1963 C-10 in NC - Page 49 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**pimpston65** · 08-20-2014, 03:05 PM

Quote:

Originally Posted by pimpston65

looking good sir!!!

are both your builds manuals? cuz i have an extra clutch delete plug if you need one.

1963c-10 · 08-20-2014, 04:04 PM

Quote:

Originally Posted by pimpston65

are both your builds manuals? cuz i have an extra clutch delete plug if you need one.

Clutch delete plug? Never heard of it. Stepside is a manual, fleetside will be an auto.

aggie91 · 08-20-2014, 04:20 PM

I think he is talking about the plug that goes in the hole that the clutch linkage passes thru on the firewall to the Z bar.

Trucks are looking good.

1963c-10 · 08-20-2014, 04:44 PM

Yeah....I could definitely use one. I was going to weld it up, but I'd rather have the plug.

1963c-10 · 08-21-2014, 09:07 AM

Got the glass removed last night with help from Austin. Pinch welds all look great. Some light surface rust on the lower corners, but not rot or pinholes...and nothing the wire brush didn't take off. Should be able to finish prep on windshield opening....tape off and primer the rest of the interior tonight. MY goal at least. Hoping to get color down over the next weekend and start reassembly. Then back onto engine/trans.

1963c-10 · 08-23-2014, 02:19 PM

Got seam sealer down last night. 2 coats sealer and 2 coats base so far. Need 1 more coat base and then clear

Ta2Don · 08-23-2014, 03:11 PM

Diggin' the Blue!!!

1963c-10 · 08-23-2014, 03:22 PM

Up to 3 coats color..1 clear

1963c-10 · 08-23-2014, 03:23 PM

Quote:

Originally Posted by Ta2Don

Diggin' the Blue!!!

Thanks don. Its early 60's pepsi fleet blue

**pimpston65** · 08-23-2014, 03:44 PM

Quote:

Originally Posted by 1963c-10

Thanks don. Its early 60's pepsi fleet blue

sorry dude i missed the postoffice drop off, they closed on me. so ima send those delete plugs on monday. paint should be dry by the time you get em...

1963c-10 · 08-23-2014, 03:54 PM

No problem.

Last coat clear down. Came out great.

TJ's Chevy · 08-23-2014, 04:55 PM

DANG!!! Looks terrific!

1963c-10 · 08-23-2014, 05:24 PM

Not bad for outside, 20gal portable compressor and home depot husky spray gun. Finish came out great, no runs

62 Barnfind · 08-23-2014, 07:44 PM

Looking good!

1963c-10 · 08-23-2014, 07:56 PM

Quote:

Originally Posted by 62 Barnfind

Looking good!

Thanks for the kind words. need to touch up the undercoating on the firwall. I did the undercoating 1st and oversprayed on purpose so the seams get double coated. The 3m seam sealer in the squeeze tube was easy to use. My buddy use to do glass for a living stopped by. He'll help me set the glass back in mon or wed next week. Ill hold o# reassembly until glass is in.

Heres a few more pics of finish. 1st one ive sprayed in 18 years.

1963c-10 · 08-23-2014, 07:59 PM

Will do the doors this week and then prep exterior of the cab.

1963c-10 · 08-23-2014, 08:05 PM

In case any ones interested:
Primer omni mp281 lacquer
Base omni dark pepsi blue 12908
Clear shop line jc630 polyurethane
And the clear hardner 4:1 shop line jh6370 polyurethane

1963c-10 · 08-23-2014, 10:06 PM

Got the glass sealed into the gasket tonight. Will get the trim in tomorrow or monday. Lots of tape

1963c-10 · 08-24-2014, 06:23 PM

Some more headway inside the cab. Got most of the dash switches in. Floor vents and cab light in. Taped off and sprayed the rear of the cab. And masked off the firewall and touched up the undercoating there.

1963c-10 · 08-24-2014, 06:28 PM

Few pics of the dash.

Also did the window trim install just a few minutes ago. Undid one 1/4 of the tape, installed trim piece. Ewtaped using what I just removed and repeated process. The trim is the 60-61 wide trim and really makes the glass look good.

Ta2Don · 08-24-2014, 07:08 PM

Lookin' Good Brother!

1963c-10 · 08-24-2014, 07:11 PM

Quote:

Originally Posted by Ta2Don

Lookin' Good Brother!

