Tricked-out Chevy six cylinder engines - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 09-06-2010, 06:06 PM

TO THE TOP!
1 Bad Mamma Jamma 6 Bangers!!!!!!

**N2TRUX** · 09-06-2010, 06:49 PM

You can't have a 6 banger thread with out posting pics from Lucy. This was in n2billet's sweet red 68.

tommyd241 · 09-06-2010, 09:13 PM

Quote:

Originally Posted by aerotruk63

Not a great picture but one more to add to the pile.I'm so tired of people asking why I didn't put a V8 in my truck.

Do you tell them, because everyone and their mother does? Very nice 6 banger BTW.
Posted via Mobile Device

DA INFERNO · 09-07-2010, 12:46 AM

Quote:

Originally Posted by jchav62

Here's a few from my files...

I'm doing a 250 with a Clifford Intake and long tube headers on the 65...

The first 2 pics are of my truck, I am going to be redoing it again. Not sure what yet.

fryer1979 · 09-07-2010, 06:47 AM

This thread ALMOST makes me want to go the opposite way and swap from a V8 to an I6. If I had an I6 in mine, I definitely would not swap it out, I've always loved the ones I've owned. Very cool engines in the pics here, please keep 'em coming.

**aerotruk63** · 09-07-2010, 07:06 PM

255 through Dynomax X muffler. Play it loud!

http://www.youtube.com/watch?v=5JKgJN7t0FI

1Bad62Pro/Street · 09-30-2011, 06:40 AM

Teehee.........

Vintage Hot Rod Straight 6 [S3 Ep.11-1] -...

Crash'd Artwerks · 09-30-2011, 01:27 PM

This is one of my dad's 6 cylinders. It's a 250 with a 292 crank, 350 flat top pistons, and 400 rods.

I'll post the video of his 292 on the engine run stand later tonight if I think about it.

-Aaron
Posted via Mobile Device
Posted via Mobile Device

**Palf70Step** · 09-30-2011, 03:41 PM

That is VERY nice!!

Vernski · 09-30-2011, 05:16 PM

Not to perfection but getting there, Mercruiser boat cam, Clifford hot water heated intake, Eldebrock 1404, cast iron headers from Tom Langdon's Stovebolt. And it's a 230 cu.in a GMC....Vernski

vin63 · 09-30-2011, 05:54 PM

Here are a couple of my buddy's 194 to 292 conversion in his '63 Chevy II...

chop_shop · 09-30-2011, 08:12 PM

i would love some info on this setup. really just the throttle bodys...

post #40

Quote:

Originally Posted by greg64

Now that we're back on track, how about these pics?

KroAutomotiveInc · 10-01-2011, 04:24 AM

relaxedsierra · 10-01-2011, 04:41 AM

great thread! Ive done a bit to my V6 and plan on doing a cam this winter...

Crash'd Artwerks · 10-19-2011, 10:45 AM

This is my dad's other 6 cylinder. It's had A LOT of work done to it. Not sure how to embed YouTube here, so I'll have to just post the link.

http://youtu.be/bQKvdHkfTms

-Aaron

DLOE65 · 10-19-2011, 02:45 PM

Hey Aaron, where did your dad get that valve cover? I would love to get one of those!
Posted via Mobile Device

jimmydean · 10-19-2011, 03:14 PM

Quote:

Originally Posted by N2TRUX

You can't have a 6 banger thread with out posting pics from Lucy. This was in n2billet's sweet red 68.

Lucy has the best engine bay IMO. I remember the first time those pics were posted. I love that truck and the engine bay is perfect.

Crash'd Artwerks · 10-19-2011, 08:29 PM

Quote:

Originally Posted by DLOE65

Hey Aaron, where did your dad get that valve cover? I would love to get one of those!
Posted via Mobile Device

If I remember correctly, I bought it from a guy on eBay. I think he sells quite a bit of 6 cylinder performance parts for 6 cylinders, or did at one time.

