1969 SuperBurb build-up (Bagged and Blown!) - Page 49 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 08-08-2012, 08:42 AM

love the new gauges, I sure do want a set of those DDs

**thelonerife** · 08-09-2012, 12:00 AM

Cool Burb!! Makes me want paint on mine lol.

**Hart_Rod** · 08-18-2012, 10:44 AM

Quote:

Originally Posted by jbclassix

Oh man! Those A/C controls are incredible! I could hide those behind the ash tray door!

I've already got a slot cut out for them where the factory ones used to mount. It should go well with the gauges.

Quote:

Originally Posted by 67cheby

man....that looks great cant wait !! mine mailed out Friday !!

Thanks!

Quote:

Originally Posted by jmedero

Hey rob put the shovel down, stop digging and start filling that hole. Lol

The pot calling the kettle black.
Posted via Mobile Device

Quote:

Originally Posted by killer71

Ya, I hear ya! I'm diggin the cluster...gonna be one sweet burb!
Posted via Mobile Device

Thanks!

Quote:

Originally Posted by BucksSS

They really look right at home, nice choice.

Thanks Ernie!

Quote:

Originally Posted by CLTBurban

One word Rob; WOW!!! You nailed it bro! New age technology meets old school class! Nicely done.

Quote:

Originally Posted by Erick Barnett

Nice

Thanks!

Quote:

Originally Posted by BB72CHEVKT

another nice addition to one sweet ride

Thanks!

Quote:

Originally Posted by mcbassin

love the new gauges, I sure do want a set of those DDs

You'll really like them!

Quote:

Originally Posted by Nick230

I just read through the whole build, amazing job you have done. I have to go and pick my jaw up from off floor now!

Nick

Thanks for taking the time to read through it all Nick, I'm humbled.

Quote:

Originally Posted by thelonerife

Cool Burb!! Makes me want paint on mine lol.

Get going!!!

***

No real visual progress, but I spent all of last weekend trying to remember where I had stopped on the wiring. Here's a small piece of advice to everyone, once you start wiring, you should never stop!!! And make lots of notes and label your wires (especially if you are using them for something different than they were intended for..). This will come in handy if you are integrating a lot of different electronics systems such as - air ride management, electronic gauges, body harness, a/c, EFI, Supercharger, electric fans, ....

,

.

Anyways, I'm about back to where I left off a year or so ago. Now I'm just trying to figure out the mounting locations of a few pieces such as the PCM and the water reservoir for the Maggie supercharger. If you guys have any suggestions let me know and post pictures. As of right now, I'm going to mount the PCM on the passenger inner fender. It's not to sexy, but it works with the wire bundle and won't require me to redo the wiring.

I also picked up a sponsor for the 2013 Power Tour. Tony at Entropy radiators has really helped me out and he build a really cool product. Hopefully, I'll be able to pick up a couple of more to help me finish this beast!

NPilot1975 · 08-18-2012, 01:14 PM

Saw the burb in person yesterday and the pix do not do it justice! It is beautiful and makes me want to make more progress on mine.
Posted via Mobile Device

jmedero · 08-18-2012, 02:02 PM

It truly is a nice truck. Very quality all around.
Posted via Mobile Device

**Hart_Rod** · 08-20-2012, 07:24 PM

Quote:

Originally Posted by NPilot1975

Saw the burb in person yesterday and the pix do not do it justice! It is beautiful and makes me want to make more progress on mine.
Posted via Mobile Device

Quote:

Originally Posted by jmedero

It truly is a nice truck. Very quality all around.
Posted via Mobile Device

Thanks guys! I got the reservoir and water pump mounted for the supercharger intercooler. Now I just need to get some bulkhead fittings to help clean the way it looks. Also, can someone with a 71 or 72 clip post me some pictures of how the factory ac condenser is mounted? I'm trying to figure out how I'm going to install the intercooler up front. Thanks in advance.

**superflysteiny** · 08-21-2012, 02:16 PM

love this sub I have been watching this for a while now. Cant wait to see her finished

*project 67 sub* · 08-21-2012, 11:45 PM

lookin super sick Rob, keep up the good work

**Hart_Rod** · 08-22-2012, 09:23 AM

Quote:

Originally Posted by superflysteiny

love this sub I have been watching this for a while now. Cant wait to see her finished

Thanks SF! Everytime I need some motivation, I slip over and take a look at your progress and creativtiy. Maybe be we'll be able to meet up at the PowerTour.....

.

Quote:

Originally Posted by project 67 sub

lookin super sick Rob, keep up the good work

Thanks! Looks like yours is coming along nicely also.

