![]() |
![]() |
#1201 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: What did you do with your truck today, Part 3
Whew, I was dangerously close to going over my 5-minute limit today. Funny how that "5 minute" thing has become my max
![]() I've been waiting on a set of hood bolts. When they arrived I was dismayed to find that the spring bolts were fine thread, while the receptacles in my hood are coarse thread. WTH - are the bolts wrong or has someone changed the threads in my spring bolt holes? The hood spring threads were solid so I converted standard coarse thread bolts into shoulder bolts by adding a shim made from a piece of 3/8" fuel line. They should work exactly like real shoulder bolts. Tomorrow, mount the hood!
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#1202 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
So tonight it was odd, I drove home a Tesla and took my family out so everyone could drive it. I just let them drive as they wanted, omg we drove all over the city, about 25 miles! My wife, omg it was so cute, she is very conservative not a hot rodder. But she nailed it and throughout her whole time driving she kept hitting the throttle. LOL But it was so much fun, we came home, I got out to the garage and did my five minutes. A few welds, a few grinds, did a little test with my wire wheel and grinder on the floor to see if it would get it good enough for primer. HELL YEAH it did, better than I thought it would. I will get the inside all primed this weekend, right on!
Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1203 | |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
Quote:
![]() Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
|
![]() |
![]() |
![]() |
#1204 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: What did you do with your truck today, Part 3
I can't imagine the difficulty level of that.
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#1205 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: What did you do with your truck today, Part 3
With my home-made hood carriage and the help of my wife, I was able to get the hood installed with no collateral damage. In my excitement however, I forgot to clean and paint the inside of the hood before installation, so that will have to be done the hard way later.
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#1206 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
I got out there and cleaned up behind the garage so I can put the cab out there to sand blast on it. Tired of covering my lawn with sand. I also got my extra roof in the trailer to haul it to the shop scrap metal bin. I cut a few pieces from the roof and from the inside of the extra inner panel to see if I could use it on the lower corners on the inside of the cab, but nope, forget it, they are off to the scrap metal bin.
Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1207 |
Registered User
Join Date: Jun 2017
Location: upper midwest
Posts: 1,129
|
Re: What did you do with your truck today, Part 3
Finished breaking down the truck for paint, it's off to the paint shop tomorrow after work...
|
![]() |
![]() |
![]() |
#1208 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
I am beat today, just so hard, but got out there for my five minutes, did a little rust cleaning under the dash getting it ready for primer.
Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1209 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: What did you do with your truck today, Part 3
I got an early birthday present!
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#1210 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
Just remember the basics, I have this up on my wall so I don't forget.
![]() No, honestly, that manual can be VERY valuable. You have to hear a story, sorry. ![]() I never even looked at one for years and years, decades. I always thought those were for dummies who didn't have all the car knowledge I did, those were for people who didn't know what they were doing and had to be told like a child. I honestly thought this, I never conscientiously thought it, but in me that is what I was thinking, and I simply never touched one. Those books were for mechanical stuff to look up engine timing and head bolt torque, that was about it, NOT for anything to do with body, geeez. Then I got my Rambler, and my brother moved out of the area (my mechanic.) I knew NOTHING about this car, first one in my life that I didn't know how many years they used that motor, or what other models used those brakes, that sort of stuff, I didn't even know how many years the body parts exchanged with, I knew nothing. This was VERY unlike anything I had ever owned. So I got manuals for it, OMG this solved a lot of problems working with the doors, stuff was just goofy different and OMG now I found I was pulling out the manuals on my Gran Sport too, my brother bought me these, I sure wouldn't have. One day I was having a hell of a time putting the door glass in, I pulled the manual and wham done deal! No, I was a moron, they CAN be very valuable, and actually kinda fun as they put you there in the factory or in the repair shop in 1950. I enjoy being in that repair shop in 1950. Brian ![]()
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1211 |
Registered User
![]() Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
|
Re: What did you do with your truck today, Part 3
Wired up the ignition and installed. That about wraps up this evening.
|
![]() |
![]() |
![]() |
#1212 |
Registered User
Join Date: Mar 2013
Location: albuquerque New Mexico
Posts: 522
|
Re: What did you do with your truck today, Part 3
|
![]() |
![]() |
![]() |
#1213 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
I thought I was done with all the welding and metal work on the cab.
![]() I was starting the cleaning up under the dash and all to get the primer shot and I saw this, crap, I will get it fixed tomorrow. Tell me guys, on this AD you can see that there are three holes in the gas pedal bracket, what the hell are those holes there for? The bracket is welded to the floor, why would those holes be there? Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1214 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
Being I am not working today to go to my co-workers funeral I got out into the garage for a little work. I am not kidding you, he was a car guy, he loved my truck and would have been building something like this if he could have, being his money and house situation it was a no go. I figured it wasn't disrespectful but quite the opposite go get out there and work on it for him today.
