72 K30 Build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

7dee2 · 01-11-2015, 12:59 AM

Talking color we've been on the fence with the original yellow for this project (even told my wife we could call it Daisy) but cannot bring myself to do it. Truck is going to get a complete color change, we do like the 50th anniversary vibe the exterior has going on now but still leaning towards all White as the truck will live outside a lot. Medium Blue like my C30 is a close second, or maybe 2-tone Blue/White with Blue interior we really like that combo also?

**nlped** · 01-09-2015, 12:17 PM

I'm in... this thing is cool. And I have a Open Road Motorhome cab with a similar cut out and was trying to figure out what to do with the cab, it's rust free and I hate to scrap it, now I know what to do

coops714x4 · 01-09-2015, 09:20 PM

Brett, I'm not sure but go look at American Racing. Coop

**JJorgensen52** · 01-12-2015, 02:02 PM

Quote:

Originally Posted by 7dee2

Talking color we've been on the fence with the original yellow for this project (even told my wife we could call it Daisy) but cannot bring myself to do it. Truck is going to get a complete color change, we do like the 50th anniversary vibe the exterior has going on now but still leaning towards all White as the truck will live outside a lot. Medium Blue like my C30 is a close second, or maybe 2-tone Blue/White with Blue interior we really like that combo also?

What about doing a 50th style paint scheme, but using the Medium Blue? I've always liked that particular two tone option, I think it would look sharp on a big truck!

7dee2 · 01-13-2015, 10:31 AM

Had not thought about that but I like the idea a lot! Going on the short list thanks!

7dee2 · 01-13-2015, 10:46 AM

More disassembly… Door Day!

swamp rat · 01-14-2015, 02:35 AM

Your making great progress, more than i can say about my project.

7dee2 · 01-14-2015, 01:18 PM

Quote:

Originally Posted by swamp rat

Your making great progress, more than i can say about my project.

Thanks, a heated garage really helps out this time of year.

7dee2 · 01-14-2015, 01:27 PM

Found a few more holes in the dash and floor. Thinking we will wait until we can flip the cab onto the firewall. It will give us a better angle and there is some other floor work (adding bucket seat floor braces & console) that will be addressed at the same time.

7dee2 · 01-16-2015, 04:22 PM

Managed to get the windshield and trim out without busting either.

A previous owner was not shy with the silicone though. They filled the drip rails and had installed a screen on the cowl to keep debris out. That’s going to make a mess (silicone bits everywhere) as I’ll probably take a wire wheel to it. Unless somebody knows an easier way?

mjensen · 01-17-2015, 11:07 PM

Looking awesome Brett! I expected to see the hole filled

DWilbur · 01-21-2015, 03:26 PM

That kind of short cut is what some would call a party foul. I spent 2 days welding up 47 holes in my frame that are not required.

**Dieselwrencher** · 01-21-2015, 08:35 PM

It's looking better already!

7dee2 · 01-22-2015, 12:47 PM

Quote:

Originally Posted by JJorgensen52

Wait, you don't like welding up random extra holes??

Nice work!

Thank you sir, yes less holes is better in my opinion.

Quote:

Originally Posted by DWilbur

That kind of short cut is what some would call a party foul. I spent 2 days welding up 47 holes in my frame that are not required.

I hear you. Thinking we have about that many more to go not counting the big panels.

Quote:

Originally Posted by Dieselwrencher

It's looking better already!

Thanks D! I'm really pleased with how it's turning out.

7dee2 · 01-22-2015, 12:55 PM

Needed a fuel fill patch for the next round of welding.

**JJorgensen52** · 01-23-2015, 11:54 AM

Quote:

Originally Posted by 7dee2

Needed a fuel fill patch for the next round of welding.

Maybe I missed the plan on this, but what are you going to run for a fuel filler?

I'm actually thinking about what to do with my '50 since it's going to have an under bed tank and I'm not a huge fan of the through-floor fill necks

7dee2 · 01-23-2015, 12:47 PM

Quote:

Originally Posted by swamp rat

Looks just like a pre made one!

Thanks!

Quote:

Originally Posted by JJorgensen52

Maybe I missed the plan on this, but what are you going to run for a fuel filler?

I'm actually thinking about what to do with my '50 since it's going to have an under bed tank and I'm not a huge fan of the through-floor fill necks

Still have useable saddle tanks from the RV and even if we don't use that set up I'm sure it will be something similar. Also toying with the idea of running another tank all the way in the back between the rails.

7dee2 · 01-23-2015, 01:24 PM

Quote:

Originally Posted by JJorgensen52

Maybe I missed the plan on this, but what are you going to run for a fuel filler?

I'm actually thinking about what to do with my '50 since it's going to have an under bed tank and I'm not a huge fan of the through-floor fill necks

I didn't really answer your question earlier. The RV saddle tanks have a welded on neck and I'm not sure they will work with the flatbed. The other style tank I'm thinking about would be more like a semi with a screw on cap type fill.

swamp rat · 01-23-2015, 12:45 AM

Looks just like a pre made one!

swamp rat · 01-23-2015, 10:05 PM

Is that the Eastwood Internal Frame coating?

I was thinking about what to spray inside right above the mirror by removing the visors and spraying in from there. .

Eastwood also sells this stuff:

http://www.eastwood.com/ew-rust-enca...html?reltype=3

I almost pulled the triger on this today for the same purpose, .

http://www.eastwood.com/eastwood-hea...-in-black.html

Not sure what is better and why, any thoughts about one VS the other?
.
.
.
.

7dee2 · 01-24-2015, 12:06 PM

Yes it is and here is a link http://www.eastwood.com/internal-fra...arent_id=25961

We needed this kind of product for my 1/2 ton project and decided to use it again for this one.

