ls turbo build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ford Assassin · 03-31-2013, 04:35 PM

Quote:

Originally Posted by 85burb

Have you seen this?

http://www.performancetrucks.net/for...k-kits-514181/

That is intended to work with the AC compressor in the stock location.

That will place the turbo in the exact same spot the AC compressor when using the Kwik Performance/Vintage Air bracket.
Posted via Mobile Device

prostreet1967 · 03-31-2013, 04:40 PM

I'm gonna mount mine in the middle up front. If camaro guys can surely I can. Gonna run. 76mm for a while with truck manifolds. What size is your turbo?
Posted via Mobile Device

69trk · 03-31-2013, 05:19 PM

bw s475 t6 flange. Ill look into a ac bracket that will hold the ac compressor mid mount...

Wasted Income · 04-01-2013, 10:08 AM

Quote:

Originally Posted by prostreet1967

I'm gonna mount mine in the middle up front. If camaro guys can surely I can. Gonna run. 76mm for a while with truck manifolds. What size is your turbo?
Posted via Mobile Device

Easier said than done. Have you actually set the turbo in between the engine and radiator? I have. It didn't fit.

prostreet1967 · 04-01-2013, 10:25 AM

no i havent yet. just figured if camaro guys can we should be able too. been kinda worrying about my turbo being so heavy i was wondering how to mount it. my turbo ended up being a 88mm. its a little to big but got it cheap so will try it.

sorry 69trk not trying to hijack. i will be following the build.

prostreet1967 · 04-01-2013, 01:33 PM

http://www.theturboforums.com/thread...-1970-c10-s475

ck this out, i like how he ran his merge and his mounting of the turbo.

Ford Assassin · 04-01-2013, 03:01 PM

Quote:

Originally Posted by prostreet1967

http://www.theturboforums.com/thread...-1970-c10-s475

ck this out, i like how he ran his merge and his mounting of the turbo.

Still wont clear aftermarket AC compressor placement.
Posted via Mobile Device

Wasted Income · 04-01-2013, 04:07 PM

Quote:

Originally Posted by Ford Assassin

Still wont clear aftermarket AC compressor placement.
Posted via Mobile Device

No, but mine will

prostreet1967 · 04-01-2013, 05:21 PM

Quote:

Originally Posted by 69trk

Look at all the room in front of the engine... Turbo should be fairly easy

How far back is the engine? Thinking bout sliding mine back as far as possible

69trk · 04-01-2013, 10:39 PM

Quote:

Originally Posted by Wasted Income

No, but mine will

Could you make me one of those ac compressor brackets?

Wasted Income · 04-02-2013, 09:20 AM

Quote:

Originally Posted by 69trk

Could you make me one of those ac compressor brackets?

I didn't have time to make the setup myself. I got the brackets from a guy on LS1tech that goes by fox12303

It's about 3x the cost of the Kwik setup, but worth it for my application...IMO.

aaronr · 04-15-2013, 11:33 PM

I'm currently building a twin turbo set for my 67 chevy truck.

69trk · 04-22-2013, 08:32 PM

Installed my wilsons 90mm throttlebody. Had to make a wheel bracket for the throttle cable to work. Installed the starter, alternator and most of the hydraboost unit. Finally received all my guages so I can start back to wiring the truck.
Posted via Mobile Device

69trk · 05-19-2013, 07:18 PM

Finishing up the wiring harness. Also installed the fuel rails and 120lb injectors. Finished the dash and guages. Making some progress very slowly....
Posted via Mobile Device

prostreet1967 · 05-19-2013, 07:31 PM

Looking good been wondering how your project was coming sinc I'm just collecting parts
Posted via Mobile Device

mcbassin · 06-17-2013, 04:07 PM

Very cool project! Love the plans for this one. Subscribed....

craig7070 · 07-24-2013, 01:26 PM

Subscribed...Great Job and Info so far

69trk · 07-24-2013, 10:32 PM

Thanks. My dad passed away last month and I have alot to do. Just sold his 41 to help put my mom in a home.. sucks

when I have any free time I work on my old truck. About to finish the fuel lines. Then finish mounting the computer and wiring harnesses..
Posted via Mobile Device

craig7070 · 07-25-2013, 04:06 PM

Quote:

Originally Posted by 69trk

Thanks. My dad passed away last month and I have alot to do. Just sold his 41 to help put my mom in a home.. sucks

when I have any free time I work on my old truck. About to finish the fuel lines. Then finish mounting the computer and wiring harnesses..
Posted via Mobile Device

Sorry for your loss....

**Hart_Rod** · 07-25-2013, 04:10 PM

Condolences to you and your family.

69trk · 07-28-2013, 11:18 AM

Got the ronfrancis wiring all installed and everything works except for the dome light when i open the doors

I also got the fuel lines finished, just need to buy a couple gallons of gas and cycle the fuel thru the filter to make sure everything is clean.... Then i'll plug the oil feed and return so i can put some oil in it and crank it to lubricate the engine.... next thing is ordering my ac system and installing radiator and mounting ecu and running the holley hp wiring.... slowly getting there... I would upload pics but for some reason all my file types are to large even after i shrink them...

