KS parting out 72 GMC LB BB

[michael bustamante]

Still got the brake booster set up? How about the front brake lines from the prop valve to the front caliper soft lines?

[Cash3481]

Originally Posted by DD1

$100 sounds good. Let me know what the shipping is when you have a chance, and PM me payment info. Do you use Paypal?

Yes your concept seems correctly stated. I do use paypal. I'll weigh the new box tomorrow after I get it. Then I'll pm you the Email address for paypal.

Originally Posted by teeitup

MIke, go ahead and see him the motor stands, I have another truck bought so I don't need 2 sets. Thanks Randy

thanks Randy.

Originally Posted by michael bustamante

Still got the brake booster set up? How about the front brake lines from the prop valve to the front caliper soft lines?

Yes booster is claimed but I haven't heard reply to the shipping yet. I don't think.lol I'll check the thread tonight. Hard lines down to frame then soft lines from there which one would you like? I have both. If it's hard lines... Let me know exactly whack ones you want.
Posted via Mobile Device

[michael bustamante]

I would need both driver and passenger side hardlines from the prop valve to the soft lines but not the soft lines themselves. Go ahead and shoot me a price to nm 87110 business address if you use fed ex or ups. Also if the booster setup is still avail if you could quote me a ship also on that id appreciate it

[duallyjams]

19" is to big thanks for checking.

[Ironhorse]

Cash, did I miss you at the swap meet today with the column? Still interested in it if you are coming to the meet tomorrow I will still be there til 4:00 pm or a bit after.

[Cash3481]

Originally Posted by michael bustamante

I would need both driver and passenger side hardlines from the prop valve to the soft lines but not the soft lines themselves. Go ahead and shoot me a price to nm 87110 business address if you use fed ex or ups. Also if the booster setup is still avail if you could quote me a ship also on that id appreciate it

I pulled the motor/tranny tonight so I'll pull them tomorrow.

Originally Posted by duallyjams

19" is to big thanks for checking.

Sorry i couldn't help. What does the 19 inch fan mean vs the 18? I'd appreciate the education if you don't mind.

Originally Posted by Ironhorse

Cash, did I miss you at the swap meet today with the column? Still interested in it if you are coming to the meet tomorrow I will still be there til 4:00 pm or a bit after.

My fault... Wrong booth couldn't find stall number from service and rain out. I'll be there early. Ill pm you my cell.
Posted via Mobile Device

[PICKMUP]

If you go back to your first post, you can edit and add SOLD to the items as they are sold. That would really help keep up with what is left.

[Cash3481]

Originally Posted by PICKMUP

If you go back to your first post, you can edit and add SOLD to the items as they are sold. That would really help keep up with what is left.

Thank's for the advice. Ive added sold or pending to the list.

[Cash3481]

Originally Posted by Critterman71

are the AC brackets or any of the AC stuff still available. Any seat belts? Thanks

inner seatbelt bolts are out. cant get the retractors out yet. Still working on it because they're decent. ill get you a picture.

[Cash3481]

Originally Posted by mcbassin

Mike,
I am mainly interested in the rear harness. But if it's not too high and you want to sell the whole wiring set as a package. How much total shipped? thanks

Because the PO added so many T-taps to the rear harness most of these will have to be cut and spliced to get through the rear hole to remove. If you want the dash, tail and intermediate harness Ill do 40 in a large FRB since the dash harness is in a medium FRB right now and is at its limit. LMK mike

[Cash3481]

Originally Posted by jdperez1995

Ill take the ashtay if it is still available. how much shipped to 28092

JD Perez1995: $15 for the ashtray shipped to 28092

[chewychevy67]

Chewychevy: exhaush hangers are going to be a week or so till I get them off and good pics. It has all 4. Ill ship to canada if your paying shipping.


not a problem

[DD1]

Hey, Mike, just want to remind you to put sold on #9, 10, and 57. I wanted the cooler bottle and bracket, and the a/c controls. Thanks!

[HDBOB]

gonna pass on the gauge's. The bezel looked chrome on page 1.
Thanks !

[tanman722001]

Do you still have the visor and clips?If so what would shipping be to 27028?Thanks Tony

[Ironhorse]

Hey Mike, Enjoyed talking to you at the swap meet. 'Preciate the column and brackets, another piece of the puzzle in the picture is set in place for my stick to auto swap. Column should clean up quite nicely with a little elbow grease, prime and paint. Met up with Randy, aka teeitup, and got my Edelbrock carb from him (Thanks again Randy, if you see this) and then was able to find a nice sbc Edelbrock Performer intake to set it on. Changing my truck from cast iron 2bbl intake with Rochester 2AGV carb. Have original style valve covers, 4 bbl carb spacer, 4x4 dip stick, and 4x4 oil fill tube to install also. Really looking forward to all this change coming up on my truck.

[Cash3481]

WR Welton: Sorry Sir, no bracket to match yours on this truck!

Critterman: Cant find the last A/C Bracket from the valve Cover. If I locate it Ill PM you.

McBassin: Tail harness pics below. Lots of splices and some pinched areas. See pics.

Tanman722001: Sorry Clips and visors sold to Jimmer 1964

Michael Bustamane: Pics of the breakline for you. P/S only the other line busted in removal. Pics are a little blurry but in all a decent line. P/O didnt use a line wrench and burgered up one of the sides. I used a line wrench and it came right off.

Ironhourse: I had a good visit too, always nice to visit with someone that loves these trucks. If that knee keeps bothering you and you need some extra hands give me a call and Ill see if I can swing over to assist.

HDBOB: Thanks for the reply sorry it doesnt work for you.

[Cash3481]

DaHos: here is the pics of the manifold you requested. Im being told these are planged style. Not sure if they are correct for the year.

69LowBurb: Pics of the BB fan shroud and high hump again for you to review. If the price is off let me know. If no answer Ill move on to next in line.

[cc_bob]

I'm interested in the intermediate shaft with shipping to 44021.

"64. Interm. steering shaft-- $10.00 "

Thanks,
Bob

[Cash3481]

Originally Posted by cc_bob

I'm interested in the intermediate shaft with shipping to 44021.

"64. Interm. steering shaft-- $10.00 "

Thanks,
Bob

CC_bob looks like $9.51 for parcel post. let me know and Ill pm you my paypal.
Mike

[72cheyenneman]

Mike....I got the bolts--fast shipping! Thanks. I may need more miscellaneous stuff and I'll PM you to see if you have them as my restoration goes on. Thanks again, Casey

[Cash3481]

DD1: $118 for the A/C parts, washer bracket, bottle and dome light and shipping on those 2 huge boxes is $58.76.
Thats not bad for 2 boxes that size. Let me know if thats ok and Ill PM you the paypal or money order... its up to you. Mike

[DD1]

Payment sent! Thanks!

[Cash3481]

Originally Posted by DD1

Payment sent! Thanks!

DD1 Thank you! I'll ship tomorrow at lunch.
Posted via Mobile Device

[Cash3481]

Local guy tried to lowball me. So here is the BB leftover items still for sale.
BB high hump $90 Shipped to lower 48
BB fan Shroud $90 Shipped to lower 48
Automatic brake pedal $35 plus the ride
400 Gas pedal $35 plus the ride.

Mike