on a little rust area

Almost done with it.

Had the exhaust installed

Hoping to get the cab back on the frame soon.

Jeff in long beach

**70cst** · 12-06-2014, 11:26 AM

I brought my truck home.

Lees68GMC · 12-06-2014, 03:32 PM

Had a Great Day, had my nasty old bed media blasted, then Tim spray urethane primed it. The majority of my truck is original paint with some spray bombed areas but, as you can see from the Before and After shots, the bed was just too nasty in comparison to the rest of the truck now for my taste.

ole dollor · 12-07-2014, 09:05 PM

Quote:

Originally Posted by Lees68GMC

Had a Great Day, had my nasty old bed media blasted, then Tim spray urethane primed it. The majority of my truck is original paint with some spray bombed areas but, as you can see from the Before and After shots, the bed was just too nasty in comparison to the rest of the truck now for my taste.

that bed looks real good, came out real nice...

tinsoldier · 12-06-2014, 04:07 PM

Finally got around and installed a Holley Projection 2d that I picked up from Craigslist a while back. I am so glad that I did. I was getting tired of the old Rochester that had a broken choke, constantly thirsty for gas, would dies at the red light, and over all piece of #$%$#^ technology.

The installation was not that bad. I did buy a O2 sensor to make it into a close loop. Holley is definitely making a killing at the throttle brackets and all the accessories to go with the installation. Had to buy all new bracket to get the geometry right for the 700r4 cable.
Video of the first start after installation below.

http://vid123.photobucket.com/albums...pszyrdbwhf.mp4

barmanvarn · 12-12-2014, 06:34 PM

I'm not doing the "cool" stuff yet but today at least I managed to replace the old truck cover with a new one from LMC.

Man, that think fits like a glove. Am very pleased with it.

sorry, no pics.

texjake · 12-13-2014, 10:18 PM

I got rid of the old Quadrajunk & installed a new Holley Street Avenger 670cfm carburetor today. It sure runs better too. I changed out the jets from 65 primaries & 68 secondaries to 68 primaries & 72 secondaries. I did this hearing that those Street Avenger carbs run on the lean side with the factory jets.

Possmguts · 12-13-2014, 11:07 PM

sanded a bit more on the cab is all... this part sucks

**Elliot949** · 12-13-2014, 11:19 PM

I walked out to the garage and set on a chair and looked at it...

dirtyjim · 12-14-2014, 08:39 PM

installed drop spindles and discs on the 67

Possmguts · 12-14-2014, 08:51 PM

Quote:

Originally Posted by dirtyjim

installed drop spindles and discs on the 67

2.5" drop? I would love to see what the stance is with wheels and tires.

Possmguts · 12-14-2014, 08:52 PM

.... more sanding....

dirtyjim · 12-15-2014, 12:09 AM

Quote:

Originally Posted by Possmguts

2.5" drop? I would love to see what the stance is with wheels and tires.

it has front coils from a late 80's suburban with a little over one coil cut.
front tires are 275/45r20, back still needs to come down 2" but I can live with a little rake for now.

slowcpe · 12-14-2014, 09:31 PM

Got my PB crossmembers in and mocked up my Boyd tank.

Name: image.jpg
Views: 915
Size: 46.1 KB

hamjet · 12-14-2014, 10:52 PM

Nothing to the truck, but I did get it a new lease on life. will be rebuilding it in the spring. 348 W engine

12-03-2014, 08:01 PM	#1
colgad Registered User Join Date: Jun 2006 Location: Lutz, Florida Posts: 838	Re: What did you do to your truck today? Chapter II Added hub cap and a bow tie to the hub cap. It took longer than expected. Attached Images __________________ 1967 Red, C10 Short Bed 6.0L T5 5 speed 1967 Orange and Black C50 6.2 Detroit Diesel NV4500, 2 Ton Pickup 1972 White, Chevy Blazer 2WD 67 Dog house 5.3 4L65 2016 Power Tour LH 1955 Red-Cream, Chevrolet Nomad, restoration on hold 2004 Black, Corvette Z06 LS6 convertible (Rock solid Fun) 2011/2018 Power Tour

12-04-2014, 12:15 PM	#6
73737373 Registered User Join Date: Sep 2005 Location: Oklahoma USA Posts: 1,000	Re: What did you do to your truck today? Chapter II I agree on the disc v. drum issue. Why would GM design a vehicle that would not stop properly??? Added PB to my 68 shorty and it stops just as I'd like it to.

12-05-2014, 03:12 PM	#7
texasld Registered User Join Date: Dec 2013 Location: Wilmot, NH Posts: 443	Re: What did you do to your truck today? Chapter II Just a little rust repair! Sure do wish these patches fit a bit better. __________________ 1969 C10 SWB 5.3L LS, 4l60e, 2/4 drop (In Progress) 2015 GMC 2500 Duramax (Daily Driver) 1999 Jeep TJ 2010 Harley Street Glide Check Out My Build!: http://67-72chevytrucks.com/vboard/s...d.php?t=617981

12-05-2014, 11:30 PM	#8
barmanvarn Registered User Join Date: Nov 2014 Location: Sherwood, AR Posts: 189	Re: What did you do to your truck today? Chapter II Did a temp primer/paint job on another rusty wheel off the truck. 2 down, 3 to go. __________________ Brian '69 GMC C15 Inline 6, 230ci (possibly 250ci)

12-06-2014, 03:50 AM	#9
Bob B. Senior Member Join Date: Aug 2005 Location: Los Angeles Posts: 1,348	Re: What did you do to your truck today? Chapter II Used the '67 to pick up a Christmas tree! V-6 had no problems hauling it home. __________________ 1967 GMC CM-2500 Camper Cruiser, 351E V-6, NP 435 4 speed, Dana 60, and factory A/C. 2012 GMC K-3500 WT regular cab, 6.0L Vortec, 6L90.

