CA Dummy Filler Neck/Tank Delete for 67-72 Trucks with Removed In-Cab Tank - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67C10Step · 03-25-2022, 07:42 PM

No worries on my part. I’ve had one project inhibit the progress of another many, many times.

**pjmoreland** · 03-25-2022, 08:03 PM

Quote:

Originally Posted by 67C10Step

No worries on my part. I’ve had one project inhibit the progress of another many, many times.

Thanks!

crumc10 · 03-29-2022, 07:15 PM

Payment sent for mine. Thanks

**pjmoreland** · 03-29-2022, 07:16 PM

Quote:

Originally Posted by crumc10

Payment sent for mine. Thanks

Payment received. Thank you. Will ship tomorrow.

**mkmc69** · 03-30-2022, 10:57 AM

I'll take one.

**pjmoreland** · 03-30-2022, 11:04 AM

Quote:

Originally Posted by mkmc69

I'll take one.

PM sent. Thank you.

**Johnl48** · 04-01-2022, 07:03 PM

Got mine today....excellent....thank you

**pjmoreland** · 04-01-2022, 07:16 PM

Quote:

Originally Posted by Johnl48

Got mine today....excellent....thank you

That was a quick trip from coast to coast.

67C10Step · 04-01-2022, 09:15 PM

Quote:

Originally Posted by pjmoreland

That was a quick trip from coast to coast.

Mine is in Nebraska. Didn’t know Nebraska was between California and Arkansas. Must use a different map than I look at.

**pjmoreland** · 04-02-2022, 02:13 AM

Quote:

Originally Posted by 67C10Step

Mine is in Nebraska. Didn’t know Nebraska was between California and Arkansas. Must use a different map than I look at.

It's taking the scenic route

1stchevy · 04-02-2022, 04:55 PM

I’ll take one

**pjmoreland** · 04-02-2022, 05:14 PM

Quote:

Originally Posted by 1stchevy

I’ll take one

Excellent. PM sent

67C10Step · 04-04-2022, 03:58 PM

Received today. Looks fantastic and cannot wait to put it in. Gotta get it done while the seat is still out that's for sure.

**pjmoreland** · 04-04-2022, 03:59 PM

Quote:

Originally Posted by 67C10Step

Received today. Looks fantastic and cannot wait to put it in. Gotta get it done while the seat is still out that's for sure.

Having the seat out will make it way easier to get the screws started.

Knight72 · 04-08-2022, 12:59 PM

You still have 2 left?

**pjmoreland** · 04-08-2022, 01:06 PM

Quote:

Originally Posted by Knight72

You still have 2 left?

I do, but I'm going to give businessgoose until Monday to buy them. They will be available after that. I do have this one e available for sale now:

https://67-72chevytrucks.com/vboard/...47#post9061347

**pjmoreland** · 04-11-2022, 10:07 PM

I haven't heard back from businessgoose in two weeks, so I've got two more units that are available. I am out of town right now, so I won't be able to ship anything until next Monday.

Knight72 · 04-12-2022, 06:46 AM

Quote:

Originally Posted by pjmoreland

I haven't heard back from businessgoose in two weeks, so I've got two more units that are available. I am out of town right now, so I won't be able to ship anything until next Monday.

I'd like to get one of the two you have left from this batch. Please shoot me your PayPal when you get a moment

**pjmoreland** · 04-12-2022, 11:27 AM

Quote:

Originally Posted by Knight72

I'd like to get one of the two you have left from this batch. Please shoot me your PayPal when you get a moment

PM sent. Thank you

1stchevy · 04-14-2022, 06:23 PM

Got mine and it’s a nice piece. Thanks!

**pjmoreland** · 04-14-2022, 06:25 PM

Quote:

Originally Posted by 1stchevy

Got mine and it’s a nice piece. Thanks!

I'm glad to hear it!

**pjmoreland** · 04-26-2022, 12:23 PM

To install an AC power outlet on the back of the dummy filler neck, the following modifications are required:

1) Use a 100° countersink tool to cut countersinks in the four holes closest to the center of the clamp plate. The outer diameter of the countersinks should be .385". Use low speed to prevent chatter.

2) Cut threads in the two smaller holes with an #8-32 tap.

