![]() |
|
![]() |
#1 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Rear axle powder coated.. I really like the look of powder coat. They did 2 coats of the 60% gloss black.. I've heard you shouldn't really powder coat axles because they can chip easily, but I figured i'd give it a try, plus I'm not going to be seriously off-roading this thing either and I can live with a scratch or two.
The backing plates and drums where also powder coated. The local guy I use around here reinstalled the gears, axles, and backing plates for me. He also made sure the housing was clean inside because sometimes these powder coating shops get sand and dirt inside of them. He spent some extra time cleaning them out for me. If you're in the San Jose area, Superior 4 wheel drives is where I take all my stuff to if I cant do it myself. The guy specializes in drivelines, suspension, and most importantly he knows a ton of stuff about K5. He has a couple of his own.
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#2 |
Registered User
Join Date: May 2013
Location: Albuquerque, NM
Posts: 1,106
|
Re: Attempting my first build 72 K5
Quality work on this Mike. Can't wait to see this on the road.
Anytime you get a chance on the pics, no rush. Thanks |
![]() |
![]() |
![]() |
#3 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Derrick - Last night, I sent all the pics of the winch that I had when I was removing it. It didn't occur to me to take more because I had no intention of using it again, but I think you'll be able to figure out how it was mounted.
Also, I have a 36 Gallon gas tank that I wont be using. Any interest in that?
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#4 |
Registered User
![]() Join Date: May 2013
Location: wall,nj
Posts: 865
|
Re: Attempting my first build 72 K5
You are doing awesome detail work here.
That front end looks good !
__________________
Tom 71 K2500 71 K5 Jimmy |
![]() |
![]() |
![]() |
#5 |
Registered User
Join Date: May 2013
Location: Albuquerque, NM
Posts: 1,106
|
Re: Attempting my first build 72 K5
Mike, thank you for all the pics, they should be a great help.
Can't wait to get it. I plan on using a couple factory skid plates for my blazers so I'm sticking with original tanks. Could use one original one not banged up. Thanks man. |
![]() |
![]() |
![]() |
#6 |
Registered User
Join Date: Feb 2013
Location: Phoenix AZ
Posts: 88
|
Re: Attempting my first build 72 K5
You're doing some great quality work brother. Keep it up.
|
![]() |
![]() |
![]() |
#7 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Thanks guys! I really appreciate the nice comments. It def helps keep me motivated
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#8 |
Registered User
Join Date: May 2013
Location: Albuquerque, NM
Posts: 1,106
|
Re: Attempting my first build 72 K5
Mike, here's pics of my set-up if it helps, I believe is oem??? Anyone?
![]() ![]() |
![]() |
![]() |
![]() |
#9 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
Can't recall exactly - I'd guess threads-up to avoid damage. I'll check the GMC here...
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#10 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
Threads down at both the tie rod bracket and axle end...
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Thanks, Pete. That was my original guess. Funny thing, LMC shows a picture of the castle nuts facing upwards, but I just had this feeling that's not correct.
I'm setting realistic measurable goals this weekend. Install the tie rod, steering stabilizer, Center link arm, and pitman.. If I get through that, I will start routing the fuel lines since there's nothing to obstruct me from getting to some of the tight spots. in the very back.
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#12 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Steering Stabilizer question for you guys.. I ordered Skyjackers Stabilizer part# 9055, which says HD OEM Replacement Kit for 1972 k5 Blazer 4x4. (minus the brackets). It came with the bushings, nuts, and tapered studs..
The studs are different than the ones that where on there before. I don't know if that stabilizer was ever changed or was replaced with different hardware/brackets than original OEM. Skyjackers instructions: 1. Install the supplied tapered stud into the OEM tie rod. 2. Install the supplied bushing & sleeve into the body and eye of the new skyjacker steering stabilizer & attach to the OEM axle bracket using the OEM hardware. 3. Install the supplied boot over the shaft end of the stabilizer & install the supplied bushing into the shaft end eye of the new stabilizer. 4. Mount the shaft end of the stabilizer to the new stud on the OEM tie rod. When I removed my steering stabilizer the tapered stud was not inserted through the tie rod. It had a bracket that had to U-bolts holding it to the tie rod. The other tapered stud was bolted to the axle housing.
