The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1988 - 1998 GMT400 Chevy & GMC Pickups Message Board > projects and builds 88-98

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-14-2017, 08:59 AM   #101
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

I have been following elsewhere about spraying the trim charcoal/black combo. My cabin roof lining is slowly coming down, so was looking at retrimming it in charcoal to match. Just got to find where to get new seat covering to match.
Terrick down Under is offline   Reply With Quote
Old 07-16-2017, 12:32 PM   #102
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Getting a little done today. To make sure sure the sound deadener sticks well I wash the floor well then go back over with windex. Half done, cooling off, then back at it.
Attached Images
  
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 07-16-2017, 04:17 PM   #103
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Done for the day. Just need some aluminum tape for the seams, pick up some padding and install a carpet. I may put my headliner up before the carpet, but I've got to recover it first.
Attached Images
  
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 07-16-2017, 05:53 PM   #104
OutlawDrifter
Registered User
 
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,783
Re: 97 3500 454 4x4 project

Nice work!
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E
1991 Z/28, 6.0L/T56
1949 GMC 250, S10 Frame, 6.0L/4L80E

Instagram @aceshighspeedshop
OutlawDrifter is offline   Reply With Quote
Old 07-19-2017, 08:10 AM   #105
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

Hey, before you start to reinstall the plastic trim at the rear, could you take some pics of the tabs and clips please. I will need to get mine out without damage because there is none around here.
Terrick down Under is offline   Reply With Quote
Old 07-19-2017, 08:37 AM   #106
95 S_Trucker
Registered User
 
95 S_Trucker's Avatar
 
Join Date: Oct 2009
Location: .
Posts: 2,187
Re: 97 3500 454 4x4 project

Very nice, I regret not laying down some sound/thermal insulation when I swapped interiors in my crew cab.
95 S_Trucker is offline   Reply With Quote
Old 07-19-2017, 12:23 PM   #107
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by 95 S_Trucker View Post
Very nice, I regret not laying down some sound/thermal insulation when I swapped interiors in my crew cab.
Thanks! I can definitely tell it doesn't have the empty tin can sound when I rap on the roof, back, or floors. I still have plenty to do the inside of my doors as well, so I'll have that up too. I'm back on nights this week so I may be Monday before I get back at it.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 07-19-2017, 12:49 PM   #108
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by Terrick down Under View Post
Hey, before you start to reinstall the plastic trim at the rear, could you take some pics of the tabs and clips please. I will need to get mine out without damage because there is none around here.
There are three screws here, very easy to get to from the front, in the top pic. On the bottom pic you can see a plastic tab and a metal clip on the backside, use my pen and the speaker grill as a reference.
Attached Images
  
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496

Last edited by mingoman; 07-19-2017 at 01:01 PM.
mingoman is offline   Reply With Quote
Old 07-19-2017, 01:00 PM   #109
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

But before you get the pillar trim you have to take the top back trim off. There are two screws for the dome light and two on the far corners, sorry about the sideways pic.. There are also three clips at the very back, these are tricky, probably the most easily broken so be careful here. Good luck and let me know if you need anything else.
Attached Images
   
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 07-19-2017, 05:25 PM   #110
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

Mate, that's fantastic. I recon I can do that. Just those couple of pics make it so that I am not delving in blind and that makes it sooo much easier. I will try and make a tool to get to those tabs without breaking them, at least to assist. Thanks heaps.
Terrick down Under is offline   Reply With Quote
Old 07-19-2017, 05:41 PM   #111
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by Terrick down Under View Post
Mate, that's fantastic. I recon I can do that. Just those couple of pics make it so that I am not delving in blind and that makes it sooo much easier. I will try and make a tool to get to those tabs without breaking them, at least to assist. Thanks heaps.
Terrick,
The middle trim may also have to come off, night shift brain is foggy at times, and of course the sill cover and seat belt screw will have to be taken off. I'm about to head in to work, but I'll check tomorrow and get picks of the middle trim clips if it needs to come off too.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 07-19-2017, 05:46 PM   #112
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

Man, that is soo cool. THANKS HEAPS!!
Terrick down Under is offline   Reply With Quote
Old 07-21-2017, 02:21 PM   #113
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Terrick,
You may be able to slide the pillar trim out, but here are the clip locations for the middle back trim. The ones along the lower bottom of the trim should pop out first, then the ones that face down from the top.
Attached Images
  
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 07-21-2017, 08:41 PM   #114
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

