offical lowered thread of standard cab pu, lets see them! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

grumpyolddog · 05-25-2014, 10:45 PM

I'm running 275r45/20 front and back thinkin about going tall on the back. What tire sizes are you running?

twisted1 · 05-26-2014, 10:46 AM

275/60/17 on the rear and 235/60/17 on the front

i would do a 315/35/20, but you will likely need a 10" wide wheel for that........you will need at least a 9-9.5 to go any larger than what you have and look right......just my opinion

grumpyolddog · 05-26-2014, 01:13 PM

Here it is with 275-45r20's all the way around with it lowered I cannot run a bigger tire on front but I might try a taller tire on the rear for the same look you have. The front is lowered with springs I like the look but the ride is not so good, but with my trailer on the back bumper the ride is great. I think I need to do more camping.

twisted1 · 05-26-2014, 07:38 PM

cant see the pics sir.......

grumpyolddog · 05-28-2014, 07:08 PM

Ok trying this again

aiRFLo · 05-30-2014, 07:25 PM

wow old thread I posted in years ago, well here's mine
4/6 Belltech on 20" LTZ

rotgg · 06-20-2014, 09:19 PM

my 05

50bomb · 07-14-2014, 08:46 PM

Mine again. Bought it lowered last Nov. It rides okay until I hit bumps and then the differenatial hits bed and tires rub. Needs to be airbagged so I can have best of both worlds. I love this truck though. Hope to have it forever.

mtm_seven · 07-29-2014, 12:31 PM

Here's my before and after. Sorry for the crappy pics - will do better next time

Before - 3" fabtech spindles and 2" rear blocks (lift)
After - 2/4 Maxtrac spindles in front and hangers / shackles in the rear.
Wheels - 2008 Chevy 18" with 265/60/18 Hancook

66redw/white · 12-21-2014, 01:42 PM

a couple more of mine. shes fresh out of the paint booth.

50bomb · 12-30-2014, 10:37 PM

Had front of my truck redone. WHoever owned it one time or another did a terrible job. Got it brought up an inch. Now it is a 4/7 drop. I like it alot.

cdrummer316 · 01-06-2015, 09:10 PM

My 2000 with a 4/7 drop.

50bomb · 01-31-2015, 11:22 AM

Quote:

Originally Posted by cdrummer316

My 2000 with a 4/7 drop.

Nice!!! Wish mine had all the factory trim and mirrors. PERFECT TRUCK!

cdrummer316 · 01-31-2015, 02:34 PM

Thanks. I've actually considered removing the factory trim and replacing the mirrors with black front instead of the chrome front.

910506chevy · 02-26-2015, 03:07 AM

Man I can't remember... Either a full coil or little over but I know at least a full coil

50bomb · 04-07-2015, 10:50 PM

Update on my 01 silverado. 6/9 drop with 17's

52mikey · 04-10-2015, 06:54 PM

02 sportside work truck with complete LS interior
2/4 with 275/55/20 tires

66redw/white · 05-20-2015, 10:22 PM

she got some paint!!

mike'swife · 08-02-2015, 09:10 PM

what is stock height?

chevellelover · 10-01-2015, 05:59 PM

My latest project 2001 GMC sierra SLE 4.8 auto
bone stock 1 owner truck when purchased
cam, stall and bolt on modifications
ls1 out of a 2000 camaro sitting on the stand for the truck
DJM 5/6 drop
Centerline sniper 20 x 8.5 245/45/20 in front 275/40 in rear
planning on keeping this one.

packsand · 10-04-2015, 10:52 AM

http://67-72chevytrucks.com/vboard/a...1&d=1443970292

JAG66 · 10-20-2015, 11:07 PM

1.5"/3"

66redw/white · 10-29-2015, 10:08 PM

hotrod 80 · 12-07-2015, 09:10 PM

This should be a sticky

427Carl · 01-01-2016, 03:55 PM

Name: IMG_5078.jpg
Views: 4887
Size: 80.1 KB

Name: IMG_5077.jpg
Views: 4501
Size: 103.8 KB

Name: IMG_5081.jpg
Views: 4862
Size: 67.9 KB

Name: IMG_5082.jpg
Views: 4456
Size: 91.5 KB

05-25-2014, 10:45 PM	#1
grumpyolddog Registered User Join Date: May 2011 Location: StThomas Ont. Canada Posts: 95	Re: offical lowered thread of standard cab pu, lets see them! I'm running 275r45/20 front and back thinkin about going tall on the back. What tire sizes are you running?