3) Use a drill to remove the four bridges that hold in the center plug. Once the center plug is removed, use a curved file to remove any burrs. Apply touch-up paint to the exposed rim of the hole.

Use four #10-32 x 3/8" flat-head screws with a 100° head to attach the clamp plate to the filler neck.
https://www.mcmaster.com/91771A963/

Use two #8-32 x 7/32" pan-head screws to attach the AC outlet to the clamp plate.
https://www.mcmaster.com/91772A872/

SD69C10 · 04-26-2022, 03:18 PM

Received mine last week...Awesome piece!!! Thank you!

Fraud · 05-02-2022, 06:33 PM

I received mine as well, it'll be a while before I use it but the quality is amazing. Thank you!

**pjmoreland** · 05-02-2022, 06:34 PM

Quote:

Originally Posted by Fraud

I received mine as well, it'll be a while before I use it but the quality is amazing. Thank you!

Excellent. Thank you. I'd love to see some photos of it once it is installed.

03-25-2022, 07:42 PM	#101
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank No worries on my part. I’ve had one project inhibit the progress of another many, many times. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

03-29-2022, 07:15 PM	#103
crumc10 Registered User Join Date: Jan 2010 Location: Chuckey, TN Posts: 35	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Payment sent for mine. Thanks

03-30-2022, 10:57 AM	#105
mkmc69 Senior Member Join Date: Jan 2009 Location: Logansport,In Posts: 555	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank I'll take one.

04-01-2022, 07:03 PM	#107
Johnl48 Senior Member Join Date: Jun 2021 Location: West milford nj Posts: 328	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Got mine today....excellent....thank you

04-02-2022, 04:55 PM	#111
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank I’ll take one

04-04-2022, 03:58 PM	#113
67C10Step Registered User Join Date: Jul 2019 Location: Beebe, AR Posts: 2,471	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Received today. Looks fantastic and cannot wait to put it in. Gotta get it done while the seat is still out that's for sure. __________________ 1967 C10 1980 Jeep CJ5 2020 Toyota 4Runner 2024 Toyota Tundra

04-08-2022, 12:59 PM	#115
Knight72 Registered User Join Date: Aug 2016 Location: Southside, Alabama Posts: 173	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank You still have 2 left? __________________ 72 C10 lwb fleetside aka Big Rhonda. Still plugging away. Build thread: http://67-72chevytrucks.com/vboard/s...42#post8247142

04-11-2022, 10:07 PM	#117
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,765	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank I haven't heard back from businessgoose in two weeks, so I've got two more units that are available. I am out of town right now, so I won't be able to ship anything until next Monday.

04-14-2022, 06:23 PM	#120
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Got mine and it’s a nice piece. Thanks!

04-26-2022, 12:23 PM	#122
pjmoreland Senior Member Join Date: Jan 2005 Location: CA Posts: 5,765	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank To install an AC power outlet on the back of the dummy filler neck, the following modifications are required: 1) Use a 100° countersink tool to cut countersinks in the four holes closest to the center of the clamp plate. The outer diameter of the countersinks should be .385". Use low speed to prevent chatter. 2) Cut threads in the two smaller holes with an #8-32 tap. 3) Use a drill to remove the four bridges that hold in the center plug. Once the center plug is removed, use a curved file to remove any burrs. Apply touch-up paint to the exposed rim of the hole. Use four #10-32 x 3/8" flat-head screws with a 100° head to attach the clamp plate to the filler neck. https://www.mcmaster.com/91771A963/ Use two #8-32 x 7/32" pan-head screws to attach the AC outlet to the clamp plate. https://www.mcmaster.com/91772A872/ Attached Images Last edited by pjmoreland; 07-28-2022 at 12:14 PM.

04-26-2022, 03:18 PM	#123
SD69C10 Registered User Join Date: Aug 2020 Location: San Diego, CA Posts: 76	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank Received mine last week...Awesome piece!!! Thank you! __________________ 1966 Ford Mustang 1969 Chevy C10 1971 Chevy C20

05-02-2022, 06:33 PM	#124
Fraud Registered User Join Date: Nov 2016 Location: Seattle WA Posts: 96	Re: Dummy Filler Neck for 67-72 Trucks with Removed In-Cab Tank I received mine as well, it'll be a while before I use it but the quality is amazing. Thank you!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.