79 C10 swap with L92 with 6L90

[v502]

Alright guys i am stuck and i need help.

Need some pics of exhaust setups i can't really figure out how to put a balance-pipe or x-pipe in my system.

I trying to do a two 3 in pipes that comes from the headers then a x-pipe or balance pipe which ever fits then two cutouts with dumps just before 2 magnaflow mufflers and exits just before the rear tires and after step side with splash tip's.

I have to figure it out within two days if someone can post some pic's it make my life easier cause the guy who's doing my exhaust is a friend and he weld's 18-wheeler tanks for living and really busy that way my money be well spent and defiantly help him.

[silvereagle07]

Here's a link to some nice cutouts.
http://www.quicktimeperformance.com/QTEC/index.php

http://www.badlanzhpe.com/

Here's a link to xpipes. Check out the one with the dump outlet already there.
http://www.pypesexhaust.com/xpipes.html

[68 TT]

Originally Posted by silvereagle07

Here's a link to some nice cutouts.
http://www.quicktimeperformance.com/QTEC/index.php

http://www.badlanzhpe.com/

Here's a link to xpipes. Check out the one with the dump outlet already there.
http://www.pypesexhaust.com/xpipes.html

I'm doing a version of this one from the Pypes link on mine.

http://www.pypesexhaust.com/images/rpe631x.gif

I'm going to extend the cut out tubes far enough that I can manually remove the caps at the track and keep the exhaust gasses out from under my car. I may turn them 45 degrees so they exit perpendicular with the rocker panels just in front of the rear tires.

[v502]

I had the pypes x pipe is mind but worried about the how close its going to be trans pan. I already got the QTP 3 in cutouts.

[68 TT]

Have you decided on your mufflers yet?

Do you want to run tail pipes straight out the back, turned out behind or in front of the rear wheels, or just turned down at the rear axle?

[v502]

Originally Posted by 68 TT

Have you decided on your mufflers yet?

Do you want to run tail pipes straight out the back, turned out behind or in front of the rear wheels, or just turned down at the rear axle?

I going for magnaflow mufflers cause they more on the quieter side and the tail pipes will come out before rear wheels

[v502]

Hi guys i haven't been on the forum for a while and my truck progress stopped because of the holidays and cause i am not in states i am in
Dubai and wont come back for 3 months but my truck is at my friends getting my exhaust done here some pics he sent

Down pipe


V bands


Custom X-pipe he made

[78-5.3]

nice pipes there similar to mine! dont mean to hi jack your pics but here is one!!

[glock35ipsc]

Dang, how did I miss one? I can't wait to see how it runs!

[79gmc5.3]

This is going to be one wicked ride. What are you going to do for the suspension and brakes. I am starting to plan that out for my 6.0l swap. So I am looking for suggestions.

[v502]

Originally Posted by 78-5.3

nice pipes there similar to mine! dont mean to hi jack your pics but here is one!!

They are nice i was going to bend mine but i didn't cause it probably look bad because of how i wanted the exhaust so i settled for mandrel bends and we had to make the x pipe.

Originally Posted by glock35ipsc

Dang, how did I miss one? I can't wait to see how it runs!

Thanks man I am glad you like it It be slow for a while until i am back in the states.

Originally Posted by 79gmc5.3

This is going to be one wicked ride. What are you going to do for the suspension and brakes. I am starting to plan that out for my 6.0l swap. So I am looking for suggestions.

Thanks I haven't done anything for the brakes or suspension i keeping them for later after i get the car on the road and use it for a while.

[v502]

UPDATE!!!

Hey Guys I am still out the states seems like i got 1 more month left but i got some progress pics on the exhaust from my friend
excuse the crappy iphone pics.

What do guys think? I couldn't find anything besides the long tip.
Which one should i go with? Any other suggestions before i give him the okay to weld it.


This how long the tip right now.


I kind off photo-chopped the tip (shorter) #1


photo-chopped the tip (shortest) #2


Thats the where the muffler is.












Cutouts installed can be replaced with cats if i need them.


Cutouts

[atopper]

suuuuuuubscribing !!!!!!!!!!!!!! very nice build mr deep pockets lol

[78swest]

nice nice your right up the i5 from me im salem area.....love the blue color.....why you over seas you military to?

[STOCKISH]

Exhaust looks good. Just keep the tips as short as possible in my opinion.

[menace121978]

looks good man. i agree with Josh... shorter the better.

[STOCKISH]

Originally Posted by menace121978

looks good man. i agree with Josh... shorter the better.

Well, at least as far as exhaust goes. Maybe not everything.

[Damien]

I'd go with the shorter tip and make the cut vertical to the body. It looks like the back of the tip sticks out little more than the front.

[68 TT]

Originally Posted by Damien

I'd go with the shorter tip and make the cut vertical to the body. It looks like the back of the tip sticks out little more than the front.

Exactly what i was going to say. Make the cut align with the body panel and tuck it in under the body a little like in the last option you showed.

[Pyrotechnic]

+3 on changing the tip angle.

Those V-Band flanges are awesome ! Gotta love having a modular exhaust you can change around.

[mcbassin]

Exhaust is too cool!

[silvereagle07]

The x pipe looks awesome but so does the rest of the exhaust. I agree to keep it as close as possible but Damien has a good point to adjust the tip vertical maybe it will look better.jmo What muffler are you using?

[menace121978]

good one!

[1977 GMC]

Hey buddy I had a question, I have a 1977 Gmc Stepside, when you upgraded to Led on the Right side (driver side) tail light stay bright when your lights are on? Is that because orginally that is where the lisense plate went? You can email me at or reply me at Big_bad_dogs11@yahoo.com
Thanks,
Jose

[v502]

Thanks guys i tell my friend to shorten the tip and get it flush with body or maybe not weld the last part until i get back and get the car running and go back and do it the way i like cuz i don't trust the camera on that each angle make the exhaust look different.