R/

*project 67 sub* · 08-22-2012, 10:22 PM

no probem bro, its much deserved for all your hard work

and thanks, yah mines getting their sloooowly lol, but at least any progress is better than none even if its at snail speed sometimes.
Posted via Mobile Device

**superflysteiny** · 08-23-2012, 12:32 AM

Thanks man, I hope we do get a chance to meet up
Posted via Mobile Device

kikkegek · 08-31-2012, 03:36 PM

sweet build and a deep bow for all the rust repair man! RESPECT!

smokinstang70 · 08-31-2012, 09:04 PM

Rob... I have the same motor and supercharger setup for my 71 truck. I was wondering what cam you went with. I know I want to swap the cam... Just not sure what specs I want. Any advice will we greatly appreciated. Build is amazing by the way... Keep it up.
Posted via Mobile Device

**Hart_Rod** · 09-01-2012, 10:19 AM

Quote:

Originally Posted by kikkegek

sweet build and a deep bow for all the rust repair man! RESPECT!

Thanks!!

Quote:

Originally Posted by smokinstang70

Rob... I have the same motor and supercharger setup for my 71 truck. I was wondering what cam you went with. I know I want to swap the cam... Just not sure what specs I want. Any advice will we greatly appreciated. Build is amazing by the way... Keep it up.
Posted via Mobile Device

Smoke, I didn't do anything to the motor. It only has 10 mile on it and I plan on driving the suburban cross country, so drivability and dependability are my main focus. Now, my 68 SWB will be a different story.....

Posted via Mobile Device

1low70 · 09-20-2012, 12:21 AM

Man your burb looks SWEET! nice and low!

ill bet that thing will drive like a dream.

and I belive the factory ac condenser is just mounted in front of the radiator.. i can go check my dads truck that has ac if you like?

**Hart_Rod** · 10-08-2012, 04:05 PM

Quote:

Originally Posted by 1low70

Man your burb looks SWEET! nice and low!

ill bet that thing will drive like a dream.

and I belive the factory ac condenser is just mounted in front of the radiator.. i can go check my dads truck that has ac if you like?

Thanks 1Low, I just got my a/c stuff in from Vintage Air (a big THANK YOU to Brando Ott for helping me figure all the pieces out!!) and have it figured out now. Now I need to get an inner cooler that will work with the space I have up front. Here are some pictures.

**Hart_Rod** · 10-08-2012, 05:42 PM

More pictures....

6772owner · 10-09-2012, 09:25 AM

This Burb is so awesome, cant wait to hear a video of that blower howling away!

hgs_notes · 10-09-2012, 06:00 PM

Looking good.

**superflysteiny** · 10-09-2012, 06:48 PM

Looken good cant wait to see it finished

chevytruckluver · 10-09-2012, 08:47 PM

Looks great Rob, as usual...
Hey any chance you can take a pic of the a/c condensor from straight in front and then another from the back that would show the lines and how they pass thru the core support?
Thanks

**68 Four on the Floor** · 10-12-2012, 08:46 PM

Hey i think you forgot to hang the fenders........

jeffg1010 · 10-22-2012, 09:18 AM

No pressure or anything, but once you factor in travel time, we've only got about 219 days until the Power Tour. We need updates!

Number98 · 10-24-2012, 11:16 PM

She is really looking good Rob!

**Hart_Rod** · 10-31-2012, 10:13 PM

Quote:

Originally Posted by 6772owner

This Burb is so awesome, cant wait to hear a video of that blower howling away!

Thanks!

Quote:

Originally Posted by hgs_notes

Looking good.

Thanks!

Quote:

Originally Posted by superflysteiny

Looken good cant wait to see it finished

Thanks!

Quote:

Originally Posted by chevytruckluver

Looks great Rob, as usual...
Hey any chance you can take a pic of the a/c condensor from straight in front and then another from the back that would show the lines and how they pass thru the core support?
Thanks

Thanks! PM me if you still need this picture.

Quote:

Originally Posted by sunk99

Great looking burb, mine is in the metal shop now and yours is geat inspiration for me. Keep it up!

Thanks!

Quote:

Originally Posted by 68 Four on the Floor

Hey i think you forgot to hang the fenders........

Quote:

Originally Posted by jeffg1010

No pressure or anything, but once you factor in travel time, we've only got about 219 days until the Power Tour. We need updates!

Your killin me!!!

Quote:

Originally Posted by Number98

She is really looking good Rob!

Thanks Jason. Looking forward to seeing what you will do with the 70...

Small update. I finally got all of my A/C pieces in and have been trying to get everything fitted. I went with a Gen IV setup from Vintage Air (thanks Brandon!) and I'm using a Dakota Digital controller that I got from Pro Performance (thanks Travis!). Here's a couple of snapshots of the vents, controller and gauges! Hopefully I will get the Gen IV unit installed this weekend.

