Rottenwood Garages C50 Hauler project about to begin! - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72freak · 07-13-2018, 09:22 PM

Getting closer to Street Rod Nationals...Louisville here we come!! 4 new rear tires arrived today and the Vintage air kit is installed and working out well!!!
Checking out front suspension components tomorrow and then taking in in for an alignment.

rkn463 · 07-14-2018, 11:54 AM

Quote:

Originally Posted by 72freak

Getting closer to Street Rod Nationals...Louisville here we come!! 4 new rear tires arrived today and the Vintage air kit is installed and working out well!!!
Checking out front suspension components tomorrow and then taking in in for an alignment.

Looking good! Which vintage air kit is that?

-Richard

72freak · 07-14-2018, 08:13 PM

Quote:

Originally Posted by rkn463

Looking good! Which vintage air kit is that?

-Richard

Compact 2. Its about the only thing I found that will actually fit. Even the under dash kits were too big due to the lack of room under the dash of these medium duties.

RDrancher · 07-14-2018, 10:41 PM

Very cool build! You've got me eyeballin' all the old grain trucks around here.

rkn463 · 07-15-2018, 09:10 AM

Quote:

Originally Posted by 72freak

Compact 2. Its about the only thing I found that will actually fit. Even the under dash kits were too big due to the lack of room under the dash of these medium duties.

Thanks for the info, air conditioning is one of the things I want to add to my c50 once it is on the road. Room in the cab has been a concern I've had all along.

-Richard

72freak · 07-16-2018, 11:39 PM

Quote:

Originally Posted by rkn463

Thanks for the info, air conditioning is one of the things I want to add to my c50 once it is on the road. Room in the cab has been a concern I've had all along.

-Richard

You will loose all of your glove box.. Do NOT order the compact kit from Southern Air. It wont work.

**Clyde65** · 07-17-2018, 06:46 PM

Old Air Products has what you need, look them up!

rkn463 · 07-17-2018, 10:57 PM

Quote:

Originally Posted by 72freak

You will loose all of your glove box.. Do NOT order the compact kit from Southern Air. It wont work.

Quote:

Originally Posted by Clyde65

Old Air Products has what you need, look them up!

Great info guys, thanks!

72freak · 07-19-2018, 07:39 AM

Quote:

Originally Posted by rkn463

Great info guys, thanks!

I have used Old Air too. Each company has their pros and cons. Actually had trouble with both the Vintage and Old systems and had to return one and have replacement parts for the other. Old Air customer service was lacking.

Remember to buy a small unit as there is no room under a medium duty. You will also have to delete your passenger air vent if you are going with this style.

72freak · 07-22-2018, 08:18 AM

We are finishing up the small things for our trip to Louisville to the Street Rod Nationals. I got the rear wheel simulators on, the one needed lower ball joint is going in today and an alignment will come this week. New tires all the way around, air horns hooked up, trans temp and back up fuel gauge wired and the bed extension and headache rack converted to bumper stop has been roughed in.

Airdirect · 07-23-2018, 04:46 PM

Quote:

Originally Posted by rkn463

Thanks for the info, air conditioning is one of the things I want to add to my c50 once it is on the road. Room in the cab has been a concern I've had all along.

-Richard

Here is the route I choose for my 1979 C 70. Most everything off a pickup will work except for the under dash unit. It is a little different due to the hump. You would just need to look at a donor pickup and determine if it will fit.

http://67-72chevytrucks.com/vboard/s...d.php?t=721374

rkn463 · 07-23-2018, 10:12 PM

Quote:

Originally Posted by Airdirect

Here is the route I choose for my 1979 C 70. Most everything off a pickup will work except for the under dash unit. It is a little different due to the hump. You would just need to look at a donor pickup and determine if it will fit.

http://67-72chevytrucks.com/vboard/s...d.php?t=721374

Yes, I've been following your build too. It is looking great.