Some of my reasons for using this product are I've used it before, the color you can tell where it is and where it ain't. This stuff does go on sale and if you buy enough you can get free shipping as well at times so the price was right for us (got 5 cans for under $75 delivered) . It has been around and I think has more favorable reviews?

Other than that I have no opinion except for as much time and effort that goes into fixing one of these cabs I think you would be foolish not to use something.

mjensen · 01-24-2015, 12:10 PM

Brett, you're making some great progress! Why don't you stop working on yours and come down and work on mine!

7dee2 · 01-26-2015, 01:59 PM

Quote:

Originally Posted by mjensen

Brett, you're making some great progress! Why don't you stop working on yours and come down and work on mine!

What's next I'll be right over!

7dee2 · 01-26-2015, 02:08 PM

We went from nipples to scar tissue!

swamp rat · 01-26-2015, 09:24 PM

you using an arch welder??

01-11-2015, 12:59 AM	#1
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build Talking color we've been on the fence with the original yellow for this project (even told my wife we could call it Daisy) but cannot bring myself to do it. Truck is going to get a complete color change, we do like the 50th anniversary vibe the exterior has going on now but still leaning towards all White as the truck will live outside a lot. Medium Blue like my C30 is a close second, or maybe 2-tone Blue/White with Blue interior we really like that combo also? __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-09-2015, 12:17 PM	#2
nlped Senior Member Join Date: Jul 2009 Location: Hayden, Al. Posts: 4,148	Re: 72 K30 Build I'm in... this thing is cool. And I have a Open Road Motorhome cab with a similar cut out and was trying to figure out what to do with the cab, it's rust free and I hate to scrap it, now I know what to do __________________ Carter 1968 Chevy SWB Fleet... Walt 1963-1/2 Ford Falcon Futura...Martha

01-09-2015, 09:20 PM	#3
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: 72 K30 Build Brett, I'm not sure but go look at American Racing. Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

01-13-2015, 10:31 AM	#5
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build Had not thought about that but I like the idea a lot! Going on the short list thanks! __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-13-2015, 10:46 AM	#6
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build More disassembly… Door Day! Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-14-2015, 02:35 AM	#7
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 72 K30 Build Your making great progress, more than i can say about my project. __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-14-2015, 01:27 PM	#9
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build Found a few more holes in the dash and floor. Thinking we will wait until we can flip the cab onto the firewall. It will give us a better angle and there is some other floor work (adding bucket seat floor braces & console) that will be addressed at the same time. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-16-2015, 04:22 PM	#10
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build Managed to get the windshield and trim out without busting either. A previous owner was not shy with the silicone though. They filled the drip rails and had installed a screen on the cowl to keep debris out. That’s going to make a mess (silicone bits everywhere) as I’ll probably take a wire wheel to it. Unless somebody knows an easier way? Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-17-2015, 11:07 PM	#11
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: 72 K30 Build Looking awesome Brett! I expected to see the hole filled __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

01-21-2015, 03:26 PM	#12
DWilbur Registered User Join Date: Aug 2013 Location: San Jose Ca Posts: 965	Re: 72 K30 Build That kind of short cut is what some would call a party foul. I spent 2 days welding up 47 holes in my frame that are not required.

01-21-2015, 08:35 PM	#13
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: 72 K30 Build It's looking better already! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

01-22-2015, 12:55 PM	#15
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build Needed a fuel fill patch for the next round of welding. Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-23-2015, 12:45 AM	#19
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 72 K30 Build Looks just like a pre made one! __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-23-2015, 10:05 PM	#20
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 72 K30 Build Is that the Eastwood Internal Frame coating? I was thinking about what to spray inside right above the mirror by removing the visors and spraying in from there. . Eastwood also sells this stuff: http://www.eastwood.com/ew-rust-enca...html?reltype=3 I almost pulled the triger on this today for the same purpose, . http://www.eastwood.com/eastwood-hea...-in-black.html Not sure what is better and why, any thoughts about one VS the other? . . . . __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

01-24-2015, 12:06 PM	#21
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build Yes it is and here is a link http://www.eastwood.com/internal-fra...arent_id=25961 We needed this kind of product for my 1/2 ton project and decided to use it again for this one. Some of my reasons for using this product are I've used it before, the color you can tell where it is and where it ain't. This stuff does go on sale and if you buy enough you can get free shipping as well at times so the price was right for us (got 5 cans for under $75 delivered) . It has been around and I think has more favorable reviews? Other than that I have no opinion except for as much time and effort that goes into fixing one of these cabs I think you would be foolish not to use something. __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2



Register or Log In To remove these advertisements.

01-24-2015, 12:10 PM	#22
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: 72 K30 Build Brett, you're making some great progress! Why don't you stop working on yours and come down and work on mine! __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

01-26-2015, 02:08 PM	#24
7dee2 Registered User Join Date: May 2011 Location: Syracuse, Utah Posts: 1,964	Re: 72 K30 Build We went from nipples to scar tissue! Attached Images __________________ Brett 67 Camaro SS: 67 Camaro Build 72 Cheyenne/C10 Super 115" Fleetside: 72 C10 Build 72 Cheyenne/K30 Super 133" Longhorn DRW: 72 K30 Build SOLD YouTube: https://www.youtube.com/@6dee7-7dee2

01-26-2015, 09:24 PM	#25
swamp rat Registered User Join Date: Oct 2007 Location: Spanaway Posts: 8,451	Re: 72 K30 Build you using an arch welder?? __________________ Mike. Swamp Rat build thread : http://67-72chevytrucks.com/vboard/s...d.php?t=595019 72 3/4T 4X4 4" BDS Lift 33" BFG's

Register or Log In To remove these advertisements.