Interest in aluminum hub knobs? - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**CUSTOM/10** · 02-07-2016, 10:38 AM

I have a yellow one I could send you, there the same other than the color & the blue 1/2 tons don't have spicer on them. I can send the chrome piece also so you have it for test fitting ! And I wouldn't need to get them back.

LMK
Gary

$20071k10 · 02-08-2016, 10:29 AM

super winch makes blue D44 knobs http://libertytruckandauto.com/images/parts/400518.JPG

$20071k10 · 02-08-2016, 10:30 AM

superwinch makes blue D44 knobs http://libertytruckandauto.com/images/parts/400518.JPG

don't know why this double posted!

nvrenuf · 02-08-2016, 12:19 PM

Superwinch makes hubs with blue knobs, they don't make replacement blue knobs for Spicer hubs (which is what the custom knobs in this thread are for).

**CUSTOM/10** · 02-09-2016, 07:07 PM

The 1/2 ton spicer hub dial is headed your way !

Gary

$20071k10 · 02-09-2016, 08:13 PM

Quote:

Originally Posted by nvrenuf

Superwinch makes hubs with blue knobs, they don't make replacement blue knobs for Spicer hubs (which is what the custom knobs in this thread are for).

Yes tds makes a replacement aluminum knob, they don't make replacement blue knobs for Spicer hubs ( which is what this custom knobs thread is for)

nvrenuf · 02-09-2016, 08:30 PM

Quote:

Originally Posted by $20071k10

Yes tds makes a replacement aluminum knob, they don't make replacement blue knobs for Spicer hubs ( which is what this custom knobs thread is for)

I know about the TDS knobs and the purpose of this thread. My post was about Superwinch not making replacement knobs (re: your post).

What I'd really like to see made is the chrome bezel for Spicer hubs (specifically, for D60's).

Russ33 · 02-11-2016, 11:15 PM

I just heard of these from Undertaker. Please let me know if you still have a set available for 1972 dana 44 3/4 ton. Thank you,Russ

**gmc 2500 4x4** · 02-12-2016, 06:29 AM

i need to say thank you for a great set of dials! nice work, paul

**GMCGrim** · 02-12-2016, 08:37 AM

Thanks Paul

**GMCGrim** · 02-12-2016, 08:39 AM

Quote:

Originally Posted by Russ33

I just heard of these from Undertaker. Please let me know if you still have a set available for 1972 dana 44 3/4 ton. Thank you,Russ

I should have more by the end of next week. I will notify you when they arrive.

**72 paul** · 02-12-2016, 10:10 AM

Will step in line for a 1/2 ton set Paul.

**GMCGrim** · 02-12-2016, 04:59 PM

Quote:

Originally Posted by 72 paul

Will step in line for a 1/2 ton set Paul.

The half ton ones are several weeks out, I just received the prototype in the mail. But I will let everyone know when they are ready.

El Dorado Jim · 02-20-2016, 02:02 AM

Quote:

Originally Posted by argonaut

I just bought new stainless steel socket head 3/8"-16 bolts for mine. I'm sure they were a lot less than $10/bolt. I do have two sets of original bolts too. Are these from quad4x4 actually OEM bolts or just replacements??

you can research this for yourself, but I was at a fastener place today , and the guy said that stainless steel bolts are not very strong, I am going to use my original bolts.

El Dorado Jim · 02-20-2016, 02:05 AM

Quote:

Originally Posted by GMCGrim

You are right, they do have a square profile and the ones from 4x4 tech are the originals but he has a limited amount of them for a premium price. I went to a place that rebuilds hydraulic cylinders and bought some from them that are the same dimension and close to the same profile. They fit very well.

Hi Bruce, can you find out which O rings or whatever you used,(dimensions) I am having trouble finding anything that will work, thanks, Jim

enigma · 02-20-2016, 10:56 AM

im in line for a set for the half ton ones when they come in!!!!!
Please

**GMCGrim** · 02-20-2016, 11:18 AM

Quote:

Originally Posted by El Dorado Jim

Hi Bruce, can you find out which O rings or whatever you used,(dimensions) I am having trouble finding anything that will work, thanks, Jim

Jim, I have some that will work in addition to some originals. I need to find the part number for the new ones. I bought them at a place that repairs hydraulic cylinders. I will send you the info.

**undertaker72** · 02-20-2016, 01:05 PM

Quote:

Originally Posted by GMCGrim

Jim, I have some that will work in addition to some originals. I need to find the part number for the new ones. I bought them at a place that repairs hydraulic cylinders. I will send you the info.

if you could forward me that part number also thanks kevin

El Dorado Jim · 02-20-2016, 03:33 PM

Thanks Bruce, I went to a hydraulic shop and they couldn't find anything that would work

**GMCGrim** · 02-21-2016, 03:54 PM

The company where I got the seals is American Seal Co 3528 E Desmet Spokane Wa 99202. 509-534-0455. Part HRU18-250-18.
Again these have the same dimensions as the originals but not the same profile but it is close.

