One-Man Cab & Bed Lift - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

franks72 · 04-04-2014, 07:37 AM

Just sent payment for one man cab lifter. Thanks

Rokcrln · 04-04-2014, 09:25 AM

All orders will ship out Saturday.
Thank you.
Kevin
LFD Inc.

**Clatterville trolley** · 04-04-2014, 02:04 PM

Quote:

Originally Posted by Rokcrln

All orders will ship out Saturday.
Thank you.
Kevin
LFD Inc.

Kevin, just sent PayPal for a set of plans for tilt and for lift both. Thanks, Jay

BrianV · 04-06-2014, 10:46 AM

Anyone ever try to lift a suburban body with one ( or two ) of these I was thinking one in the door as shown and then one in the rear doors?

Any thoughts

Brian

classicchev · 04-06-2014, 10:59 AM

That's a ton of weight, completely striped it would still be heavy. I would do it ,but like this one end at a time

BrianV · 04-06-2014, 11:10 AM

That was kinda my thought as we'll but I was thinking using them both at the same time but I agree with you on the weight issue

I think it would have to be a very slow and steady process and then roll the chassis out

I think I'm gonna order the plans and give it a shot!!

classicchev · 04-06-2014, 11:16 AM

I have one of the lifts, have used it for cabs and for boxes, I did not use it for the blazer. I would not use it to lift, too unstable, and I think it's easier just to use chains and straps.
I lifted a body off a 57 panel the same way, took me a couple hours after I stripped it

Hatzman · 04-07-2014, 08:12 PM

Just ordered a lift. Thanks!

*Barney 66* · 05-13-2014, 12:44 PM

Do you still make these kits?

djduggie · 10-16-2014, 10:15 PM

Hey Kevin, PayPal sent 9/28 for cab & bed lift plans. Thanks!

69chevytrucker · 10-17-2014, 12:03 AM

wish i took pics when i did mine i used straps on my box cris cross and picked up in the middle from the back cleared everything with cherry picker

mrdurden · 10-28-2014, 09:47 AM

Just ordered the lift and dolly plans...much thanks!

leuggy · 11-14-2014, 03:55 PM

would like to order plans bed/cab lift please PM me order details

Thanks Blaine

C10_ustacould · 12-27-2014, 11:22 PM

Would like to order cab/bed lift plans, still available?

**71CHEVYSHORTBED402** · 04-02-2015, 10:45 PM

I've never built with steel. What do you use to make the cuts? Thanks for any advise.

Rokcrln · 06-29-2015, 07:43 AM

Quote:

Originally Posted by 71CHEVYSHORTBED402

I've never built with steel. What do you use to make the cuts? Thanks for any advise.

The cheapest way is with an abrasive cut off saw or chop saw. You can even get a blade for a regular wood cutting skill saw but it is not real accurate. I now use a band saw for most of my metal tube or stock cutting but they are way more expensive to purchase but over time pay off with clean accurate cuts, no sparks and not as much noise.

Also these plans are now available in PDF E-files for faster delivery!

Kevin
LFD

Lokin4AReason · 06-29-2015, 08:51 AM

nice tool to have, but I ll have to find my truck 1st =0)

C10_ustacould · 06-29-2015, 08:52 AM

Quote:

Originally Posted by Bucks68

Would like to order cab/bed lift plans, still available?

Quote:

Originally Posted by Rokcrln

The cheapest way is with an abrasive cut off saw or chop saw. You can even get a blade for a regular wood cutting skill saw but it is not real accurate. I now use a band saw for most of my metal tube or stock cutting but they are way more expensive to purchase but over time pay off with clean accurate cuts, no sparks and not as much noise.

Also these plans are now available in PDF E-files for faster delivery!