-Aaron

Pop's C-10 · 10-19-2011, 08:50 PM

beautiful powerplants

motiveauto · 10-19-2011, 10:08 PM

Heres mine, 230...pretty much stock with some split headers and a offy intake and valve cover. Anyone know what breather will fit the Offy valve cover?

A.T. RockDriller · 10-19-2011, 10:31 PM

Quote:

Originally Posted by 4dranch

Nothing fancy but here's mine. I know it's not a inline 6, but it's still a 6...305 V6

That sure looks good to a fella like me....

305E to '67 351E.....Conversion Week....or Hell Week.....or more like Hell Month...
Almost finished.

DLOE65 · 10-20-2011, 12:08 PM

Her Aaron, if you get a chance next time your on eBay, see if you could find that guys user name.

Thanks!
-Derek
Posted via Mobile Device

Crash'd Artwerks · 10-21-2011, 07:45 PM

Quote:

Originally Posted by DLOE65

Her Aaron, if you get a chance next time your on eBay, see if you could find that guys user name.

Thanks!
-Derek
Posted via Mobile Device

Well Derek, it's not looking good for the guys I got the valve cover from. Here's a website I found that shows a "Going Out Of Business Sale". Notice the top row of pictures, 4th picture over, looks like a stack of 6 cylinder valve covers. Hopefully they still have some !!

http://www.lockintool.com/machinery-for-sale/

And here's their contact info, if they're still in business.

http://m.manta.com/c/mm200b7/precisi...e?page=company

I sure hope that helps. Let me know what you find out.

EDIT ! I called the number for the contact info just out of curiosity and a guy answered the phone ! It was the owner's son working on some of his personal stuff. He said his dad has been talking about retiring for a while and he thought he had sold the molds for the valve covers, but wasn't sure if he had any of them left, so he told me to call back Monday after about 8:30am. Good luck !!
-Aaron
Posted via Mobile Device

Shaky · 10-22-2011, 09:27 AM

How did I miss this thread that started in 2008?!?

250 with Clifford cam, intake, headers. Holley 390 and an HEI. Backed by a Ricmond 5-speed.

DLOE65 · 10-22-2011, 01:37 PM

Here's Mine,
292 .30 over,Balanced, Clifford Cam, Offy manifold with water heat plate, Holley 390, Landon Cast split exhaust manifolds, Landon Mini HEI, Landon Billet Push Rod Covers, Taylor Wires, aluminum water neck, Think i am going to be running Porter Mufflers.

09-06-2010, 06:06 PM	#101
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Tricked-out Chevy six cylinder engines TO THE TOP! 1 Bad Mamma Jamma 6 Bangers!!!!!! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

09-06-2010, 06:49 PM	#102
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: Tricked-out Chevy six cylinder engines You can't have a 6 banger thread with out posting pics from Lucy. This was in n2billet's sweet red 68. Attached Images __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

09-07-2010, 06:47 AM	#105
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: Tricked-out Chevy six cylinder engines This thread ALMOST makes me want to go the opposite way and swap from a V8 to an I6. If I had an I6 in mine, I definitely would not swap it out, I've always loved the ones I've owned. Very cool engines in the pics here, please keep 'em coming.

09-30-2011, 01:27 PM	#108
Crash'd Artwerks Registered User Join Date: May 2011 Location: McKinney, TEXAS ! Posts: 84	Re: Tricked-out Chevy six cylinder engines This is one of my dad's 6 cylinders. It's a 250 with a 292 crank, 350 flat top pistons, and 400 rods. I'll post the video of his 292 on the engine run stand later tonight if I think about it. -Aaron Posted via Mobile Device Posted via Mobile Device

09-30-2011, 03:41 PM	#109
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,083	Re: Tricked-out Chevy six cylinder engines That is VERY nice!! __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

09-30-2011, 05:16 PM	#110
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: Tricked-out Chevy six cylinder engines Not to perfection but getting there, Mercruiser boat cam, Clifford hot water heated intake, Eldebrock 1404, cast iron headers from Tom Langdon's Stovebolt. And it's a 230 cu.in a GMC....Vernski Attached Images