12-06-2014, 09:35 AM	#11
zamboni2354 Registered User Join Date: Mar 2014 Location: Long Beach, CA. Posts: 289	Re: What did you do to your truck today? Chapter II Installed new headers and sparkplug wires Started working on a little rust area Almost done with it. Had the exhaust installed Hoping to get the cab back on the frame soon. Jeff in long beach

12-06-2014, 11:26 AM	#12
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,373	Re: What did you do to your truck today? Chapter II I brought my truck home. Attached Images __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-06-2014, 03:32 PM	#13
Lees68GMC Registered User Join Date: Jul 2013 Location: Prescott Arizona Posts: 343	Re: What did you do to your truck today? Chapter II Had a Great Day, had my nasty old bed media blasted, then Tim spray urethane primed it. The majority of my truck is original paint with some spray bombed areas but, as you can see from the Before and After shots, the bed was just too nasty in comparison to the rest of the truck now for my taste. Attached Images __________________ 68 GMC SWB Vortec 5.3 98 Chevy Blazer ZR2 94 Mazda Miata, LS2 6 speed, sold "No matter what happens, nobody gets out alive"

12-06-2014, 04:07 PM	#15
tinsoldier Registered User Join Date: Mar 2013 Location: Peachtree Corners, GA Posts: 84	Re: What did you do to your truck today? Chapter II Finally got around and installed a Holley Projection 2d that I picked up from Craigslist a while back. I am so glad that I did. I was getting tired of the old Rochester that had a broken choke, constantly thirsty for gas, would dies at the red light, and over all piece of #$%$#^ technology. The installation was not that bad. I did buy a O2 sensor to make it into a close loop. Holley is definitely making a killing at the throttle brackets and all the accessories to go with the installation. Had to buy all new bracket to get the geometry right for the 700r4 cable. Video of the first start after installation below. http://vid123.photobucket.com/albums...pszyrdbwhf.mp4 Last edited by tinsoldier; 12-06-2014 at 04:12 PM.

12-12-2014, 06:34 PM	#16
barmanvarn Registered User Join Date: Nov 2014 Location: Sherwood, AR Posts: 189	Re: What did you do to your truck today? Chapter II I'm not doing the "cool" stuff yet but today at least I managed to replace the old truck cover with a new one from LMC. Man, that think fits like a glove. Am very pleased with it. sorry, no pics. __________________ Brian '69 GMC C15 Inline 6, 230ci (possibly 250ci)

12-13-2014, 10:18 PM	#17
texjake Registered User Join Date: Nov 2013 Location: Lubbock, TX Posts: 283	Re: What did you do to your truck today? Chapter II I got rid of the old Quadrajunk & installed a new Holley Street Avenger 670cfm carburetor today. It sure runs better too. I changed out the jets from 65 primaries & 68 secondaries to 68 primaries & 72 secondaries. I did this hearing that those Street Avenger carbs run on the lean side with the factory jets. Attached Images __________________ "Now all I need is a shop to go with my shop vac!"

12-13-2014, 11:07 PM	#18
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II sanded a bit more on the cab is all... this part sucks __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8

12-13-2014, 11:19 PM	#19
Elliot949 Registered User Join Date: Sep 2010 Location: Winfield, Ks. Posts: 4,162	Re: What did you do to your truck today? Chapter II I walked out to the garage and set on a chair and looked at it... __________________ Dan Johnston... Owner of My Dad's- '67 Chevy C-20 Custom Camper Short Fleetside Pickup PAPA J And our newest addition a- '71 Chevy CST/10 Short Fleetside Pickup Haulin' SOLD Papa J's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=612847 Haulin's Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=671130SOLD B Bears Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=744210

12-14-2014, 08:39 PM	#20
dirtyjim Registered User Join Date: Feb 2013 Location: alvin, texas Posts: 622	Re: What did you do to your truck today? Chapter II installed drop spindles and discs on the 67 __________________ 1967 C10 lwb two tone, 305 & rat fink style floor shifted 700r4, 20" steelies 2004 2500HD utility bed aka Brutus

12-14-2014, 08:52 PM	#22
Possmguts Registered User Join Date: Nov 2014 Location: Columbiana Ohio Posts: 1,210	Re: What did you do to your truck today? Chapter II .... more sanding.... __________________ "Hey... its only time and money right? Just do it." 67 Short Bed under major construction http://67-72chevytrucks.com/vboard/s...=651356&page=8



Register or Log In To remove these advertisements.

12-14-2014, 09:31 PM	#24
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: What did you do to your truck today? Chapter II Got my PB crossmembers in and mocked up my Boyd tank. __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

12-14-2014, 10:52 PM	#25
hamjet Registered User Join Date: Apr 2013 Location: South Westerlo, New York Posts: 1,325	Re: What did you do to your truck today? Chapter II Nothing to the truck, but I did get it a new lease on life. will be rebuilding it in the spring. 348 W engine Attached Images __________________ Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.

Register or Log In To remove these advertisements.