Kevin
LFD

What is the cost for a set of both the lift and tilt plans in PDF format? And how do I order and pay? - Buck

Rokcrln · 06-29-2015, 10:10 AM

Quote:

Originally Posted by Bucks68

What is the cost for a set of both the lift and tilt plans in PDF format? And how do I order and pay? - Buck

It is $48.90 and you PayPal to rokcrln@pacbell.net then send an email to me at kevinl.pace@me.com with your shipping info and sets ordered. I'll confirm payment and email out normally same day.

Kevin
LFD

C10_ustacould · 06-29-2015, 10:43 AM

Quote:

Originally Posted by Rokcrln

It is $48.90 and you PayPal to rokcrln@pacbell.net then send an email to me at kevinl.pace@me.com with your shipping info and sets ordered. I'll confirm payment and email out normally same day.

Kevin
LFD

Will do thanks!

19SIKtySix · 09-03-2015, 05:00 PM

Quote:

Originally Posted by Rokcrln

One-Man Cab & Bed Lift
New From
Lewis Fabrication Design Inc.

I finished the plans and they are ready to ship out

Just like the "Tip & Flip Cab Dolly" it comes with material lists, cut lists and step by step build pic's with details. It is designed for standard cabs of all years and fleet side beds. It uses your engine hoist/cherry picker and is truly a one man job. How many times have you needed a hand and no one was around to give you a hand! When you are done it all slides inside it self for easy storage in the corner out of the way.

Plans are $19.95 and this includes shipping and tax. You can order you plans from the link in my Signiture below. If you have any questions please ask!

Kevin
LFD Inc.

Kevin,

Are these plans still available? I'm interested in the bed/cab lift plans? Could you provide payment amount and info, please? Thanks for your contributions!

Chuck Long

roOstersan · 09-09-2015, 06:14 AM

I just found this thread and it looks great! Will this work on an early 60s c10 as well? Can't see why not.

I'm local to you.. I'm on Vaca and my parents live in Winters... Small world!

Rokcrln · 11-03-2015, 04:53 PM

Yes they are still available and will work on any standard cab and fleet side bed. Step sides will work with some clamps ( not recommended on step side beds with good paint).
You can PayPal to rokcrln@pacbell.net and the price has dropped to $18.00!

Kevin
LFD

hugger6933 · 11-03-2015, 06:09 PM

I built a cab flipper just the other day using these plans. Top notch!!

Rokcrln · 11-03-2015, 09:52 PM

Quote:

Originally Posted by hugger6933

I built a cab flipper just the other day using these plans. Top notch!!

Thank you I appreciate your kind words!

I have used mine many times for so much more then it was built for. I've made brackets bolt to it then other items to make work easier. I'm glad to hear others getting use from it.

Kevin
LFD

04-04-2014, 07:37 AM	#101
franks72 Junior Member Join Date: Mar 2005 Location: Wilmington DE Posts: 218	Re: One-Man Cab & Bed Lift Just sent payment for one man cab lifter. Thanks __________________ 72 cheyenne super BB402 TH400 Air Tack Tilt Posi P/S P/B AM/FM 12.96 @ 101.82 mph 60ft 1.82 12.39 @111.33 With a 180 shot nos 69 Camaro RS http://s94.photobucket.com/albums/l117/fdelcoglin/ email fdelcoglin@hotmail.com

04-04-2014, 09:25 AM	#102
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: One-Man Cab & Bed Lift All orders will ship out Saturday. Thank you. Kevin LFD Inc.

04-06-2014, 10:46 AM	#104
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: One-Man Cab & Bed Lift Anyone ever try to lift a suburban body with one ( or two ) of these I was thinking one in the door as shown and then one in the rear doors? Any thoughts Brian

04-06-2014, 10:59 AM	#105
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: One-Man Cab & Bed Lift That's a ton of weight, completely striped it would still be heavy. I would do it ,but like this one end at a time Attached Images __________________ 67- 72 Parts collecter

04-06-2014, 11:10 AM	#106
BrianV Registered User Join Date: Mar 2010 Location: Mesa, Az Posts: 364	Re: One-Man Cab & Bed Lift That was kinda my thought as we'll but I was thinking using them both at the same time but I agree with you on the weight issue I think it would have to be a very slow and steady process and then roll the chassis out I think I'm gonna order the plans and give it a shot!!