Some of the 67-72 medium duty had factory a/c but it is super rare.

Keep up the good work guys!

-Richard

72freak · 08-06-2018, 08:10 PM

About 900 miles round trip. Mountain roads and flat. It did great. 12 MPG. and all went well. AC was a little temperamental and the new wiper motor gave me some trouble in the 4 hours of pouring rain but aside from that.....what a pleasure to drive. Made 2 tows during the journey and they were a breeze. Rolled into Louisville doing 75 and the wind at our back.

RDrancher · 08-06-2018, 08:42 PM

Sounds like a good trip and 12 mpg is pretty decent for a rig that size. How is it for power?

72freak · 08-06-2018, 09:28 PM

Quote:

Originally Posted by RDrancher

Sounds like a good trip and 12 mpg is pretty decent for a rig that size. How is it for power?

All I need and more. 513 rear makes sure that happens.

**3757chevy** · 08-16-2018, 06:04 PM

School starts soon... look out .

Travisarmenta · 08-17-2018, 11:54 AM

This school bus thing will NEVER get old.

72freak · 08-19-2018, 06:30 PM

Quote:

Originally Posted by Travisarmenta

This school bus thing will NEVER get old.

Every time I hit those inferior brakes I look up for a school bus! Thank goodness others have better ones than I do!!

These pictures loading sideways is getting a little OLD!!!

flashed · 08-19-2018, 09:06 PM

Love the truck and the other Toys .

RDrancher · 08-19-2018, 09:54 PM

That first pic may be sideways, but it sure is cool!

**3757chevy** · 08-20-2018, 12:56 AM

This might help.

Nice Toys.

72freak · 09-26-2018, 08:59 PM

69 with a 69

72freak · 09-26-2018, 09:00 PM

One way to wire emergency lights on the rear!!! Here we go with the sideways pics again!?!?!

**3757chevy** · 09-26-2018, 11:36 PM

Here we go.

Bobbyh68 · 09-28-2018, 02:16 PM

Man AWESOME C50! I'm currently building a wedge bed truck and my Hodge Wedge bed has the 4 ratchet chain hold down things that are welded to the bed diamond deck. Can you post some pics of your FLUSH mounted ones ( mine are a tripping hazard) . I sure would like to cut holes in my deck floor and flush mount mine.

07-13-2018, 09:22 PM	#101
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Rottenwood Garages C50 Hauler project about to begin! Getting closer to Street Rod Nationals...Louisville here we come!! 4 new rear tires arrived today and the Vintage air kit is installed and working out well!!! Checking out front suspension components tomorrow and then taking in in for an alignment. Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

07-14-2018, 10:41 PM	#104
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: Rottenwood Garages C50 Hauler project about to begin! Very cool build! You've got me eyeballin' all the old grain trucks around here. __________________ Romans 10:9 - The Truth

07-17-2018, 06:46 PM	#107
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,545	Re: Rottenwood Garages C50 Hauler project about to begin! Old Air Products has what you need, look them up! __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

07-22-2018, 08:18 AM	#110
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Rottenwood Garages C50 Hauler project about to begin! We are finishing up the small things for our trip to Louisville to the Street Rod Nationals. I got the rear wheel simulators on, the one needed lower ball joint is going in today and an alignment will come this week. New tires all the way around, air horns hooked up, trans temp and back up fuel gauge wired and the bed extension and headache rack converted to bumper stop has been roughed in. Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

08-06-2018, 08:10 PM	#113
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Rottenwood Garages C50 Hauler project about to begin! About 900 miles round trip. Mountain roads and flat. It did great. 12 MPG. and all went well. AC was a little temperamental and the new wiper motor gave me some trouble in the 4 hours of pouring rain but aside from that.....what a pleasure to drive. Made 2 tows during the journey and they were a breeze. Rolled into Louisville doing 75 and the wind at our back. Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

08-06-2018, 08:42 PM	#114
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: Rottenwood Garages C50 Hauler project about to begin! Sounds like a good trip and 12 mpg is pretty decent for a rig that size. How is it for power? __________________ Romans 10:9 - The Truth

08-16-2018, 06:04 PM	#116
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,024	Re: Rottenwood Garages C50 Hauler project about to begin! School starts soon... look out . Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

08-17-2018, 11:54 AM	#117
Travisarmenta Registered User Join Date: Oct 2015 Location: Woodbridge Va Posts: 401	Re: Rottenwood Garages C50 Hauler project about to begin! This school bus thing will NEVER get old.