09-30-2011, 05:54 PM	#111
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: Tricked-out Chevy six cylinder engines Here are a couple of my buddy's 194 to 292 conversion in his '63 Chevy II... __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

10-01-2011, 04:24 AM	#113
KroAutomotiveInc Registered User Join Date: Jun 2010 Location: UT Posts: 908	Re: Tricked-out Chevy six cylinder engines __________________ Car & Truck Projects Google Community. https://plus.google.com/communities/...80679980403145 Youtube channel. http://www.youtube.com/channel/UC2HB...view_as=public 1964 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=419525

10-01-2011, 04:41 AM	#114
relaxedsierra Registered User Join Date: Sep 2011 Location: Southaven,MS Posts: 39	Re: Tricked-out Chevy six cylinder engines great thread! Ive done a bit to my V6 and plan on doing a cam this winter...

10-19-2011, 10:45 AM	#115
Crash'd Artwerks Registered User Join Date: May 2011 Location: McKinney, TEXAS ! Posts: 84	Re: Tricked-out Chevy six cylinder engines This is my dad's other 6 cylinder. It's had A LOT of work done to it. Not sure how to embed YouTube here, so I'll have to just post the link. http://youtu.be/bQKvdHkfTms -Aaron

10-19-2011, 02:45 PM	#116
DLOE65 Registered User Join Date: Nov 2009 Location: Orange, CA Posts: 525	Re: Tricked-out Chevy six cylinder engines Hey Aaron, where did your dad get that valve cover? I would love to get one of those! Posted via Mobile Device

10-19-2011, 08:50 PM	#119
Pop's C-10 Registered User Join Date: Jul 2010 Location: memphis Posts: 2,537	Re: Tricked-out Chevy six cylinder engines beautiful powerplants __________________ 1981 C-10 (Pop's) 1978 Camaro 2006 Lacrosse

10-19-2011, 10:08 PM	#120
motiveauto Registered User Join Date: Dec 2008 Location: long island new york Posts: 88	Re: Tricked-out Chevy six cylinder engines Heres mine, 230...pretty much stock with some split headers and a offy intake and valve cover. Anyone know what breather will fit the Offy valve cover? __________________ 86 K20 6" lift 66 C10 LS2 T56 1947 Ford Rat Rod Softail Deluxe Softail Chopper

10-20-2011, 12:08 PM	#122
DLOE65 Registered User Join Date: Nov 2009 Location: Orange, CA Posts: 525	Re: Tricked-out Chevy six cylinder engines Her Aaron, if you get a chance next time your on eBay, see if you could find that guys user name. Thanks! -Derek Posted via Mobile Device

10-22-2011, 09:27 AM	#124
Shaky Six in a row makes it go... Join Date: Mar 2009 Location: Vacationland: Maine Posts: 1,346	Re: Tricked-out Chevy six cylinder engines How did I miss this thread that started in 2008?!? 250 with Clifford cam, intake, headers. Holley 390 and an HEI. Backed by a Ricmond 5-speed. Attached Images __________________ 67 C20 long step resto: http://67-72chevytrucks.com/vboard/s...d.php?t=342086 66 C10 long step build: http://67-72chevytrucks.com/vboard/s...=1#post3814790 CT to Alaska in a 67 C10: http://67-72chevytrucks.com/vboard/s...d.php?t=399224 “The height of sophistication is simplicity." - Clare Boothe Luce



Register or Log In To remove these advertisements.

10-22-2011, 01:37 PM	#125
DLOE65 Registered User Join Date: Nov 2009 Location: Orange, CA Posts: 525	Re: Tricked-out Chevy six cylinder engines Here's Mine, 292 .30 over,Balanced, Clifford Cam, Offy manifold with water heat plate, Holley 390, Landon Cast split exhaust manifolds, Landon Mini HEI, Landon Billet Push Rod Covers, Taylor Wires, aluminum water neck, Think i am going to be running Porter Mufflers. Attached Images

Register or Log In To remove these advertisements.