08-08-2012, 08:42 AM	#1
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: 1969 SuperBurb build-up (Bagged and Blown!) love the new gauges, I sure do want a set of those DDs __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

08-09-2012, 12:00 AM	#2
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: 1969 SuperBurb build-up (Bagged and Blown!) Cool Burb!! Makes me want paint on mine lol. __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

08-18-2012, 01:14 PM	#4
NPilot1975 Senior Member Join Date: Aug 2002 Location: Plymouth, MA Posts: 891	Re: 1969 SuperBurb build-up (Bagged and Blown!) Saw the burb in person yesterday and the pix do not do it justice! It is beautiful and makes me want to make more progress on mine. Posted via Mobile Device __________________ 1972 Blazer body...need to get a thread started for the rest of the story

08-18-2012, 02:02 PM	#5
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 1969 SuperBurb build-up (Bagged and Blown!) It truly is a nice truck. Very quality all around. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

08-21-2012, 02:16 PM	#7
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1969 SuperBurb build-up (Bagged and Blown!) love this sub I have been watching this for a while now. Cant wait to see her finished __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

08-21-2012, 11:45 PM	#8
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1969 SuperBurb build-up (Bagged and Blown!) lookin super sick Rob, keep up the good work

08-22-2012, 10:22 PM	#10
project 67 sub Account Suspended Join Date: Mar 2007 Location: san bernardino ca. everywhere Posts: 3,938	Re: 1969 SuperBurb build-up (Bagged and Blown!) no probem bro, its much deserved for all your hard work and thanks, yah mines getting their sloooowly lol, but at least any progress is better than none even if its at snail speed sometimes. Posted via Mobile Device

08-23-2012, 12:32 AM	#11
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1969 SuperBurb build-up (Bagged and Blown!) Thanks man, I hope we do get a chance to meet up Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

08-31-2012, 03:36 PM	#12
kikkegek Registered User Join Date: Aug 2010 Location: Netherlands, The Hague Posts: 1,518	Re: 1969 SuperBurb build-up (Bagged and Blown!) sweet build and a deep bow for all the rust repair man! RESPECT! __________________ My dreamride / project:1977 GMC C15 Suburban In storage: Monster - 1974 GMC Suburban 25hundred Sold : Chevrolet Suburban K20 Silverado 1986 Guide: real HID projectors for 4x6 headlights link: DIY LED TAILLIGHTS

08-31-2012, 09:04 PM	#13
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: 1969 SuperBurb build-up (Bagged and Blown!) Rob... I have the same motor and supercharger setup for my 71 truck. I was wondering what cam you went with. I know I want to swap the cam... Just not sure what specs I want. Any advice will we greatly appreciated. Build is amazing by the way... Keep it up. Posted via Mobile Device __________________ "Love Affair" Build Thread

09-20-2012, 12:21 AM	#15
1low70 Registered User Join Date: Mar 2009 Location: Maryville MO Posts: 9	Re: 1969 SuperBurb build-up (Bagged and Blown!) Man your burb looks SWEET! nice and low! ill bet that thing will drive like a dream. and I belive the factory ac condenser is just mounted in front of the radiator.. i can go check my dads truck that has ac if you like? __________________ chopped blazer, chopped 70 truck, chopped 67 truck, and 68 gmc.

10-08-2012, 05:42 PM	#17
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: 1969 SuperBurb build-up (Bagged and Blown!) More pictures.... Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

10-09-2012, 09:25 AM	#18
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: 1969 SuperBurb build-up (Bagged and Blown!) This Burb is so awesome, cant wait to hear a video of that blower howling away! __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644

10-09-2012, 06:00 PM	#19
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,126	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looking good. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

10-09-2012, 06:48 PM	#20
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looken good cant wait to see it finished __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell



Register or Log In To remove these advertisements.

10-09-2012, 08:47 PM	#21
chevytruckluver Eat, Sleep, Drive a Chevy Join Date: Apr 2010 Location: the town of the cow, Texas Posts: 1,152	Re: 1969 SuperBurb build-up (Bagged and Blown!) Looks great Rob, as usual... Hey any chance you can take a pic of the a/c condensor from straight in front and then another from the back that would show the lines and how they pass thru the core support? Thanks __________________ Trey Silence may be Golden, but Duct Tape is Silver! 72 Short Step 57 "big window" short step

10-12-2012, 08:46 PM	#22
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: 1969 SuperBurb build-up (Bagged and Blown!) Hey i think you forgot to hang the fenders........

10-22-2012, 09:18 AM	#23
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,676	Re: 1969 SuperBurb build-up (Bagged and Blown!) No pressure or anything, but once you factor in travel time, we've only got about 219 days until the Power Tour. We need updates! __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

10-24-2012, 11:16 PM	#24
Number98 Prestige Worldwide Join Date: Feb 2001 Location: Worldwide Posts: 2,553	Re: 1969 SuperBurb build-up (Bagged and Blown!) She is really looking good Rob!

Register or Log In To remove these advertisements.