NY Parting a '72 Blazer 4x4 - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

sam302psu · 01-21-2012, 09:35 AM

Do you still have the front and rear diffs? Are the disc brake parts intact? Looking to change my 70 over and need everything. If so how much?

**Ironhorse** · 01-21-2012, 10:13 AM

Probably a long shot at best but was this Blazer auto or stick shift? If auto with a TH350 I'm looking for the shift linkage complete from column/frame to trans. I'm converting my '71 4x4 long bed from sm465/np-205 to TH350/np-205 and need the complete set up. Looking to buy or hoss tradin parts is always good. Also looking for the bolt in trans hump for an auto 4x4.

ORANGBLAZ · 01-21-2012, 01:23 PM

Quote:

Originally Posted by Ironhorse

Probably a long shot at best but was this Blazer auto or stick shift? If auto with a TH350 I'm looking for the shift linkage complete from column/frame to trans. I'm converting my '71 4x4 long bed from sm465/np-205 to TH350/np-205 and need the complete set up. Looking to buy or hoss tradin parts is always good. Also looking for the bolt in trans hump for an auto 4x4.

Blazer was a 4-spd., but I do have some auto linkage sets, and a hi-hump for a 4x4 with a TH350/NP205.

ORANGBLAZ · 01-21-2012, 01:20 PM

Quote:

Originally Posted by sam302psu

Do you still have the front and rear diffs? Are the disc brake parts intact? Looking to change my 70 over and need everything. If so how much?

I do have a D44 out of another '72 Blazer. What do you need? Knuckles, caliper brackets, hubs?

sam302psu · 01-23-2012, 08:46 AM

Quote:

Originally Posted by ORANGBLAZ

I do have a D44 out of another '72 Blazer. What do you need? Knuckles, caliper brackets, hubs?

Yes! I would be interested in everything. What would you want for the all of that hardware?

ORANGBLAZ · 01-23-2012, 12:18 PM

Quote:

Originally Posted by sam302psu

Yes! I would be interested in everything. What would you want for the all of that hardware?

Let me get it apart and check the condition, and then we can deal.

**Ironhorse** · 01-24-2012, 06:07 PM

ORANGEBLAZ, Just checking with you to see if you had any luck in locating all the necessary pieces for 4x4 auto column linkage. If you do have it, up for any trades? Truck or Blazer only? Have a couple NICE Blazer dealer brochures if interested, really nice open 6 lug 4x4 rally caps, nice a/c control with all three cable and one broken arm, other items ...... what trips your trigger?

ORANGBLAZ · 01-25-2012, 04:53 PM

Quote:

Originally Posted by sam302psu

Yes! I would be interested in everything. What would you want for the all of that hardware?

I removed one side today and noticed that the dust shields are MIA. They were spot welded to the caliper brackets, but have rusted off. Do you still want them?

**Ironhorse** · 01-25-2012, 05:19 PM

ORANGEBLAZ, I need the complete setup to include the trans gear selector as starting from scratch and have nothing at all. Have two differant dealer brochures, one is for the '70 model, 8 pages, Blazer specific only, engine & frame & chassis pics, also interior options. The other is also '70, covers from Blazer, El Camino, 'Burbs and panels, van and big truck tilts, several truck/camper & 'Burb/travel trailer combination pics on back page. Both brochures are August, 69 print. Have several of the '70 Blazer specific brochure, 1 only of the Blazer to big truck brochure.

sam302psu · 01-25-2012, 08:06 PM

Quote:

Originally Posted by ORANGBLAZ

I removed one side today and noticed that the dust shields are MIA. They were spot welded to the caliper brackets, but have rusted off. Do you still want them?

Yes I would still be interested. What were you thinking on the price?

**DeadheadNM** · 01-21-2012, 01:23 PM

Chuck - Any chance you have a set(s) of Blazer under dash lights w intact harness? The ones that come on when the doors are opened. Hope all is well. Pete

ORANGBLAZ · 01-21-2012, 01:27 PM

Quote:

Originally Posted by DeadheadNM

Chuck - Any chance you have a set(s) of Blazer under dash lights w intact harness? The ones that come on when the doors are opened. Hope all is well. Pete

Hey Pete! I may, but it will take some digging.

**DeadheadNM** · 01-21-2012, 01:30 PM

Quote:

Originally Posted by ORANGBLAZ

Hey Pete! I may, but it will take some digging.

Keep me in mind and if you happen to turn a set up LMK. No rush. Plenty other stuff to work on at the moment. Thanks. Pete

huntfishride · 01-21-2012, 02:03 PM

How about front leaf springs? Price?
Posted via Mobile Device

ORANGBLAZ · 01-21-2012, 02:07 PM

Quote:

Originally Posted by huntfishride

How about front leaf springs? Price?
Posted via Mobile Device

Sorry, no springs.

**Ironhorse** · 01-21-2012, 04:35 PM

May have a line on a high hump but am interested in the complete auto linkage setup. Best price shipped to 67152, yuo up for any trades. Always like doing the parts trading if at all possible. Are you looking for anything?

ORANGBLAZ · 01-22-2012, 02:01 PM

Quote:

Originally Posted by Ironhorse

May have a line on a high hump but am interested in the complete auto linkage setup. Best price shipped to 67152, yuo up for any trades. Always like doing the parts trading if at all possible. Are you looking for anything?

Let me dig them out and make sure all the pieces are there.
Looking for a decent set of rear wheel tubs. If not, LMK what else you have.