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#13 |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
The factory assembly manual also shows them pointing down.. Now i ran into a little bit of trouble. I can get one side in, but the leaf spring is blocking the clearance in need to get the tie rod stud through the other knuckle
Do I need to loosen up one of the leaf springs to get the clearance I need or is their an easy way?
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
![]() |
![]() |
![]() |
#14 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
Here's the stabilizer I've used on my 4wd's with the OEM tie rod brackets: http://www.rockauto.com/catalog/more...937&cc=1051445
Your tie rod bracket looks correct to me. The axle end does too - It's a welded integral part of the axle. No way to reuse the old tie rod bracket with the Skyjacker stabilizer? Maybe use the old bolts/castle nuts?
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#15 | |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Quote:
I think i'm going to try and use the old tapered studs and see if that works. I hate how all these after market parts companies say their parts are direct oem fit.
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
|
![]() |
![]() |
![]() |
#16 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
Can't agree more. I've tried to make due whenever poss with OEM parts but not always an option. As for parts in general, I recently had to replace a windshield washer pump. That was hard to find in a non "universal" setup. When I found a pump (US made), I bought a spare to keep on the shelf. Wearable items like gaskets I buy extras.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#17 | |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Quote:
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
|
![]() |
![]() |
![]() |
#18 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
I can not quite get my index finger between the Monroe stabilizer linked above and the lower leaf spring on my K20 (the Blazer and GMC are not here presently). Maybe the diameter of the aftermarket stabilizer is too large?
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#19 | |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Quote:
I used the original studs from my old stabilizer and put those in the Skyjacker stabilizer and that did the trick.. Lined up just like OEM.. The stabilizer if a little bigger ( thickness) so i was worried I wouldn't have enough clearance between the leaf spring. So, what did learn??? Install the steering tied rod and steering stabilizer before you bolt the axle to the leaf springs.. LOL
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
|
![]() |
![]() |
![]() |
#20 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
Aside from the stabilizer and it's bolts Derrick's pic looks OEM to me
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
#21 |
Registered User
Join Date: May 2013
Location: Albuquerque, NM
Posts: 1,106
|
Re: Attempting my first build 72 K5
It appears the hardware for the stabilizer that mounts to fixed axle bracket is same as what's shown on mikes picture. The stabilizer hardware on tie rod end looks different. Mike if you don't end up using the stabilizer hardware let me know. Also I will have some questions on the winch this later, just picked it up today.
|
![]() |
![]() |
![]() |
#22 | |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Quote:
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
|
![]() |
![]() |
![]() |
#23 |
Senior Member
![]() Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,508
|
Re: Attempting my first build 72 K5
Nice build so far, enjoying the read.....but, could the stabilizer be mounted to the bottom of the bracket, might give you more room. Mines apart so i have no referance.
Keep up the detailed work
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim |
![]() |
![]() |
![]() |
#24 | |
Registered User
Join Date: Aug 2013
Location: Central Coast, CA
Posts: 774
|
Re: Attempting my first build 72 K5
Quote:
Not quite sure. I actually thought about that.. If anybody has any reference or has done this before I'd like to see some pics. However, I think overall it should be ok.
__________________
My Build Thread 72 K5 http://67-72chevytrucks.com/vboard/s...d.php?t=628612 Build version 2.0: 72 K5 6.0 LQ9, 4L80e, NP205 http://67-72chevytrucks.com/vboard/s...d.php?t=793192 ____________________________________________ 1972 CST K5 Blazer Dark Olive |
|
![]() |
![]() |
![]() |
#25 |
Carpe manana
![]() ![]() Join Date: Dec 2010
Location: Eau Claire, WI
Posts: 12,386
|
Re: Attempting my first build 72 K5
Looks good! Can't recall off hand where I got the pump - will try to dig out my spare and get more info. It might have been from RockAuto as well.
__________________
1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 ![]() |
![]() |
![]() |
![]() |
Bookmarks |
|
|