08-19-2018, 09:06 PM	#119
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Rottenwood Garages C50 Hauler project about to begin! Love the truck and the other Toys .

08-19-2018, 09:54 PM	#120
RDrancher Registered User Join Date: Aug 2014 Location: Decatur, Texas Posts: 673	Re: Rottenwood Garages C50 Hauler project about to begin! That first pic may be sideways, but it sure is cool! __________________ Romans 10:9 - The Truth

08-20-2018, 12:56 AM	#121
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,024	Re: Rottenwood Garages C50 Hauler project about to begin! This might help.Nice Toys. Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

09-26-2018, 08:59 PM	#122
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Rottenwood Garages C50 Hauler project about to begin! 69 with a 69 Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

09-26-2018, 09:00 PM	#123
72freak Rottenwood Garage Member Join Date: May 2005 Location: Marietta, Georgia Posts: 4,321	Re: Rottenwood Garages C50 Hauler project about to begin! One way to wire emergency lights on the rear!!! Here we go with the sideways pics again!?!?! Attached Images __________________ 2004 Chevrolet Suburban C1500 2001 Chevrolet 2500HD Crew 6.0 1999 Harley Davidson Electra Glide 1972 Chevrolet C-20 Custom Camper "Dump Truck" 1972 Chevrolet C-20 Suburban "Big Green" 1969 Chevrolet C-50 Wedge Hauler "Leonidis" 1966 C-10 2x4 short fleet 327 4 speed "Race Truck" 1952 Plymouth Cranbrook "Rican" (my grandfathers) 1931 Ford Model A Coupe "Black Beauty" 1930 Ford Model A truck "Club Cab" 4x4 Rottenwood Garage and Speed Shop.....where everything must be racy! *It's not just a hobby..It's a LIFESTYLE!!!* Thanks for nothing Barrett-Jackson You cant fix stupid or teach accountability! Time wasters, looky Lous and tire kickers are everywhere!

09-26-2018, 11:36 PM	#124
3757chevy Senior Member Join Date: Mar 2016 Location: Near Canon City ,Colorado Posts: 4,024	Re: Rottenwood Garages C50 Hauler project about to begin! Here we go. Attached Images __________________ '35 1/2 ton Pickup (bought 2020) '68 C10 Suburban (bought 2021) '72 K5 Blazer (bought 2013) '67 Stepside (bought 1997-sold 2021) '96 Bronco Eddie Bauer (inherited 2010) My 1st day here-'67 C10(sold)and '72 K5 Blazer http://67-72chevytrucks.com/vboard/s...d.php?t=702056 "Another Blue Chevy"(1935) http://67-72chevytrucks.com/vboard/s...d.php?t=799203 '68 Burb...https://67-72chevytrucks.com/vboard/...d.php?t=822994 MIKE

09-28-2018, 02:16 PM	#125
Bobbyh68 Registered User Join Date: Jul 2008 Location: Summerville SC Posts: 42	Re: Rottenwood Garages C50 Hauler project about to begin! Man AWESOME C50! I'm currently building a wedge bed truck and my Hodge Wedge bed has the 4 ratchet chain hold down things that are welded to the bed diamond deck. Can you post some pics of your FLUSH mounted ones ( mine are a tripping hazard) . I sure would like to cut holes in my deck floor and flush mount mine.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.