Power Brake Booster Adapter Bracket - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**argonaut** · 12-31-2011, 03:13 AM

Captainfab,
I'm planning to run a hydraulic clutch on my 66 K10, and I already have an 8" double diaphragm booster from CPP. Can you make one of these 63-66 brake booster adapter brackets with the back plate that will allow me to mount a clutch master cylinder similar to the way it is done on your 60-62? it looks like the 60-62 version would work with two additional holes drilled in the original master mount location. Let me know, thanks.

**Captainfab** · 12-31-2011, 12:48 PM

Yes that can be done. I have done a few in the past, but I don't currently have those parts in stock. I will need to order some parts laser cut for those, which will take about a week to get done. Let me know and I can get those ordered on Tuesday morning.

Quote:

Originally Posted by argonaut

Captainfab,
I'm planning to run a hydraulic clutch on my 66 K10, and I already have an 8" double diaphragm booster from CPP. Can you make one of these 63-66 brake booster adapter brackets with the back plate that will allow me to mount a clutch master cylinder similar to the way it is done on your 60-62? it looks like the 60-62 version would work with two additional holes drilled in the original master mount location. Let me know, thanks.

**argonaut** · 01-03-2012, 04:44 PM

Captain,
Thanks for the confirmation that you can do the bracket. I might not be ready for it until next month. I'm planning the build right now and want to make sure i have everything covered. I will send you a PM when I am ready for it.

**Captainfab** · 01-04-2012, 12:26 AM

OK, just let me know. I think I am going to go ahead and get a couple of these cut next time I place and order in that thickness. So I should have the parts, when you decide.

Quote:

Originally Posted by argonaut

Captain,
Thanks for the confirmation that you can do the bracket. I might not be ready for it until next month. I'm planning the build right now and want to make sure i have everything covered. I will send you a PM when I am ready for it.

NewRevNorton · 03-13-2012, 10:44 PM

Bracket ordered!

lee64 · 03-16-2012, 07:57 AM

Hi, Pretty new to the site but not the trucks. Got my 4th one recently. 64 short bed, stepside. Yours is the first bracket ive seen available. Still meking them? How do I go about ordering one. lee64

**Captainfab** · 03-16-2012, 11:38 PM

Yes these are available on a continual basis. I'll send you a PM with payment info.

Quote:

Originally Posted by lee64

Hi, Pretty new to the site but not the trucks. Got my 4th one recently. 64 short bed, stepside. Yours is the first bracket ive seen available. Still meking them? How do I go about ordering one. lee64

Budman56 · 06-21-2012, 09:33 PM

Capt I need another one of your brackets for a 66 c10. Would you send me your paypal info again here's my email budman5600@hotmail.com
Posted via Mobile Device

**Captainfab** · 06-22-2012, 01:05 AM

I'll send you an email in the AM Bud......

Quote:

Originally Posted by Budman56

Capt I need another one of your brackets for a 66 c10. Would you send me your paypal info again here's my email budman5600@hotmail.com
Posted via Mobile Device

bonehead · 06-22-2012, 12:05 PM

Sorry, I finding this thread late, but your bracket looks so simple and slick. Why did GM make that crazy offset bracket with the linkage thingy on the factory booster setup? Were they trying to get room for V8 engine clearance or something? This looks like it will work great with my 6 cyl.

Please educate me on this point.

Budman56 · 06-22-2012, 09:31 PM

Quote:

Originally Posted by Captainfab

I'll send you an email in the AM Bud......

Did you send that email yet?

Posted via Mobile Device

sitos · 07-02-2012, 02:42 PM

Good afternoon sir, I need your power booster and power steering brackets. They look great and would help my project. Thanks, Mike

**Captainfab** · 07-02-2012, 03:19 PM

PM coming your way.....

Quote:

Originally Posted by sitos

Good afternoon sir, I need your power booster and power steering brackets. They look great and would help my project. Thanks, Mike

jdoisher · 08-28-2012, 10:52 PM

Sent you a PM!!
Thanks
Jason

**Captainfab** · 08-28-2012, 10:59 PM

PM relied to......

Quote:

Originally Posted by jdoisher

Sent you a PM!!
Thanks
Jason

jdoisher · 08-31-2012, 01:13 PM

Quote:

Originally Posted by Captainfab

PM relied to......

Just got my parts!!! Thanks for getting them out to me! Gives me plenty to do over the long weekend!!!
Jason

**Captainfab** · 09-01-2012, 12:24 AM

I'm glad you got them in time.

I'm looking forward to the installed pics in your build thread.

Quote:

Originally Posted by jdoisher

Just got my parts!!! Thanks for getting them out to me! Gives me plenty to do over the long weekend!!!
Jason

bryankichler · 10-14-2012, 11:35 AM

Once again fantastic product I finally after almost a year got the time to do my brakes on the 66. This adapter took all the guesswork out was a direct bolt on. I didnt have time to grab pics but I will get some up next weekend.

**Captainfab** · 10-14-2012, 11:44 PM

Thanks for the compliment

Looking forward to the pics.

Quote:

Originally Posted by bryankichler

Once again fantastic product I finally after almost a year got the time to do my brakes on the 66. This adapter took all the guesswork out was a direct bolt on. I didnt have time to grab pics but I will get some up next weekend.

bryankichler · 10-22-2012, 06:38 PM

Pictures are up not 100% complete but getting really close

http://67-72chevytrucks.com/vboard/s...archid=3318088

**Captainfab** · 10-22-2012, 11:40 PM

Linky no worky. Try this.....

http://www.67-72chevytrucks.com/vboa...49#post5661949

Looks good Bryan

Thanks for posting the pics.