I got the firewall spot blasted using my little "Speedblaster." Clamped a piece of metal on the hole so I wouldn't be blowing sand all over the garage, worked like a charm. I then blasted the piece that gets welded on, yes it was wasted. Then made a piece to replace the rusted area. And gas welded it together. And the last photo is of Martin, good bye buddy. Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1215 |
Registered User
Join Date: Sep 2014
Location: USA
Posts: 2,249
|
Re: What did you do with your truck today, Part 3
What happened that he died so young? And BTW, has your face healed from your drill mishap?
I debated about filling the factory holes in the inner fenders because I want an "old truck" look, not a smoothie street rod look. But I finally decided that, since I will be driving it in all weather, I don't want water entering the engine compartment through all those holes. So today was spent filling holes, clearancing the lower aprons around my Mustang control arms, and hammering all the edges straight. Unfortunately, the previous owner had nicely painted the skirts, so it ruined the paint job. I will rattle-can them when I'm done.
__________________
1951 Chevy Panel Truck |
![]() |
![]() |
![]() |
#1216 | |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
Quote:
![]() My face never regained the feeling, I have a triangle shape from right eye to lip that is semi numb. Upon touching it, I get a tingly feeling. It sucks but I am thrilled that is all that happened! Believe me, I feel blessed I have this reminder of how blessed I am. I made a key chain out of the very drill bit that did it as a reminder. Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
|
![]() |
![]() |
![]() |
#1217 |
Registered User
![]() Join Date: Oct 2011
Location: Tucson, AZ
Posts: 639
|
Re: What did you do with your truck today, Part 3
Sander, prepped and sealed the floor board. Tomorrow comes sound/heat material and carpet.
Man, old trucks sure now how to waist a weekend. For some reason we still keep at it. |
![]() |
![]() |
![]() |
#1218 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
I spent 5 hours driving to get my seat does that count for working on my truck? My wife went with me as it was my wedding anniversary present.
![]() Anyway, thank you so much iowaboynca for the opportunity to get this seat, it's just what I needed to move another step forward. And seeing your truck was cool, thanks again. I got the seat in the cab for the first time and see that I need some serious mods, I knew I would but was hoping I wouldn't. But it's all good, I will section the back of the seat down out of the window view, make foam pads instead of the springs and it will be perfect. I also got the hole welded into the firewall for the brake pedal and tomorrow will weld the top piece in finishing that. Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1219 |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
If you know me, you know I had to shoot a reenactment the minute I got home with my new seat.
![]() Brian
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
![]() |
![]() |
![]() |
#1220 |
Senior Member
![]() Join Date: Jul 2009
Location: Tomball, Texas
Posts: 1,592
|
Re: What did you do with your truck today, Part 3
That's pretty cool Brian. It's been fun watching your excitement grow for your build as you get your cab closer and closer to primer!
__________________
Rick 78 GMC K15 SWB, 350/NV4500/NP205/4.10s Project Hazel 71 GMC C25 350/TH400 - Project Angie 59 Chevy SWB Stepside (next in line? Not sure now ![]() 2001 GMC Sierra K2500 |
![]() |
![]() |
![]() |
#1221 |
Registered User
Join Date: Mar 2013
Location: albuquerque New Mexico
Posts: 522
|
Re: What did you do with your truck today, Part 3
picked up my parts truck yesterday. it was a long 9 hours round trip the truck has a lot of usable parts. none of them perfect. I was surprised that the motor looks complete minus oil bath breather.
|
![]() |
![]() |
![]() |
#1222 |
Registered User
Join Date: Mar 2013
Location: albuquerque New Mexico
Posts: 522
|
Re: What did you do with your truck today, Part 3
|
![]() |
![]() |
![]() |
#1223 |
Registered User
Join Date: Aug 2016
Location: Hunkered Down
Posts: 1,837
|
Re: What did you do with your truck today, Part 3
Curios about the interesting unloading method.
|
![]() |
![]() |
![]() |
#1224 |
Registered User
Join Date: Jul 2017
Location: Lebanon, Oregon
Posts: 241
|
Re: What did you do with your truck today, Part 3
Super cool parts rig. I'd get it just for the bumper brackets, then place it in the front yard as a piece of art.
__________________
It was said that if you cut off one hydra head, two more grow back. -Lernaean Hydra Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=743246 |
![]() |
![]() |
![]() |
#1225 | |
Registered User
Join Date: Dec 2000
Location: Boise, Idaho
Posts: 6,003
|
Re: What did you do with your truck today, Part 3
Quote:
Brian ![]()
__________________
1948 Chevy pickup Chopped, Sectioned, 1953 Corvette 235 powered. Once was even 401 Buick mid engined with the carburetor right between the seats! Bought with paper route money in 1973 when I was 15. "Fan of most anything that moves human beings" |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|