Thanks don!!!

**pimpston65** · 08-24-2014, 07:37 PM

Quote:

Originally Posted by 1963c-10

Thanks don!!!

whatchu gonna do when its all back together??? oh wait drive it!!!

1963c-10 · 08-24-2014, 07:58 PM

Quote:

Originally Posted by pimpston65

whatchu gonna do when its all back together??? oh wait drive it!!!

Haha, and then start the fleetside fulltime

**clemdaddy** · 08-25-2014, 06:43 AM

looks really good and i like that color of blue also. hard to believe it was painted outside... nice job.

08-20-2014, 04:20 PM	#1203
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: 1963 C-10 in NC I think he is talking about the plug that goes in the hole that the clutch linkage passes thru on the firewall to the Z bar. Trucks are looking good. __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

08-20-2014, 04:44 PM	#1204
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Yeah....I could definitely use one. I was going to weld it up, but I'd rather have the plug. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-21-2014, 09:07 AM	#1205
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Got the glass removed last night with help from Austin. Pinch welds all look great. Some light surface rust on the lower corners, but not rot or pinholes...and nothing the wire brush didn't take off. Should be able to finish prep on windshield opening....tape off and primer the rest of the interior tonight. MY goal at least. Hoping to get color down over the next weekend and start reassembly. Then back onto engine/trans. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 02:19 PM	#1206
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Got seam sealer down last night. 2 coats sealer and 2 coats base so far. Need 1 more coat base and then clear Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 03:11 PM	#1207
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: 1963 C-10 in NC Diggin' the Blue!!! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

08-23-2014, 03:22 PM	#1208
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Up to 3 coats color..1 clear Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 03:54 PM	#1211
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC No problem. Last coat clear down. Came out great. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 04:55 PM	#1212
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: 1963 C-10 in NC DANG!!! Looks terrific! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

08-23-2014, 05:24 PM	#1213
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Not bad for outside, 20gal portable compressor and home depot husky spray gun. Finish came out great, no runs __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 07:44 PM	#1214
62 Barnfind Registered User Join Date: Jan 2012 Location: Killeen, Tx Posts: 1,366	Re: 1963 C-10 in NC Looking good! __________________ John Z 1962 Chevy C10 Stepside 62 Barnfind My build tread: http://67-72chevytrucks.com/vboard/s...d.php?t=507513

08-23-2014, 07:59 PM	#1216
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Will do the doors this week and then prep exterior of the cab. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 08:05 PM	#1217
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC In case any ones interested: Primer omni mp281 lacquer Base omni dark pepsi blue 12908 Clear shop line jc630 polyurethane And the clear hardner 4:1 shop line jh6370 polyurethane __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-23-2014, 10:06 PM	#1218
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Got the glass sealed into the gasket tonight. Will get the trim in tomorrow or monday. Lots of tape Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-24-2014, 06:23 PM	#1219
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Some more headway inside the cab. Got most of the dash switches in. Floor vents and cab light in. Taped off and sprayed the rear of the cab. And masked off the firewall and touched up the undercoating there. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

08-24-2014, 06:28 PM	#1220
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: 1963 C-10 in NC Few pics of the dash. Also did the window trim install just a few minutes ago. Undid one 1/4 of the tape, installed trim piece. Ewtaped using what I just removed and repeated process. The trim is the 60-61 wide trim and really makes the glass look good. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer



Register or Log In To remove these advertisements.

08-24-2014, 07:08 PM	#1221
Ta2Don Registered User Join Date: Apr 2012 Location: Searcy, AR Posts: 4,203	Re: 1963 C-10 in NC Lookin' Good Brother! __________________ DON Proverbs 27:17 US Air Force Retarded errr Retired My '65 Stepper Build:http://67-72chevytrucks.com/vboard/s...d.php?t=533920 My '60 Rusty Patina Build:http://67-72chevytrucks.com/vboard/s...66#post7402266 My '72 http://67-72chevytrucks.com/vboard/s...59#post7204359 SOLD

08-25-2014, 06:43 AM	#1225
clemdaddy Senior Member Join Date: Oct 2009 Location: Fayetteville, Arkansas Posts: 1,923	Re: 1963 C-10 in NC looks really good and i like that color of blue also. hard to believe it was painted outside... nice job.

Register or Log In To remove these advertisements.