Project Money green - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

04ls1gto · 10-21-2018, 07:54 AM

Quote:

Originally Posted by LockDoc

I would try "J" pipes on it before adding an "H" pipe. They quieted my Panel Truck right down. My wife wouldn't ride in it before the "J" pipes..... Also a lot cheaper than an "H" pipe.

LockDoc

I'll have to see if there is space to add h or j pipe. Mostly it's just to loud, my gto had the same issue and I added small resonators and it made it alot better. I'm sure it doesn't help that there is no sound deadining in the interior.

04ls1gto · 10-28-2018, 03:15 PM

Put resonaters on exhaust and it's much better. Went for a ride and when I got back the fans stopped working and got real hot in my driveway. Gonna chase a few things this week and hopefully get it figured out.

**LockDoc** · 10-28-2018, 05:47 PM

Quote:

Originally Posted by 04ls1gto

Put resonaters on exhaust and it's much better. Went for a ride and when I got back the fans stopped working and got real hot in my driveway. Gonna chase a few things this week and hopefully get it figured out.

Hope you get it figured out. Maybe the resonators resonated too much...

.... J/K

LockDoc

04ls1gto · 10-28-2018, 09:18 PM

Quote:

Originally Posted by LockDoc

Hope you get it figured out. Maybe the resonators resonated too much...

.... J/K

LockDoc

May have been the burnout...

04ls1gto · 11-04-2018, 05:47 PM

Took the boys out for donuts, ice cream and popsicles. Truck ran good, need some more sound deadening and I think I'm gonna change mufflers to a magnaflow 3 chamber from the straight through ones that are on it.

**Advanced Design** · 11-04-2018, 07:40 PM

Truck looks good and the boys look pretty happy!

04ls1gto · 12-15-2018, 09:39 AM

Picked up some Dakota digital gauges and got them installed. Very nice product and a easy install.

04ls1gto · 12-30-2018, 06:35 PM

Santa brought the burb some new marker lenses

**LockDoc** · 12-30-2018, 09:52 PM

Quote:

Originally Posted by 04ls1gto

Santa brought the burb some new marker lenses

Wow! You must have the Deluxe Santa, All I got was the standard ones....

Looks good!

LockDoc

04ls1gto · 12-30-2018, 10:20 PM

Quote:

Originally Posted by LockDoc

Wow! You must have the Deluxe Santa, All I got was the standard ones....

Looks good!

LockDoc

Truth be told I bought them, wrapped box and put it under tree

**LockDoc** · 12-31-2018, 10:24 AM

Quote:

Originally Posted by 04ls1gto

Truth be told I bought them, wrapped box and put it under tree

....

LockDoc

04ls1gto · 01-13-2019, 09:09 AM

Truck is back from getting Dyno tuned. Runs awsome. Made 330rwhp and 335rwtq, before you bash it's a very stingy mustang Dyno. Dyno owner says it runs about 23% lower then Dyno jet. It made a average of 298tq from 2300 -6000, very happy with results. I'll post graph shortly

04ls1gto · 05-29-2019, 08:34 PM

Update: installed the AAW harness and worked through some small issues. Truck is running really good and took it to the first car show about 45 minutes from the house. 75-80mph at 2000rpm.is really nice. Gonna work on getting some more sound deadening in and get AC lines installed.

04ls1gto · 05-29-2019, 08:36 PM

Apparently the sound of American v8 puts my kids to sleep

**LockDoc** · 05-29-2019, 11:16 PM

Quote:

Originally Posted by 04ls1gto

Apparently the sound of American v8 puts my kids to sleep

Good deal! Nice family pic. You must have worn the kids out at the show...

LockDoc

Average Joe · 06-03-2019, 03:58 PM

Quote:

Originally Posted by 04ls1gto

Truck is back from getting Dyno tuned. Runs awsome. Made 330rwhp and 335rwtq, before you bash it's a very stingy mustang Dyno. Dyno owner says it runs about 23% lower then Dyno jet. It made a average of 298tq from 2300 -6000, very happy with results. I'll post graph shortly

Bash???

Oh heck no! Thats some killer numbers in my book. That kinda power and mpg too? Well done sir.

04ls1gto · 06-03-2019, 05:03 PM

Quote:

Originally Posted by Average Joe

Bash???

Oh heck no! Thats some killer numbers in my book. That kinda power and mpg too? Well done sir.

Thanks, it's a blast to drive. Got right around 20mpg on our last trip. Gas mileage goes out to window when I let the wife drive, she loves the sound of exhaust!

**LockDoc** · 06-03-2019, 07:47 PM

Quote:

Originally Posted by 04ls1gto

Thanks, it's a blast to drive. Got right around 20mpg on our last trip. Gas mileage goes out to window when I let the wife drive, she loves the sound of exhaust!

Pedal to the metal.....

....

