Its Mine the World Famous 67 Dragtruck - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Bowtie468** · 11-01-2005, 10:32 PM

I Likey !!!

71Dragtruck · 11-09-2005, 07:56 PM

Digging this up for some more info on the front end, I've been thinking about the same setup for my truck. Was wondering if the stance remained the same, as it width wise and how much it lowered the truck, and if you could keep the 5x5 bolt pattern?

I know I could just call Fat Man, or check out there web site, but I also wanted to check on some more progress pics of djracer's truck, been following along and can't wait to see it finished.

djracer · 11-09-2005, 11:23 PM

My truck is not 5 on 5 anymore and I think the track width might be a little more narrow than stock. You can get it with or without drop spindles. I think jim meyer makes a similar setup that uses caprice stuff that is 5 on 5!

I went and checked on it tonight they are starting the aluminum work in the bed. I tried a set of hedders that I think will work. I checked my driveshaft and I think it will work also but it needs a different yoke. The one I have is for a turbo 400! I also am going to have to move some tabs and the tranny mount brackets!

Kevin

71Dragtruck · 11-10-2005, 01:07 AM

Thanks for the info, keep us posted.

68Stepbed · 11-10-2005, 01:42 AM

Is it just me, or does a Dominator on top of a big block with a single plane make anyone else wet their skibbys?

DJ, I would almost be willing to drive to Bama just to see that bad boy make a few passes and hear it roar.

djracer · 11-10-2005, 10:44 AM

Hey when I get it going I'll keep all you posted on when and where I be running and I'd love for yall to come! I hope to promote a truck drag and show one day after I finish my truck! I think that would be awesome!

Kevin

panhandler62 · 11-10-2005, 11:48 AM

You'll need to wear a prophylactic when you fire that monster up. lol

djracer · 11-10-2005, 03:06 PM

probably not till I turn loose of the trans brake button!

MUNYPIT70 · 11-10-2005, 09:38 PM

What's up big man?! Truck looks great! I finally got my bell and got the truck going, but I had to take the driveshaft out and have it balanced. Should have it back early next week. Maybe I'll drop by your house in it and give ya a peek. Later, Neil.

jims69 · 11-10-2005, 10:11 PM

Quote:

Originally Posted by panhandler62

You'll need to wear a prophylactic when you fire that monster up. lol

I wish I had one on when I saw the pics.

Awesome!!

djracer · 11-11-2005, 03:28 AM

Did you take your driveshaft to Catfish at capital volvo? I need to go see him my aluminum shaft came with a turbo 400 yoke! I have a glide!

Kevin

Quote:

Originally Posted by MUNYPIT70

What's up big man?! Truck looks great! I finally got my bell and got the truck going, but I had to take the driveshaft out and have it balanced. Should have it back early next week. Maybe I'll drop by your house in it and give ya a peek. Later, Neil.

djracer · 11-11-2005, 03:34 AM

For those of you who haven't seen my motor here is a Pic or two!

mike nutt · 11-11-2005, 06:53 AM

awsome looking motor.can't wait see the complete truck .

67-72williso · 11-11-2005, 07:12 AM

Engine color! I like it BLACK.
Later Willis

86swb · 11-11-2005, 08:46 AM

I agree, that is one mean looking motor. You have to love them big blocks. Also like the Chevy logo on the covers.

djracer · 11-11-2005, 10:09 AM

Welcome to the board Mike! You should post some pics of your project!

Kevin

Let me know if you need help posting them!

Quote:

Originally Posted by mike nutt

awsome looking motor.can't wait see the complete truck .

djracer · 12-11-2005, 01:56 PM

More pics of progress

djracer · 12-11-2005, 01:59 PM

A few more

leadfoot067 · 12-11-2005, 02:11 PM

love it man....excellent work...

djracer · 12-11-2005, 02:15 PM

its coming along slow but sure!

**Yukon Jack** · 12-11-2005, 06:26 PM

Good to see more pics. Are you sticking with blue?

SCOTI · 12-11-2005, 07:37 PM

Very cool. I look forward to updates on this one!

chuck1960 · 12-12-2005, 12:19 AM

Love a quick vehicle, and it's better when it's full size truck. looking good

krue · 12-12-2005, 12:35 AM

Gotta see that thing run!

djracer · 12-12-2005, 12:37 AM

Quote:

Originally Posted by Yukon Jack

Good to see more pics. Are you sticking with blue?

I'm planning on black with blue and purple flames! I'm gonna paint the inside and just put black primer on the body and beat on it a while before paint!