This is soo cool, i have started to save all these pics so i can get it done as soon as i get all my stuff ready.
Have started to try and get some factory style new coverings from the front and back seats that i have got for it, i think they are out of a 98. I will post some pics next week on my page.
Better run, going on a boat cruise up the Yarra river in Melbourne with the other people from the pump conferance that DW and i are attending.
Thanks again for all the info.
Terrick down Under is offline   Reply With Quote
Old 07-22-2017, 05:11 AM   #115
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by Terrick down Under View Post
This is soo cool, i have started to save all these pics so i can get it done as soon as i get all my stuff ready.
Have started to try and get some factory style new coverings from the front and back seats that i have got for it, i think they are out of a 98. I will post some pics next week on my page.
Better run, going on a boat cruise up the Yarra river in Melbourne with the other people from the pump conferance that DW and i are attending.
Thanks again for all the info.
Glad I could help. I'll be looking for your pictures.
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 08-09-2017, 05:17 PM   #116
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Time for the headliner. It wasn't just horrid, but sagged in a few spots, had a few tears, and was full of dirt. Job number 1 was to pull the old fabric off then the foam off. I had to use a small wire wheel to get the foam off. If you do be very light with it so as not to gouge the board.
Attached Images
  
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 08-09-2017, 05:23 PM   #117
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

I bought 6.5 feet of grey fleece from wal mart and 2 cans of 3m77. I laid the fabric out till I was happy with it then folded it over to do one half at a time. Sprayed the fabric and board, let them get tacky and smoothed it out with just my hands. Still have to trim it out, but turned out nice.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 08-09-2017, 06:51 PM   #118
Wide Open
Registered User
 
Join Date: May 2016
Location: Ohio
Posts: 274
Re: 97 3500 454 4x4 project

Nice work!
Posted via Mobile Device
Wide Open is offline   Reply With Quote
Old 08-13-2017, 06:06 PM   #119
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

Hey, I am loving this, its just like a tutorial on "what to do next!" Usually I love working with steel, but I think from what you have posted I can do this. Hopefully when it gets warmer I will start. thanks again
Terrick down Under is offline   Reply With Quote
Old 09-02-2017, 05:03 PM   #120
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Here's another idea I got from 88gmc. I'm adding a set of 6.5 speakers to the back doors and I've took the 4x6 pillar speakers apart and added a set of tweeters to them. The magnets on the old 4x6's popped out easy and I placed the tweeters in the leftover bracket. I plan on soldering these to the factory tabs so I can plug them up with the existing factory connectors.
I also have my mirror, have to install and run a harness for the temperature sensor still. I found a temp, comp, auto dim last week.
I think the overtime may be slowing down so hope to show a little progress in the coming weeks. Later all.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 09-02-2017, 05:54 PM   #121
Terrick down Under
Registered User
 
Terrick down Under's Avatar
 
Join Date: May 2013
Location: Royalla, NSW, Australia
Posts: 184
Re: 97 3500 454 4x4 project

Gunna try and fit a 32" led 1080w light bar behind the grill today....wish me luck.
Terrick down Under is offline   Reply With Quote
Old 09-02-2017, 06:37 PM   #122
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Quote:
Originally Posted by Terrick down Under View Post
Gunna try and fit a 32" led 1080w light bar behind the grill today....wish me luck.
No good without a pic lol!
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 09-05-2017, 12:50 PM   #123
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Taped all my seams in the rattle trap today, that's more tedious than putting it in. Installed the duct work for the rear vents and started on my mirror. The old one only had a comp while my new one displays temp and comp and is auto dimming. I have to make a mount for the sensor and run wires to the new mirror. I'll also have to look up a diagram to since the old mirror had 3 wires the new 7.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 09-08-2017, 03:29 PM   #124
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Worked off this morning, got a nap and got at it. Mirrors in and wired up. I fed my wires through the fan loom and that was slow going. Works great too btw!
Have my carpet in the truck, but I'll let it set a few days before I trim it out.
Going to the Hog tcu game tomorrow so it'll be Monday at least.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Old 09-08-2017, 04:18 PM   #125
mingoman
Registered User
 
Join Date: May 2004
Location: Miss Co Arkansas
Posts: 679
Re: 97 3500 454 4x4 project

Since I had the soldering iron out for my mirror harness, I did my infinity tweeters. I soldered them to the factory connectors so I could just plug them in.
Attached Images
 
__________________
76/77/78 Cheyenne
1997 K3500 454 soon to be 496
mingoman is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 10:40 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com