My 57 build (lots of pictures)

[hotrodrookie]

I made this dash extension out of some stainless, its not done yet but you get the idea.

[dennis57]

Originally Posted by hotrodrookie

I made this dash extension out of some stainless, its not done yet but you get the idea.

I saw your dash extension a few weeks ago and it got me thinking about something for my truck.

[Kim57]

The dash looks great.
Kim

[Kabwe]

Looking great, keep up the good work

[ChuckDriver]

Nice art work! I've also been thinking about putting something on the doors of mine. I'd like to do something with a flying/airplane theme. Did you get the "donor" we spoke about?

[dennis57]

Originally Posted by ChuckDriver

Nice art work! I've also been thinking about putting something on the doors of mine. I'd like to do something with a flying/airplane theme. Did you get the "donor" we spoke about?

I am supposed to get it Saturday. I'll post up pictures if it happens.

[dennis57]

I'm making room for my donor car so I went to Lowe's and spent $75 on wood and casters. I made a new tool to pick up the cab. I got the idea for this tool from 1-ton of fun here on the board. And wood and casters to make a stand to sit the cab on so I can move it around.

This one works great.

Ahhhh, mobile

[dennis57]

The donor arrived today . 85 Vette, 73k miles, auto. $2,500. Runs and drives good. Most everything seems to work too.

The wife took it for one last drive.

[Dan in Pasadena]

"Chewy" Thats so damned funny. An EXCELLENT name for a Lab as you (and anyone whose ever had one) well knows.

My dog is 5-1/2 now and I couldn't ask for a better dog. He loves to ride on my Jet Ski's. He's super intelligent...but until he was 2 he came THIS CLOSE to getting tossed. He chewed everything. If he brushed against a shrub in the yard and it moved? He chewed the hell out of it.

The topper was the plastic cover for the Euro style long license plate recess in my girlfriend's then-new Audi TT. The U.S. plate was screwed to it so he pulled it off the car and chewed the CRAP out of it in the backyard. She wanted to give him away.....I gave HER away! Afterall, Dog is MAN's best friend, not woman's. Best to you, love your truck. Dan

[dennis57]

OK, I'm getting my build back on track after a small detour. I was having a lot of problems trying to select some seats that I liked. After buying the donor Vette I decided to see how it's seats looked in the truck. After spending a bunch of time mocking up different heights I built a seat frame today and got them installed. The frame is roughed in but I think it will work. I am going to get some electric seat track to put under these seats later on. I am also going to cut off the headrest and reshape the back foam then reglass the back of the bucket to fit. With the head rest off you won't see the seats through the window.

[nuke1]

nice truck you have, wish i could find a donor car like that cheap around here, never happen up here.

[ChuckDriver]

Nice work! Can you incorporate the 'vette console into your dash idea? The seats will definetly look better once you cut them down so they can't be seen through the glass!

[dennis57]

Originally Posted by ChuckDriver

Nice work! Can you incorporate the 'vette console into your dash idea? The seats will definetly look better once you cut them down so they can't be seen through the glass!

Thanks! I might look at using the shifter but the console will be sheet metal.

[dennis57]

Not much progress lately I've been busy with other things this last week but I did mock up the console and I'm happy with this configuration. I'll try and pickup some metal to start building the frame work next week.

[Dan in Pasadena]

Whew, that console takes up a lot of room. What are your plans for the console? Any storage space inside it? If so, how will it be accessed? Where/style of door to get into it? Gauges? Maybe an old style vertical Vette radio/stereo?

[marc70chevy]

I just read your whole thread, you have done a lot of work on it and it looks amazing so far. With your center console being so high that is also good for another reason than just looks. I don't know how low your going to go with the suspension, but you could cut the floor pan where the transmission is and driveshaft then rebuild it back around it for more clearence. And no one would even know because it would be under your center console.