El Dorado Jim · 02-22-2016, 10:07 PM

Quote:

Originally Posted by GMCGrim

The company where I got the seals is American Seal Co 3528 E Desmet Spokane Wa 99202. 509-534-0455. Part HRU18-250-18.
Again these have the same dimensions as the originals but not the same profile but it is close.

thanks Bruce

**aotte1** · 03-01-2016, 04:24 PM

Interested in a set of the 3/4 ton blue ones.

Les

**undertaker72** · 03-01-2016, 10:59 PM

jim , is you machinist in Montana

**Ol Blue K20** · 03-02-2016, 05:36 PM

My hub dials just arrived!! They're nice.....very nice. Thanks Bruce!

**GMCGrim** · 03-03-2016, 08:30 AM

Quote:

Originally Posted by Ol Blue K20

My hub dials just arrived!! They're nice.....very nice. Thanks Bruce!

Thanks Dale, I am glad that you like them.

02-07-2016, 10:38 AM	#101
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Interest in aluminum hub knobs? I have a yellow one I could send you, there the same other than the color & the blue 1/2 tons don't have spicer on them. I can send the chrome piece also so you have it for test fitting ! And I wouldn't need to get them back. LMK Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859

02-08-2016, 10:29 AM	#102
$20071k10 Registered User Join Date: Feb 2015 Location: Mancos,CO Posts: 101	Re: Interest in aluminum hub knobs? super winch makes blue D44 knobs http://libertytruckandauto.com/images/parts/400518.JPG __________________ Brian

02-08-2016, 10:30 AM	#103
$20071k10 Registered User Join Date: Feb 2015 Location: Mancos,CO Posts: 101	Re: Interest in aluminum hub knobs? superwinch makes blue D44 knobs http://libertytruckandauto.com/images/parts/400518.JPG don't know why this double posted! __________________ Brian

02-08-2016, 12:19 PM	#104
nvrenuf Registered User Join Date: May 2005 Location: Mobile, Al Posts: 92	Re: Interest in aluminum hub knobs? Superwinch makes hubs with blue knobs, they don't make replacement blue knobs for Spicer hubs (which is what the custom knobs in this thread are for). __________________ John '91 Blazer, full top, bbc, 4spd, Doubler, 1 tons, 40's

02-09-2016, 07:07 PM	#105
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,850	Re: Interest in aluminum hub knobs? The 1/2 ton spicer hub dial is headed your way ! Gary __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 02-10-2016 at 07:51 AM.

02-11-2016, 11:15 PM	#108
Russ33 Registered User Join Date: Mar 2014 Location: Angier,North Carolina Posts: 33	Re: Interest in aluminum hub knobs? I just heard of these from Undertaker. Please let me know if you still have a set available for 1972 dana 44 3/4 ton. Thank you,Russ

02-12-2016, 06:29 AM	#109
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,970	Re: Interest in aluminum hub knobs? i need to say thank you for a great set of dials! nice work, paul

02-12-2016, 08:37 AM	#110
GMCGrim Senior Member Join Date: Nov 2011 Location: Spokane Wa Posts: 207	Re: Interest in aluminum hub knobs? Thanks Paul

02-12-2016, 10:10 AM	#112
72 paul Senior Member Join Date: May 2011 Location: las vegas'nv Posts: 499	Re: Interest in aluminum hub knobs? Will step in line for a 1/2 ton set Paul.

02-20-2016, 10:56 AM	#116
enigma Registered User Join Date: Feb 2011 Location: enumclaw,Wa Posts: 120	Re: Interest in aluminum hub knobs? im in line for a set for the half ton ones when they come in!!!!! Please

02-20-2016, 03:33 PM	#119
El Dorado Jim Registered User Join Date: Dec 2009 Location: El Dorado Ca Posts: 3,374	Re: Interest in aluminum hub knobs? Thanks Bruce, I went to a hydraulic shop and they couldn't find anything that would work

02-21-2016, 03:54 PM	#120
GMCGrim Senior Member Join Date: Nov 2011 Location: Spokane Wa Posts: 207	Re: Interest in aluminum hub knobs? The company where I got the seals is American Seal Co 3528 E Desmet Spokane Wa 99202. 509-534-0455. Part HRU18-250-18. Again these have the same dimensions as the originals but not the same profile but it is close.

03-01-2016, 04:24 PM	#122
aotte1 Registered User Join Date: Oct 2013 Location: lousiville Ky Posts: 2,645	Re: Interest in aluminum hub knobs? Interested in a set of the 3/4 ton blue ones. Les

03-01-2016, 10:59 PM	#123
undertaker72 Senior Member Join Date: Dec 2013 Location: nephi , utah Posts: 2,308	Re: Interest in aluminum hub knobs? jim , is you machinist in Montana __________________ I aint nobody DORK 1972 Cheyenne super k10 swb 350 4speed posi hooks 1934 ford 3 window blown 355 1969 Camaro hugger orange hounds tooth

03-02-2016, 05:36 PM	#124
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,245	Re: Interest in aluminum hub knobs? My hub dials just arrived!! They're nice.....very nice. Thanks Bruce! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.