"Project 64"

[ruffrida2005]

I have a 4 series

[Chlsnk]

Nice build I too want to tray having my 20 inch daytons dipped and painted.

[ruffrida2005]

I just Hit 100 post.

well I bought a SD wishbone from Badboy007 that he was selling for $150 shipped. He's going to send it out tomorrow so I'll have it next week and I'll get to start working on the truck some more.

Plans I have for right now. The motor and trans is coming back out so I can run my fuel and brake lines. I'm going to figure out how I want to run my ebrake cables. I'm going with a floor mounted lever since I'm running buckets. Gonna hopefully get some help next weekend to get most of it nocked out. Also we have to build the cage for the fuel cell Then I'll start on running the air stuff.

[ruffrida2005]

Just to show yall what I bought. Hope it comes in soon.

[daverod]

Sweet , did you get the kit?

[ruffrida2005]

Yeah man the kit got here just like that. So I got on the CNC and made some new mounting brackets for the lower bars. Made all the mounting tabs, stripped the paint off that was crappy.

Gonna put some zerk fittings in the rod ends tomorrow at work.

I ordered some more 2X3 3/16 for the wishbone crossmember. Gonna cut it all up and hopefully start tacking it together tomorrow. I'll try get some pics tomorrow up of everthing I've made and done.

[Broke1]

nice work your doing

[ruffrida2005]

Thanks Broke and Welcome to the site. you need any help just ask away. You have a thread going?

[Broke1]

yes i do but only a few pictures and i dont know how to link it

[creep]

Your truck is gonna lay frame, what the heck do you need an e-brake for?

[ruffrida2005]

Hey broke when you go to your thread, just copy and paste the address on mine. And when you get a chance you can go to your user CP and go to your sig and post it on there as well.

Creep I was thinking that in TX you have to have one. I thought I saw it somewhere on the DMV site but I may be wrong. I'll have to look again.

[Broke1]

here it is thanks for the help
http://67-72chevytrucks.com/vboard/s...d.php?t=383205

[jason65]

Nice hardware Paul. Can't wait to see it installed.

[ruffrida2005]

thanks for the pics. Looks to be about in the same shape as mine.

[Broke1]

yea after i looked at it i knew you wouldn't won't it lol

[ruffrida2005]

What is he doing with it.

I hope to have some pics to post this weekend. Maybe my sim card will work in my laptop.

[Alan's Classic]

Nice parts

[ruffrida2005]

The suspension parts I got. I'm not going to use. I cut the ends off them and I'm going to make the bars longer. They were too short and I couldn't get the angles that I wanted. Waiting on the chow saw this weekend to build another crossmember so I can start mounting stuff.

[ravens65]

Hey man, how low are you going? Cut up good parts like that. At least you got the nad's to do that! I had to swap cabs on my truck also and a few other parts. but its quicker to tell you what I kept. I only kept the frame, bellhousing, spindles, rear trailing arms and believe it or not the ignition switch. that truck should have a E-bay sticker on it! My front and rear fenders still smell like rice! Sent you more of that grinder art I've been doing

[ruffrida2005]

that looks sweet man

[ruffrida2005]

Scott this is what I'm looking for. http://www.4x4wire.com/toyota/tech/cvmod/ I'll give you a call monday to see if you can get it.

[scotts62]

Ah ok i see know, get ready to pay for those bad boys they are not cheap, are you running that to get more angle on your driveline or what?

[ruffrida2005]

well you know i"m running the SD raised crossmember. I'm sitting at 6* down. I dont want to raise it up because it will get in the way of the exhaust, and I dont want to cut the hell out of my tunnel. Nate PB said that is what he runs on his trucks with no problem. But he hasn't got back to use with part numbers and where he gets his from.

[PBFAB.COM]

Originally Posted by ruffrida2005

well you know i"m running the SD raised crossmember. I'm sitting at 6* down. I dont want to raise it up because it will get in the way of the exhaust, and I dont want to cut the hell out of my tunnel. Nate PB said that is what he runs on his trucks with no problem. But he hasn't got back to use with part numbers and where he gets his from.

Post #77 and #86 of the following thread will be what you need!

http://67-72chevytrucks.com/vboard/s...nt#post3038944

[scotts62]

Well hey there you go

We could build you what ever you wanted but it might be better to find a drive line shop around your area just to save on the shipping costs. Search Inland Truck Parts thats where i work and there are a couple in Texas, if you dont have a shop around your area that does drive shafts.