1964 Caprick-up = (C10+SWB)*(94 Caprice 9C1+LT1)

[niterider65]

lookin sweet cant wait to see more good job so far ..

[E911manager]

Thanks Fryer and Nightrider. A lot of fun so far!! Thanks for the encouragement!!
Posted via Mobile Device

[2001shadowace]

Its looking good!

[66-PMD-GMC]

I am trying to see the point of doing that. What are you trying to do? Make a cleaner firewall since the motor sits slightly forward?
Not critisism, just wondering what the method to your madness is.
So far, your creation is pretty cool.

[E911manager]

Yes, fill in the hole. It was going to be a big undertaking to move the motor "up and back" 2-3 inches. I thought of several ways and landed on this one. It looked like some yayhoo put a truck on a car chassis. So decided to smooth it out!!
Posted via Mobile Device

[E911manager]

Here is a pic with the gas tank hung in place..

[E911manager]

Here is a pic with the gas tank hung in place..

[E911manager]

Well this took about 5 hours. I used the caprice brake booster. I drilled new holes then cut the caprice firewall out and welded it over the 64 firewall to make a smooth clean finish. I will take a pic of it with the booster off when I get the inside mocked up. The caprice pedal mount is the backing plate for the booster. The pedal, rod, booster and switches all matched up so I used it.. The pedal will need to be cut, extended and bent around.

I cut the rear part of the truck pedal assembly basically in half, keeping the front part to mount steering column to. To make sure all the wiring connectors cleared, I had to relocate one of the brake switches (not sure if it a neutral lock out or the brake lights). It is actually a tight fit with all the wiring connectors on the column but it seemed to fit.

[66-PMD-GMC]

That looks pretty clean.
Nice .. very nice

[bondo510]

Now what frame are you going to use on the caprice? This is a great build! If you part that caprice body out I may need some stuff!

[E911manager]

Originally Posted by bondo510

Now what frame are you going to use on the caprice? This is a great build! If you part that caprice body out I may need some stuff!

Yes it is getting parted out when I am done. I already have some interest on this site for the chrome fender trim.

I have been using the trunk as my outside tool box (REDNECK). I told my wife that I am so fond of it that I may torch off the back half and keep it in the back yard to store tools in... I think my neighbors love it they will even love it more when it is a perminent structure...

[E911manager]

Originally Posted by 66-PMD-GMC

That looks pretty clean.
Nice .. very nice

Thanks, it is coming together. I am starting to find when I move something a little is sure messes with other things a lot... Like the brake assemblies location in comparison to the column and the columns location to the booster.. Less room there then what I had sketched out in my mind!!!

[Bears63]

I really like the lengths you are going to in order to have it looking clean and "natural". All that extra effort is going to pay off in the finished project, that's for sure.

[E911manager]

Originally Posted by Bears63

I really like the lengths you are going to in order to have it looking clean and "natural". All that extra effort is going to pay off in the finished project, that's for sure.

Man Bears, I needed to hear that.. Thanks!!!

[E911manager]

I am eyeing up the carprice under dash heat and AC and thinking it would work.... Especially since I flattened out the firewall... HMMMM!!! Save me a thousand bucks and could get parts at the local auto parts store..

[C@rnut001]

Originally Posted by E911manager

I am eyeing up the carprice under dash heat and AC and thinking it would work.... Especially since I flattened out the firewall... HMMMM!!! Save me a thousand bucks and could get parts at the local auto parts store..

Good luck on using the AC and under dash heat. I think you are doing a great job of putting the truck on the newer caprice frame. Keep it up

[E911manager]

Originally Posted by C@rnut001

Good luck on using the AC and under dash heat. I think you are doing a great job of putting the truck on the newer caprice frame. Keep it up

Thanks Owen.. 3 day weekend coming up so I hope to make some good progress..

[E911manager]

Originally Posted by E911manager

I am eyeing up the carprice under dash heat and AC and thinking it would work.... Especially since I flattened out the firewall... HMMMM!!! Save me a thousand bucks and could get parts at the local auto parts store..

Well it won't work. It is to thick!! I eyed up the caprice firewall and thought about cutting out the part around the AC and meshing it into the 64's firewall. But..... Decided to just smooth it off and go with a old air unit.
Posted via Mobile Device

[Pop's C-10]

nice work

[E911manager]

Originally Posted by Pop's C-10

nice work

Thanks Pops.
Posted via Mobile Device

[punk17]

Good job on the truck ! Lot of hard work. But will be worth it.
Posted via Mobile Device

[E911manager]

Originally Posted by punk17

Good job on the truck ! Lot of hard work. But will be worth it.
Posted via Mobile Device

Thanks punk 17.
Posted via Mobile Device

[E911manager]

Worked some more on the firewall this weekend. Filled the rest of the holes including the wiring harness hole. I cut a new one out a little bigger and under the inner fender bolts.

I also tore deep into the caprice. I pulled the entire wiring harness out and started making plans on how to use it. The power doors, windows and mirrors harness is plug and play so 2 connectors and it goes away. It won't be the prettiest truck under the hood but it will function!!!

Next goal.... Started before March 1st!!! We shall see.
Posted via Mobile Device

[nomrlz]

nice work! i love my 95 roadmaster wagon. these chassis are great platforms and can do it all from hauling to hauling azz.

[firefighter736]

Originally Posted by E911manager

Next goal.... Started before March 1st!!! We shall see.
Posted via Mobile Device

As fast as you work I wouldn't be surprised to see it started before Feb 1st!