04ls1gto · 06-23-2019, 07:51 PM

Spent the last few weekends installing a hydro boost and new trailing arms. Hydro boost works great but was not impressed with directions or the fact that kit was missing fittings. Not sure if I'll buy from CPP again.

The ECE trailing arms was a great product and came with everything needed and the sales guy couldn't have been any more helpful. Truck rides great now and alot of the sounds from rear are gone now. My original trailing arms were separating and driver's side was cracked where u bolt went through. It was definitely time.

04ls1gto · 06-23-2019, 07:53 PM

Pics

**LockDoc** · 06-23-2019, 10:18 PM

-
Lookin' good! I have a pair of new trailing arms on the '72 Super frame. It makes everything go together quick.

LockDoc

04ls1gto · 09-02-2019, 08:43 PM

Made a trip to NC this weekend and picked up a very rust free suburban body with all the doors. Apparently the guy got it from a closed down body shop in Alabama. Had been sitting in the corner for 25+ years. Got the rear ac as well. Not sure if I'm going to us it for parts or swap entire body, gotta get it cleaned out and on the lift to see how solid it looks

04ls1gto · 09-25-2019, 06:22 PM

Vanity plate finally showed up, girl at the DMV had a good laugh

**KFF 1** · 09-29-2019, 06:22 PM

Love the vanity plate !

Average Joe · 10-01-2019, 04:52 AM

Quote:

Originally Posted by kff 1

love the vanity plate !

x2!

10-28-2018, 03:15 PM	#102
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Put resonaters on exhaust and it's much better. Went for a ride and when I got back the fans stopped working and got real hot in my driveway. Gonna chase a few things this week and hopefully get it figured out. Attached Images

11-04-2018, 05:47 PM	#105
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Took the boys out for donuts, ice cream and popsicles. Truck ran good, need some more sound deadening and I think I'm gonna change mufflers to a magnaflow 3 chamber from the straight through ones that are on it. Attached Images

11-04-2018, 07:40 PM	#106
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: Project Money green Truck looks good and the boys look pretty happy! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

12-15-2018, 09:39 AM	#107
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Picked up some Dakota digital gauges and got them installed. Very nice product and a easy install. Attached Images

12-30-2018, 06:35 PM	#108
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Santa brought the burb some new marker lenses Attached Images

01-13-2019, 09:09 AM	#112
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Truck is back from getting Dyno tuned. Runs awsome. Made 330rwhp and 335rwtq, before you bash it's a very stingy mustang Dyno. Dyno owner says it runs about 23% lower then Dyno jet. It made a average of 298tq from 2300 -6000, very happy with results. I'll post graph shortly

05-29-2019, 08:34 PM	#113
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Update: installed the AAW harness and worked through some small issues. Truck is running really good and took it to the first car show about 45 minutes from the house. 75-80mph at 2000rpm.is really nice. Gonna work on getting some more sound deadening in and get AC lines installed.

05-29-2019, 08:36 PM	#114
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Apparently the sound of American v8 puts my kids to sleep Attached Images

06-23-2019, 07:51 PM	#119
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Spent the last few weekends installing a hydro boost and new trailing arms. Hydro boost works great but was not impressed with directions or the fact that kit was missing fittings. Not sure if I'll buy from CPP again. The ECE trailing arms was a great product and came with everything needed and the sales guy couldn't have been any more helpful. Truck rides great now and alot of the sounds from rear are gone now. My original trailing arms were separating and driver's side was cracked where u bolt went through. It was definitely time.

06-23-2019, 07:53 PM	#120
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Pics Attached Images

06-23-2019, 10:18 PM	#121
LockDoc The Older Generation Join Date: Aug 2006 Location: Montezuma, Iowa Posts: 25,629	Re: Project Money green - Lookin' good! I have a pair of new trailing arms on the '72 Super frame. It makes everything go together quick. LockDoc __________________ Leon Locksmith, Specializing In Antique Trucks, Automobiles, & Motorcycles (My Dually Pickup Project Thread) http://67-72chevytrucks.com/vboard/s...d.php?t=829820 -

09-02-2019, 08:43 PM	#122
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Made a trip to NC this weekend and picked up a very rust free suburban body with all the doors. Apparently the guy got it from a closed down body shop in Alabama. Had been sitting in the corner for 25+ years. Got the rear ac as well. Not sure if I'm going to us it for parts or swap entire body, gotta get it cleaned out and on the lift to see how solid it looks Attached Images

09-25-2019, 06:22 PM	#123
04ls1gto Registered User Join Date: Aug 2014 Location: Portsmouth ri Posts: 363	Re: Project Money green Vanity plate finally showed up, girl at the DMV had a good laugh Attached Images

09-29-2019, 06:22 PM	#124
KFF 1 Senior Member Join Date: Sep 2018 Location: Belmont OH Posts: 294	Re: Project Money green Love the vanity plate !



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.