**Ironhorse** · 01-22-2012, 06:18 PM

Can't help on a pair of decent rear wheel well tubs. Parting out a '70 3/4 ton 2wd CustomCamper but the tubs are pretty well beat. Factory a/c, most parts are there but engine side a/c housing has a chunk missing. Nice looking control unit, have to look if any arms broken. Are you looking for Blazer only or pickup parts also? Let me know on the 4x4 auto shift linkage. Thanks.

themb2g · 01-29-2012, 12:53 AM

does it happen to have a dash panel with AC? if so can you send me some pics.

ORANGBLAZ · 01-29-2012, 11:50 AM

Quote:

Originally Posted by themb2g

does it happen to have a dash panel with AC? if so can you send me some pics.

Sorry-no AC. I will be checking out some more parts trucks soon, and if I find one I will let you know.

themb2g · 01-29-2012, 12:29 PM

Quote:

Originally Posted by ORANGBLAZ

Sorry-no AC. I will be checking out some more parts trucks soon, and if I find one I will let you know.

Thanks!

capev86 · 01-29-2012, 12:31 PM

Quote:

or the Yankees over the Red Sox

bite your tongue...that's blasphemy, that is. imagine if ancient people had wanted Goliath to win instead of David!

actually, there are quite a few "Skankees" fans up here in Maine (there shouldn't be any north of CT unless they are transplants IMO), considering the proxity to Boston vs NYC. the Red Sox are more yankee than the Yankees. but to each his own. the rivalry will go on long after we are all dead!

as for the Patriots, they have had a pretty good track record the last few years, so I guess I can forgive you guys for grumbling!

1tuff71 · 01-29-2012, 07:52 PM

got any hardware for a rear hatch. looking for the pieces that attach to the handle.

ORANGBLAZ · 01-29-2012, 08:58 PM

Quote:

Originally Posted by 1tuff71

got any hardware for a rear hatch. looking for the pieces that attach to the handle.

I do have a couple of busted hatches I can part out. I will check them in the next few days to see what's good.

ORANGBLAZ · 02-01-2012, 05:13 PM

Quote:

Originally Posted by 1tuff71

got any hardware for a rear hatch. looking for the pieces that attach to the handle.

I have six hatches, and all the hardware is rusty junk.

01-21-2012, 09:35 AM	#1
sam302psu Registered User Join Date: Nov 2011 Location: Chambersburg, PA Posts: 12	Re: Parting a '72 Blazer 4x4 Do you still have the front and rear diffs? Are the disc brake parts intact? Looking to change my 70 over and need everything. If so how much?

01-21-2012, 10:13 AM	#2
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,099	Re: Parting a '72 Blazer 4x4 Probably a long shot at best but was this Blazer auto or stick shift? If auto with a TH350 I'm looking for the shift linkage complete from column/frame to trans. I'm converting my '71 4x4 long bed from sm465/np-205 to TH350/np-205 and need the complete set up. Looking to buy or hoss tradin parts is always good. Also looking for the bolt in trans hump for an auto 4x4. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-24-2012, 06:07 PM	#7
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,099	Re: Parting a '72 Blazer 4x4 ORANGEBLAZ, Just checking with you to see if you had any luck in locating all the necessary pieces for 4x4 auto column linkage. If you do have it, up for any trades? Truck or Blazer only? Have a couple NICE Blazer dealer brochures if interested, really nice open 6 lug 4x4 rally caps, nice a/c control with all three cable and one broken arm, other items ...... what trips your trigger? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-25-2012, 05:19 PM	#9
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,099	Re: Parting a '72 Blazer 4x4 ORANGEBLAZ, I need the complete setup to include the trans gear selector as starting from scratch and have nothing at all. Have two differant dealer brochures, one is for the '70 model, 8 pages, Blazer specific only, engine & frame & chassis pics, also interior options. The other is also '70, covers from Blazer, El Camino, 'Burbs and panels, van and big truck tilts, several truck/camper & 'Burb/travel trailer combination pics on back page. Both brochures are August, 69 print. Have several of the '70 Blazer specific brochure, 1 only of the Blazer to big truck brochure. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-21-2012, 01:23 PM	#11
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,320	Re: Parting a '72 Blazer 4x4 Chuck - Any chance you have a set(s) of Blazer under dash lights w intact harness? The ones that come on when the doors are opened. Hope all is well. Pete __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

01-21-2012, 02:03 PM	#14
huntfishride Registered User Join Date: Nov 2011 Location: Cedar City, Utah Posts: 19	Re: Parting a '72 Blazer 4x4 How about front leaf springs? Price? Posted via Mobile Device

01-21-2012, 04:35 PM	#16
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,099	Re: Parting a '72 Blazer 4x4 May have a line on a high hump but am interested in the complete auto linkage setup. Best price shipped to 67152, yuo up for any trades. Always like doing the parts trading if at all possible. Are you looking for anything? __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-22-2012, 06:18 PM	#18
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,099	Re: Parting a '72 Blazer 4x4 Can't help on a pair of decent rear wheel well tubs. Parting out a '70 3/4 ton 2wd CustomCamper but the tubs are pretty well beat. Factory a/c, most parts are there but engine side a/c housing has a chunk missing. Nice looking control unit, have to look if any arms broken. Are you looking for Blazer only or pickup parts also? Let me know on the 4x4 auto shift linkage. Thanks. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

01-29-2012, 12:53 AM	#19
themb2g Registered User Join Date: Jul 2010 Location: Portland, Oregon Posts: 411	Re: Parting a '72 Blazer 4x4 does it happen to have a dash panel with AC? if so can you send me some pics.

01-29-2012, 07:52 PM	#23
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 461	Re: Parting a '72 Blazer 4x4 got any hardware for a rear hatch. looking for the pieces that attach to the handle.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.