Caudillo64 · 10-24-2012, 07:17 AM

I just insalled mine easy bolt up no problems also looks good. Thanks.

**Captainfab** · 10-24-2012, 11:27 PM

Looking good Caudillo64

grs · 05-18-2014, 12:56 PM

Quote:

Originally Posted by Caudillo64

I just insalled mine easy bolt up no problems also looks good. Thanks.

Where did you buy the booster, master, and proportion valve?

**Captainfab** · 05-19-2014, 12:11 AM

You might try sending him a PM, but to me it looks like one of the typical aftermarket booster master and prop. valve combo's available from ECE, POL, CPP, etc.

Quote:

Originally Posted by grs

Where did you buy the booster, master, and proportion valve?

12-31-2011, 03:13 AM	#1
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Power Brake Booster Adapter Bracket Captainfab, I'm planning to run a hydraulic clutch on my 66 K10, and I already have an 8" double diaphragm booster from CPP. Can you make one of these 63-66 brake booster adapter brackets with the back plate that will allow me to mount a clutch master cylinder similar to the way it is done on your 60-62? it looks like the 60-62 version would work with two additional holes drilled in the original master mount location. Let me know, thanks. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

01-03-2012, 04:44 PM	#3
argonaut Senior Member Join Date: Aug 2008 Location: Long Beach, CA Posts: 1,813	Re: Power Brake Booster Adapter Bracket Captain, Thanks for the confirmation that you can do the bracket. I might not be ready for it until next month. I'm planning the build right now and want to make sure i have everything covered. I will send you a PM when I am ready for it. __________________ Jason M. @argonaut62 1972 K5 Blazer CST, Turquoise 1966 K20 Short Fleet Pickup, Big Ugly 1964 C10 Short Fleet, Gertrude 2001 Porsche 911 Carrera 1996 Ford Bronco XLT 1980 Jeep Wagoneer 2008 Honda CBR1000RR 2005 Honda RC51 1981 Honda CB750C No dis-assemble Johnny Five! No dis-assemble!

03-13-2012, 10:44 PM	#5
NewRevNorton Registered User Join Date: Mar 2012 Location: Falkville AL Posts: 17	Re: Power Brake Booster Adapter Bracket Bracket ordered!

03-16-2012, 07:57 AM	#6
lee64 Registered User Join Date: Jan 2012 Location: Topeka KS Posts: 82	Re: Power Brake Booster Adapter Bracket Hi, Pretty new to the site but not the trucks. Got my 4th one recently. 64 short bed, stepside. Yours is the first bracket ive seen available. Still meking them? How do I go about ordering one. lee64

06-21-2012, 09:33 PM	#8
Budman56 Registered User Join Date: Aug 2011 Location: Patterson California Posts: 1,133	Re: Power Brake Booster Adapter Bracket Capt I need another one of your brackets for a 66 c10. Would you send me your paypal info again here's my email budman5600@hotmail.com Posted via Mobile Device __________________ MY 65 C20 BUILD http://67-72chevytrucks.com/vboard/s...d.php?t=483346 ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/

06-22-2012, 12:05 PM	#10
bonehead Registered User Join Date: Jun 2007 Location: Charlotte, NC Posts: 516	Re: Power Brake Booster Adapter Bracket Sorry, I finding this thread late, but your bracket looks so simple and slick. Why did GM make that crazy offset bracket with the linkage thingy on the factory booster setup? Were they trying to get room for V8 engine clearance or something? This looks like it will work great with my 6 cyl. Please educate me on this point. __________________ past trucks: 1980 C-10 Silverado SWB 1961 C-10 custom cab LWB 1966 C-10 custom cab LWB

07-02-2012, 02:42 PM	#12
sitos Registered User Join Date: May 2011 Location: hacienda heights,ca Posts: 16	Re: Power Brake Booster Adapter Bracket Good afternoon sir, I need your power booster and power steering brackets. They look great and would help my project. Thanks, Mike

08-28-2012, 10:52 PM	#14
jdoisher Registered User Join Date: Jun 2012 Location: Denton Texas Posts: 407	Re: Power Brake Booster Adapter Bracket Sent you a PM!! Thanks Jason

10-14-2012, 11:35 AM	#18
bryankichler Registered User Join Date: Dec 2010 Location: Pittsburg, KS Posts: 54	Re: Power Brake Booster Adapter Bracket Once again fantastic product I finally after almost a year got the time to do my brakes on the 66. This adapter took all the guesswork out was a direct bolt on. I didnt have time to grab pics but I will get some up next weekend.

10-22-2012, 06:38 PM	#20
bryankichler Registered User Join Date: Dec 2010 Location: Pittsburg, KS Posts: 54	Re: Power Brake Booster Adapter Bracket Pictures are up not 100% complete but getting really close http://67-72chevytrucks.com/vboard/s...archid=3318088

10-22-2012, 11:40 PM	#21
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket Linky no worky. Try this..... http://www.67-72chevytrucks.com/vboa...49#post5661949 Looks good Bryan Thanks for posting the pics. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-24-2012, 07:17 AM	#22
Caudillo64 Registered User Join Date: Jul 2011 Location: Fresno, Ca Posts: 365	Re: Power Brake Booster Adapter Bracket I just insalled mine easy bolt up no problems also looks good. Thanks. Attached Images Last edited by Caudillo64; 10-24-2012 at 07:19 AM. Reason: spelling

10-24-2012, 11:27 PM	#23
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: Power Brake Booster Adapter Bracket Looking good Caudillo64 __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.