[dennis57]

Originally Posted by Dan in Pasadena

Whew, that console takes up a lot of room. What are your plans for the console? Any storage space inside it? If so, how will it be accessed? Where/style of door to get into it? Gauges? Maybe an old style vertical Vette radio/stereo?

Originally Posted by marc70chevy

I just read your whole thread, you have done a lot of work on it and it looks amazing so far. With your center console being so high that is also good for another reason than just looks. I don't know how low your going to go with the suspension, but you could cut the floor pan where the transmission is and driveshaft then rebuild it back around it for more clearence. And no one would even know because it would be under your center console.

Thanks guys. I was thinking about using the heat and AC evap out of the vette and build those into the console. I don't want the AC unit to be seen hanging out from under the dash. I plan to build a tube frame to support everything and as you can see the top will be sheet metal but the sides will be removable panels that will most likely be covered with leather.

Marc, I'm going to at least use the front suspension off of the Vette but I haven't made up my mind about the rear. I'd like to bag it and I'm not sure how well the Vette rear suspension will work with bags. I like to have the ability to drop the truck to the rockers. I haven't given any thought to raising the floor to allow the engine and trans to sit higher in the frame.

[Dan in Pasadena]

Originally Posted by dennis57

Thanks guys. I was thinking about using the heat and AC evap out of the vette and build those into the console. I don't want the AC unit to be seen hanging out from under the dash. I plan to build a tube frame to support everything and as you can see the top will be sheet metal but the sides will be removable panels that will most likely be covered with leather.

Very smart. I would use the Vette HVAC system if you can. It could possibly save you a bunch of money, not to mention improved looks inside the truck

Originally Posted by dennis57

...I haven't made up my mind about the rear. I'd like to bag it and I'm not sure how well the Vette rear suspension will work with bags. I like to have the ability to drop the truck to the rockers. I haven't given any thought to raising the floor to allow the engine and trans to sit higher in the frame.

I love the way a chromed out Vette independent rear suspension looks. I don't know if that is truly possible given your goal is to drop it so low.

I'm very interested to see how this truck comes out. You've mentioned painting it green a couple of times. Do you have a specific color or color combo in mind yet?

[ChuckDriver]

Dennis, Have you seen this months Classic Trucks yet? There's a Cameo with the same dash treatment!

[Bigblue29]

I thought of YOUR truck when I saw that! Definately something to strive to. But it looks like you'll get there.

[ChuckDriver]

I really like the way the dash V's were carried over to the seats!

[marc70chevy]

Originally Posted by ChuckDriver

I really like the way the dash V's were carried over to the seats!

i was just thinking that

[dennis57]

I got past a major stumbling block today . When I bought the truck it came with a NM title so I figured no problems, Oh was I wrong. It has taken almost 3 months to get this thing registered. But today it's finally done and a fresh title in my name.

[Roadkill58]

Originally Posted by dennis57

I got past a major stumbling block today . When I bought the truck it came with a NM title so I figured no problems, Oh was I wrong. It has taken almost 3 months to get this thing registered. But today it's finally done and a fresh title in my name.

dennis57, I bought the 58 GMC out of state. I pulled the motor (bare block),
and trans, drivers door, bed and hood before I trailered it to DMV just in case they might want to keep it. Kalifornia DMV said the truck needed to be finished before they would do VIN verification. I told them that was stupid, and why would anyone spend time, and money if they weren't sure the truck would pass verification. To make a short story long I trailered the gutted 58 to a CHP office, but had to make an appointment. One month later I returned with the truck. The CHP inspector said normaly the truck should be finished, but since it was a classic with original frame (except for chevelle front suspension), and not many left he did the verification. The other reason he did the verification was the number plate had the original rivets,
and was in good shape. Whew! Now I still have to go to DMV and deal with them (different office this time). Back in the day when I was registering a 48 I spent an hour sweating it out in a DMV special investigators office. I'ts not fun dealing with DMV. The things we have to do just to enjoy our trucks.

[jjjmm56]

All right Now get back to work!!!