KS going to be parting this 70 chevy next - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**va72longhorn** · 01-12-2012, 01:11 PM

Randy, Id be interested on getting the everything needed on the inside of the drivers door ie, decent chrome wing window, window and door regulators, strike, lock rods, window channels, drivers glass, etc. I have the exterior door handle and lockset. Shipped to 22701. Let me know what you kind of deal you can work out.

teeitup · 01-12-2012, 02:30 PM

Madness, no problem

Lex, $70 shipped for the better set

va72longhorn, I don't ship door windows sorry. As for the wings I only sell them in pairs. What year are you needing this all for? I can look and see what all I have

Thanks Randy

LEX · 01-12-2012, 02:49 PM

Randy, I'll take the vent windows. Pls PM me your info. Thanks

**va72longhorn** · 01-12-2012, 03:22 PM

'72, Randy. A mismatched quality pair would work as long as the drivers side is nice. I had my whole drivers door disappear while it was at the body shop (whole other story!) before I was able to build out the new door shell.

teeitup · 01-12-2012, 07:39 PM

Lex, info will be sent

va72longhorn, I should have that, I will look tonight

Thanks Randy

**ScottH** · 01-13-2012, 12:04 AM

Randy, can u tell me what shipping would be on the intake manifold to 08753?
Also, looking for a stock dipstick and tube.

Thanks
Scott

teeitup · 01-13-2012, 12:07 AM

Scott, I can get a quote Fri for you. Also I should have a stock dip stick and tube on this burb I'm parting. Thanks Randy

teeitup · 01-14-2012, 11:29 AM

got it most the way parted, geaded to scrap with what is left today

teeitup · 01-14-2012, 11:30 AM

mooomomoooooooooooooo

teeitup · 01-14-2012, 11:31 AM

7555555555555

Vintage Windmills · 01-14-2012, 11:57 AM

Randy, did you get the sensors for the Air fuel monitor pulled?
thanks,
Jud

MONTE · 01-14-2012, 12:37 PM

wheel tubs?

no moa · 01-14-2012, 01:00 PM

Randy, how much for the little CST badges, in the 3rd pic of post 110?
Thanks
Glen

teeitup · 01-14-2012, 01:29 PM

Jud, the wires were cut under the dash, so it wasn't going anywhere, sorry

Monte, no good ones, sorry

Glen, $12 and I can put them in the box with doors. They have some pitting but have studs

Thanks Randy

no moa · 01-14-2012, 01:31 PM

Quote:

Originally Posted by teeitup

Glen, $12 and I can put them in the box with doors. They have some pitting but have studs

Thanks Randy

Sounds good sir. PayPal is on its way. Thank you.

68c20lwb · 01-14-2012, 05:04 PM

are the side view mirrors intact and still for sale? 58201?

teeitup · 01-14-2012, 05:35 PM

Glen, sounds good, I'll get it all shipped out next week

68c20lwb, Yes mirrors are still for sale, One of the glass is cracked, some rust on arms that go up to mirror glass

Thanks Randy

ashx2 · 01-16-2012, 11:06 PM

Hi Randy! Still got the antennea off the truck, is it straight, and do you think it is an oem or an aftermarket? And if it's not an aftermarket, how much shipped to TX @ 76450?

Thanks,
Greg

teeitup · 01-17-2012, 09:14 AM

Greg, its was aftermarket, I have one on a burb I'm parting I'll get pics of it. Thanks Randy

teeitup · 01-17-2012, 01:51 PM

Pics for Scott

**425HP409** · 01-17-2012, 02:45 PM

Quote:

Originally Posted by teeitup

Charles $30 plus shipping but I need to look and see if I have some with no dings in it. I can check Wed after work. My zip is 66512. Thanks Randy

I am ready to ship you my box, have you found a set that I can use for my truck? Thanks, Charles

HeavyMetalChevy · 01-17-2012, 03:02 PM

Hey Randy... you should just start selling me complete trucks in bulk...lol seems you have too many???? Great parts man!

teeitup · 01-17-2012, 08:31 PM

Charles, I checked all teh ones I have right now have dings in them, sorry

Duane, kind of goes in streaks on finding trucks, I may go a month without finding one but may find 3 next week, HOPEFULLY!!!

Thanks Randy

johnechi · 01-18-2012, 01:07 PM

Hi Randy, looking for a glove box light assembly and a rear window trim corner, passenger side. (the small one)

teeitup · 01-18-2012, 03:35 PM

John, sorry none of that right now. Thanks Randy

01-12-2012, 01:11 PM	#101
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 434	Re: going to be parting this 70 chevy next Randy, Id be interested on getting the everything needed on the inside of the drivers door ie, decent chrome wing window, window and door regulators, strike, lock rods, window channels, drivers glass, etc. I have the exterior door handle and lockset. Shipped to 22701. Let me know what you kind of deal you can work out.