04-06-2014, 11:16 AM	#107
classicchev Senior Member Join Date: Nov 2003 Location: Calgary Alberta Posts: 1,936	Re: One-Man Cab & Bed Lift I have one of the lifts, have used it for cabs and for boxes, I did not use it for the blazer. I would not use it to lift, too unstable, and I think it's easier just to use chains and straps. I lifted a body off a 57 panel the same way, took me a couple hours after I stripped it __________________ 67- 72 Parts collecter

04-07-2014, 08:12 PM	#108
Hatzman Registered User Join Date: Oct 2011 Location: Knoxville, TN Posts: 181	Re: One-Man Cab & Bed Lift Just ordered a lift. Thanks! __________________ Steve ___________________________________ http://67-72chevytrucks.com/vboard/s...d.php?t=618848

05-13-2014, 12:44 PM	#109
Barney 66 Account Suspended Join Date: Jan 2014 Location: san diego, California Posts: 130	Re: One-Man Cab & Bed Lift Do you still make these kits?

10-16-2014, 10:15 PM	#110
djduggie Registered User Join Date: Feb 2008 Location: Colorado Posts: 4	Re: One-Man Cab & Bed Lift Hey Kevin, PayPal sent 9/28 for cab & bed lift plans. Thanks! __________________ --------------------------------------- Doug

10-17-2014, 12:03 AM	#111
69chevytrucker Registered User Join Date: Apr 2014 Location: calgary alberta Posts: 1,248	Re: One-Man Cab & Bed Lift wish i took pics when i did mine i used straps on my box cris cross and picked up in the middle from the back cleared everything with cherry picker

10-28-2014, 09:47 AM	#112
mrdurden Registered User Join Date: Sep 2004 Location: Rio Rancho, NM Posts: 92	Re: One-Man Cab & Bed Lift Just ordered the lift and dolly plans...much thanks! __________________ '67 2wd LWB Fleetside '71 4wd LWB Fleetside

11-14-2014, 03:55 PM	#113
leuggy Registered User Join Date: May 2012 Location: moose jaw, sk Posts: 92	Re: One-Man Cab & Bed Lift would like to order plans bed/cab lift please PM me order details Thanks Blaine

12-27-2014, 11:22 PM	#114
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: One-Man Cab & Bed Lift Would like to order cab/bed lift plans, still available? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

04-02-2015, 10:45 PM	#115
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,292	Re: One-Man Cab & Bed Lift I've never built with steel. What do you use to make the cuts? Thanks for any advise. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

06-29-2015, 08:51 AM	#117
Lokin4AReason Registered User Join Date: Oct 2014 Location: somewhere . . . Posts: 969	Re: One-Man Cab & Bed Lift nice tool to have, but I ll have to find my truck 1st =0) __________________ dont want to hear excuses, i want to hear solution(s)



Register or Log In To remove these advertisements.

09-09-2015, 06:14 AM	#122
roOstersan Registered User Join Date: Aug 2012 Location: Vacaville, Ca Posts: 98	Re: One-Man Cab & Bed Lift I just found this thread and it looks great! Will this work on an early 60s c10 as well? Can't see why not. I'm local to you.. I'm on Vaca and my parents live in Winters... Small world!

11-03-2015, 04:53 PM	#123
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: One-Man Cab & Bed Lift Yes they are still available and will work on any standard cab and fleet side bed. Step sides will work with some clamps ( not recommended on step side beds with good paint). You can PayPal to rokcrln@pacbell.net and the price has dropped to $18.00! Kevin LFD

11-03-2015, 06:09 PM	#124
hugger6933 Registered User Join Date: Oct 2008 Location: Marianna Arkansas Posts: 7,279	Re: One-Man Cab & Bed Lift I built a cab flipper just the other day using these plans. Top notch!!

Register or Log In To remove these advertisements.