69trk · 08-20-2013, 08:43 PM

Trying to post pics. Mounting ecu in center console.
Posted via Mobile Device

69trk · 08-20-2013, 08:51 PM

Trying to figure out how to mount intercooler. Looks like I will have to modify inner grill in order for ac condensor to fit..
Posted via Mobile Device

69trk · 08-20-2013, 08:59 PM

Engine bay is starting to look pretty good. Need a few more sensors and plug wires and im buying the holley coil covers..
Posted via Mobile Device

mcbassin · 08-20-2013, 10:50 PM

Hey, sorry to hear about your dad and Mom. The engine bay looks great. Keep the updates coming.

03-31-2013, 04:40 PM	#102
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: ls turbo build I'm gonna mount mine in the middle up front. If camaro guys can surely I can. Gonna run. 76mm for a while with truck manifolds. What size is your turbo? Posted via Mobile Device

03-31-2013, 05:19 PM	#103
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build bw s475 t6 flange. Ill look into a ac bracket that will hold the ac compressor mid mount... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

04-01-2013, 10:25 AM	#105
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: ls turbo build no i havent yet. just figured if camaro guys can we should be able too. been kinda worrying about my turbo being so heavy i was wondering how to mount it. my turbo ended up being a 88mm. its a little to big but got it cheap so will try it. sorry 69trk not trying to hijack. i will be following the build.

04-01-2013, 01:33 PM	#106
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: ls turbo build http://www.theturboforums.com/thread...-1970-c10-s475 ck this out, i like how he ran his merge and his mounting of the turbo.

04-15-2013, 11:33 PM	#112
aaronr Registered User Join Date: Jun 2007 Location: PHX. AZ Posts: 13	Re: ls turbo build I'm currently building a twin turbo set for my 67 chevy truck. __________________ 67-C10 under construction 2002 ECSB Chevy 5.3l with t-70 turbo 216/218 114lsa and 4l80E Built trans w/ 2500 stall

04-22-2013, 08:32 PM	#113
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Installed my wilsons 90mm throttlebody. Had to make a wheel bracket for the throttle cable to work. Installed the starter, alternator and most of the hydraboost unit. Finally received all my guages so I can start back to wiring the truck. Posted via Mobile Device Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

05-19-2013, 07:18 PM	#114
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Finishing up the wiring harness. Also installed the fuel rails and 120lb injectors. Finished the dash and guages. Making some progress very slowly.... Posted via Mobile Device Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

05-19-2013, 07:31 PM	#115
prostreet1967 Registered User Join Date: Oct 2006 Location: fort worth texas Posts: 395	Re: ls turbo build Looking good been wondering how your project was coming sinc I'm just collecting parts Posted via Mobile Device

06-17-2013, 04:07 PM	#116
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: ls turbo build Very cool project! Love the plans for this one. Subscribed.... __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

07-24-2013, 01:26 PM	#117
craig7070 Registered User Join Date: Jul 2013 Location: Roseville, CA Posts: 167	Re: ls turbo build Subscribed...Great Job and Info so far __________________ 1972 C10 Custom Deluxe 2 Owner Project "Lumberjack" 83K Original miles Work in progress....Got the truck for free all original

07-24-2013, 10:32 PM	#118
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Thanks. My dad passed away last month and I have alot to do. Just sold his 41 to help put my mom in a home.. sucks when I have any free time I work on my old truck. About to finish the fuel lines. Then finish mounting the computer and wiring harnesses.. Posted via Mobile Device __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

07-25-2013, 04:10 PM	#120
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: ls turbo build Condolences to you and your family. __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

07-28-2013, 11:18 AM	#121
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Got the ronfrancis wiring all installed and everything works except for the dome light when i open the doors I also got the fuel lines finished, just need to buy a couple gallons of gas and cycle the fuel thru the filter to make sure everything is clean.... Then i'll plug the oil feed and return so i can put some oil in it and crank it to lubricate the engine.... next thing is ordering my ac system and installing radiator and mounting ecu and running the holley hp wiring.... slowly getting there... I would upload pics but for some reason all my file types are to large even after i shrink them... __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

08-20-2013, 08:43 PM	#122
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Trying to post pics. Mounting ecu in center console. Posted via Mobile Device Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

08-20-2013, 08:51 PM	#123
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Trying to figure out how to mount intercooler. Looks like I will have to modify inner grill in order for ac condensor to fit.. Posted via Mobile Device Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81



Register or Log In To remove these advertisements.

08-20-2013, 08:59 PM	#124
69trk Registered User Join Date: Oct 2006 Location: bridgecreek ok. Posts: 1,214	Re: ls turbo build Engine bay is starting to look pretty good. Need a few more sensors and plug wires and im buying the holley coil covers.. Posted via Mobile Device Attached Images __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=494388 431 big block times, changed to a 6.0 ls with turbo 1.58- 60' 7.18- 1/8th mile@95.18 11.37- 1/4 @115.81

08-20-2013, 10:50 PM	#125
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: ls turbo build Hey, sorry to hear about your dad and Mom. The engine bay looks great. Keep the updates coming. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.