01-12-2012, 02:30 PM	#102
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Madness, no problem Lex, $70 shipped for the better set va72longhorn, I don't ship door windows sorry. As for the wings I only sell them in pairs. What year are you needing this all for? I can look and see what all I have Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-12-2012, 02:49 PM	#103
LEX Registered User Join Date: Oct 2011 Location: Houston, Texas Posts: 884	Re: going to be parting this 70 chevy next Randy, I'll take the vent windows. Pls PM me your info. Thanks

01-12-2012, 03:22 PM	#104
va72longhorn Senior Member Join Date: Dec 2009 Location: Culpeper, VA Posts: 434	Re: going to be parting this 70 chevy next '72, Randy. A mismatched quality pair would work as long as the drivers side is nice. I had my whole drivers door disappear while it was at the body shop (whole other story!) before I was able to build out the new door shell.

01-12-2012, 07:39 PM	#105
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Lex, info will be sent va72longhorn, I should have that, I will look tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-13-2012, 12:04 AM	#106
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,190	Re: going to be parting this 70 chevy next Randy, can u tell me what shipping would be on the intake manifold to 08753? Also, looking for a stock dipstick and tube. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

01-13-2012, 12:07 AM	#107
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Scott, I can get a quote Fri for you. Also I should have a stock dip stick and tube on this burb I'm parting. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2012, 11:29 AM	#108
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next got it most the way parted, geaded to scrap with what is left today Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2012, 11:30 AM	#109
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next mooomomoooooooooooooo Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2012, 11:31 AM	#110
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next 7555555555555 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2012, 11:57 AM	#111
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: going to be parting this 70 chevy next Randy, did you get the sensors for the Air fuel monitor pulled? thanks, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

01-14-2012, 12:37 PM	#112
MONTE Registered User Join Date: Oct 2005 Location: Donna, Texas Posts: 286	Re: going to be parting this 70 chevy next wheel tubs?

01-14-2012, 01:00 PM	#113
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: going to be parting this 70 chevy next Randy, how much for the little CST badges, in the 3rd pic of post 110? Thanks Glen __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

01-14-2012, 01:29 PM	#114
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Jud, the wires were cut under the dash, so it wasn't going anywhere, sorry Monte, no good ones, sorry Glen, $12 and I can put them in the box with doors. They have some pitting but have studs Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-14-2012, 05:04 PM	#116
68c20lwb Registered User Join Date: Mar 2011 Location: Hankinson, ND Posts: 190	Re: going to be parting this 70 chevy next are the side view mirrors intact and still for sale? 58201? __________________ 1968 C20 450hp 425ft-lbs 454/SM465 4.56's 2004 HD rims, needs paint and a 5th gear! 1969 C30 Open Road Motorhome 350/th400 1972 K10 350/350/205 Daily Driver -SOLD



Register or Log In To remove these advertisements.

01-14-2012, 05:35 PM	#117
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Glen, sounds good, I'll get it all shipped out next week 68c20lwb, Yes mirrors are still for sale, One of the glass is cracked, some rust on arms that go up to mirror glass Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-16-2012, 11:06 PM	#118
ashx2 Registered User Join Date: Aug 2008 Location: Graham, Texas Posts: 239	Re: going to be parting this 70 chevy next Hi Randy! Still got the antennea off the truck, is it straight, and do you think it is an oem or an aftermarket? And if it's not an aftermarket, how much shipped to TX @ 76450? Thanks, Greg

01-17-2012, 09:14 AM	#119
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Greg, its was aftermarket, I have one on a burb I'm parting I'll get pics of it. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2012, 01:51 PM	#120
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Pics for Scott Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-17-2012, 03:02 PM	#122
HeavyMetalChevy Just a Member Join Date: Aug 2011 Location: Vevay, IN 47043 remimartin257@aol.com Posts: 4,603	Re: going to be parting this 70 chevy next Hey Randy... you should just start selling me complete trucks in bulk...lol seems you have too many???? Great parts man! __________________ 72 C-10 Cheyenne 350/350 ALL ORIGINAL 81,158 miles (1st) 69 7/8 ton(s & l) 66 327 short block rebuild.325 hp(2nd) 70 C-20 88 350 long block rebuild .040 bore. forged crank GM ZZ4 Hot Cam 1.5 roller rockers.375hp Aluminum TH400(3rd) 71 SWB frame off with 68 body. POSI PayPal: remimartin257@aol.com Business Inquires: 812 801 5111 "Help me, help you" that's my motto Members met... BuildinA68, jessewebb, daddymoo2, 70STOVEBOLT, irishfan77, feller, fine69, chevytruckguy70, jamie72, Nohatch, 2112, drtydog

01-17-2012, 08:31 PM	#123
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next Charles, I checked all teh ones I have right now have dings in them, sorry Duane, kind of goes in streaks on finding trucks, I may go a month without finding one but may find 3 next week, HOPEFULLY!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-18-2012, 01:07 PM	#124
johnechi Registered User Join Date: Jun 2009 Location: Hesperia, CA Posts: 159	Re: going to be parting this 70 chevy next Hi Randy, looking for a glove box light assembly and a rear window trim corner, passenger side. (the small one)

01-18-2012, 03:35 PM	#125
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: going to be parting this 70 chevy next John, sorry none of that right now. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.