05-26-2014, 10:46 AM	#2
twisted1 Registered User Join Date: Mar 2014 Location: Belle Plaine KS Posts: 21	Re: offical lowered thread of standard cab pu, lets see them! 275/60/17 on the rear and 235/60/17 on the front i would do a 315/35/20, but you will likely need a 10" wide wheel for that........you will need at least a 9-9.5 to go any larger than what you have and look right......just my opinion

05-26-2014, 01:13 PM	#3
grumpyolddog Registered User Join Date: May 2011 Location: StThomas Ont. Canada Posts: 95	Re: offical lowered thread of standard cab pu, lets see them! Here it is with 275-45r20's all the way around with it lowered I cannot run a bigger tire on front but I might try a taller tire on the rear for the same look you have. The front is lowered with springs I like the look but the ride is not so good, but with my trailer on the back bumper the ride is great. I think I need to do more camping. Last edited by grumpyolddog; 05-26-2014 at 01:20 PM. Reason: no picture

05-26-2014, 07:38 PM	#4
twisted1 Registered User Join Date: Mar 2014 Location: Belle Plaine KS Posts: 21	Re: offical lowered thread of standard cab pu, lets see them! cant see the pics sir.......

05-28-2014, 07:08 PM	#5
grumpyolddog Registered User Join Date: May 2011 Location: StThomas Ont. Canada Posts: 95	Re: offical lowered thread of standard cab pu, lets see them! Ok trying this again Attached Images

05-30-2014, 07:25 PM	#6
aiRFLo Registered User Join Date: Feb 2011 Location: Covington, Wa. Posts: 24	Re: offical lowered thread of standard cab pu, lets see them! wow old thread I posted in years ago, well here's mine 4/6 Belltech on 20" LTZ

06-20-2014, 09:19 PM	#7
rotgg Registered User Join Date: Jan 2006 Location: al Posts: 233	Re: offical lowered thread of standard cab pu, lets see them! my 05 Attached Images __________________ http://www.facebook.com/pages/DB-Pro...86356804721497 https://twitter.com/dbproduction404

07-14-2014, 08:46 PM	#8
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: offical lowered thread of standard cab pu, lets see them! Mine again. Bought it lowered last Nov. It rides okay until I hit bumps and then the differenatial hits bed and tires rub. Needs to be airbagged so I can have best of both worlds. I love this truck though. Hope to have it forever. Attached Images __________________ Stovebolt-It is painted

07-29-2014, 12:31 PM	#9
mtm_seven Loading..... Join Date: Jan 2000 Location: Austin, Texas, USA Posts: 214	Re: offical lowered thread of standard cab pu, lets see them! Here's my before and after. Sorry for the crappy pics - will do better next time Before - 3" fabtech spindles and 2" rear blocks (lift) After - 2/4 Maxtrac spindles in front and hangers / shackles in the rear. Wheels - 2008 Chevy 18" with 265/60/18 Hancook Attached Images __________________ -M7 '69 SWB GMC 5.7 EFI ‘69 C/10 SWB patina survivor ‘71 K20 LWB GMC '72 K5 1-ton gear 468BB ‘79 K20 LWB GMC ‘86 K30 GMC High Sierra C&C Single Cab ‘94 LWB GMC 2500 4x4 '96 SWB Single Cab 5.7 ‘99 SWB Z71 Single Cab '01 K2500 Yukon Safari 6.0 ‘06 1500 LWB 4x4 5.3 ‘06 2500HD Single Cab C&C Duramax 4x4 '08 2500HD x-cab duramax 4x4 '11 2500HD Single Cab Duramax 4x4