11-01-2005, 10:32 PM	#101
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: Look what I got back yesterday! I Likey !!! __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

11-09-2005, 07:56 PM	#102
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: drag truck progress Digging this up for some more info on the front end, I've been thinking about the same setup for my truck. Was wondering if the stance remained the same, as it width wise and how much it lowered the truck, and if you could keep the 5x5 bolt pattern? I know I could just call Fat Man, or check out there web site, but I also wanted to check on some more progress pics of djracer's truck, been following along and can't wait to see it finished. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

11-09-2005, 11:23 PM	#103
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress My truck is not 5 on 5 anymore and I think the track width might be a little more narrow than stock. You can get it with or without drop spindles. I think jim meyer makes a similar setup that uses caprice stuff that is 5 on 5! I went and checked on it tonight they are starting the aluminum work in the bed. I tried a set of hedders that I think will work. I checked my driveshaft and I think it will work also but it needs a different yoke. The one I have is for a turbo 400! I also am going to have to move some tabs and the tranny mount brackets! Kevin Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-10-2005, 01:07 AM	#104
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: drag truck progress Thanks for the info, keep us posted. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

11-10-2005, 01:42 AM	#105
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: drag truck progress Is it just me, or does a Dominator on top of a big block with a single plane make anyone else wet their skibbys? DJ, I would almost be willing to drive to Bama just to see that bad boy make a few passes and hear it roar. __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

11-10-2005, 10:44 AM	#106
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress Hey when I get it going I'll keep all you posted on when and where I be running and I'd love for yall to come! I hope to promote a truck drag and show one day after I finish my truck! I think that would be awesome! Kevin __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-10-2005, 11:48 AM	#107
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: drag truck progress You'll need to wear a prophylactic when you fire that monster up. lol __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

11-10-2005, 03:06 PM	#108
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress probably not till I turn loose of the trans brake button! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-10-2005, 09:38 PM	#109
MUNYPIT70 Registered User Join Date: Sep 2005 Location: Greeneville, TN Posts: 27	Re: drag truck progress What's up big man?! Truck looks great! I finally got my bell and got the truck going, but I had to take the driveshaft out and have it balanced. Should have it back early next week. Maybe I'll drop by your house in it and give ya a peek. Later, Neil.

11-11-2005, 03:34 AM	#112
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress For those of you who haven't seen my motor here is a Pic or two! Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

11-11-2005, 06:53 AM	#113
mike nutt 69fatmotor Join Date: Oct 2005 Location: bama Posts: 660	Re: Look what I got back yesterday! awsome looking motor.can't wait see the complete truck .

11-11-2005, 07:12 AM	#114
67-72williso Junk/Daily Driver Club Join Date: Feb 2004 Location: Manheim, PA 17545 Posts: 253	Re: Look what I got back yesterday! Engine color! I like it BLACK. Later Willis __________________ Daily Driver: 1970 C-20 400 sbc,sm-465,Dana 61 one ton SRW rear, 3.07 gears, locker. There are three kinds of people: those who make things happen, those who watch things happen, and those who have no idea what happened!

11-11-2005, 08:46 AM	#115
86swb Born a Chevy Man Join Date: Apr 2005 Location: Navarre, Florida Posts: 10,221	Re: Look what I got back yesterday! I agree, that is one mean looking motor. You have to love them big blocks. Also like the Chevy logo on the covers. __________________ John or 86 (Viet Nam combat Vet-BIG RED ONE) '65-'66 1986 Chevy SWB Silverado 1984 Chevy Longbed Silverado New Kia Sportage (Wife's car and she loves it) CHEVY, American made w/pride! If you can read this, YOU NEED TO THANK A TEACHER! If you can read this in ENGLISH, PLEASE THANK A SOLDIER! GOD BLESS AMERICA AND BLESS OUR FIGHTING TROOPS

12-11-2005, 01:56 PM	#117
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress More pics of progress Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 12-11-2005 at 01:58 PM.

12-11-2005, 01:59 PM	#118
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress A few more Attached Images __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole! Last edited by djracer; 12-11-2005 at 02:00 PM.



Register or Log In To remove these advertisements.

12-11-2005, 02:11 PM	#119
leadfoot067 horsepower junkie Join Date: Aug 2003 Location: graham, washington Posts: 326	Re: drag truck progress love it man....excellent work... __________________ 67 short wide box,350/700r4/3.73posi 71 olds cutlass "S" mom bought new..12.30s@113MPH

12-11-2005, 02:15 PM	#120
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: drag truck progress its coming along slow but sure! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!

12-11-2005, 06:26 PM	#121
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,684	Re: drag truck progress Good to see more pics. Are you sticking with blue? __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

12-11-2005, 07:37 PM	#122
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,025	Re: drag truck progress Very cool. I look forward to updates on this one! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-12-2005, 12:19 AM	#123
chuck1960 Junior Member Join Date: Oct 2005 Location: cleveland, tn. Posts: 71	Re: drag truck progress Love a quick vehicle, and it's better when it's full size truck. looking good

12-12-2005, 12:35 AM	#124
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,450	Re: drag truck progress Gotta see that thing run! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

Register or Log In To remove these advertisements.