12-21-2014, 01:42 PM	#10
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: offical lowered thread of standard cab pu, lets see them! a couple more of mine. shes fresh out of the paint booth. __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

12-30-2014, 10:37 PM	#11
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: offical lowered thread of standard cab pu, lets see them! Had front of my truck redone. WHoever owned it one time or another did a terrible job. Got it brought up an inch. Now it is a 4/7 drop. I like it alot. Attached Images __________________ Stovebolt-It is painted

01-06-2015, 09:10 PM	#12
cdrummer316 Registered User Join Date: May 2014 Location: Dallas, TX Posts: 10	Re: offical lowered thread of standard cab pu, lets see them! My 2000 with a 4/7 drop. Attached Images

01-31-2015, 02:34 PM	#14
cdrummer316 Registered User Join Date: May 2014 Location: Dallas, TX Posts: 10	Re: offical lowered thread of standard cab pu, lets see them! Thanks. I've actually considered removing the factory trim and replacing the mirrors with black front instead of the chrome front.

02-26-2015, 03:07 AM	#15
910506chevy Registered User Join Date: Jul 2011 Location: Rock Island TN. Posts: 90	Re: offical lowered thread of standard cab pu, lets see them! Man I can't remember... Either a full coil or little over but I know at least a full coil __________________ 91 Silverado 05 Silverado 06 TBSS

04-07-2015, 10:50 PM	#16
50bomb Registered User Join Date: Jul 2010 Location: Hemet,Ca Posts: 1,502	Re: offical lowered thread of standard cab pu, lets see them! Update on my 01 silverado. 6/9 drop with 17's Attached Images __________________ Stovebolt-It is painted



Register or Log In To remove these advertisements.

04-10-2015, 06:54 PM	#17
52mikey Registered User Join Date: May 2014 Location: Kent, Wa. Posts: 6	Re: offical lowered thread of standard cab pu, lets see them! 02 sportside work truck with complete LS interior 2/4 with 275/55/20 tires Attached Images

05-20-2015, 10:22 PM	#18
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: offical lowered thread of standard cab pu, lets see them! she got some paint!! __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

08-02-2015, 09:10 PM	#19
mike'swife Registered User Join Date: Jul 2011 Location: United States Posts: 4	Re: offical lowered thread of standard cab pu, lets see them! what is stock height?

10-01-2015, 05:59 PM	#20
chevellelover chevellelover Join Date: Nov 2008 Location: albuquqerque new mexico Posts: 88	Re: offical lowered thread of standard cab pu, lets see them! My latest project 2001 GMC sierra SLE 4.8 auto bone stock 1 owner truck when purchased cam, stall and bolt on modifications ls1 out of a 2000 camaro sitting on the stand for the truck DJM 5/6 drop Centerline sniper 20 x 8.5 245/45/20 in front 275/40 in rear planning on keeping this one. Attached Images __________________ 1978 Trans Am 400/4speed Year One Snowflakes 1980 c10 shortbed 1999 Suburban 5/7 drop US Mags Roadsters 1999 GMC Sierra Classic 4x4-MINT 2015 Challenger Scat Pack 6.4 8 Speed

10-04-2015, 10:52 AM	#21
packsand Registered User Join Date: Mar 2011 Location: Boise Id Posts: 80	Re: offical lowered thread of standard cab pu, lets see them! http://67-72chevytrucks.com/vboard/a...1&d=1443970292 Attached Images

10-20-2015, 11:07 PM	#22
JAG66 Registered User Join Date: Feb 2011 Location: Goldsboro, NC Posts: 179	Re: offical lowered thread of standard cab pu, lets see them! 1.5"/3"

10-29-2015, 10:08 PM	#23
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: offical lowered thread of standard cab pu, lets see them! __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

12-07-2015, 09:10 PM	#24
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: offical lowered thread of standard cab pu, lets see them! This should be a sticky __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

01-01-2016, 03:55 PM	#25
427Carl Registered User Join Date: Jul 2015 Location: Clinton On. Canada Posts: 52	Re: offical lowered thread of standard cab pu, lets see them!

Register or Log In To remove these advertisements.