lets see your custom touches - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mud.man.rj · 08-06-2014, 10:26 PM

Lucky guy Ben, nice car and truck.

71veronica · 08-08-2014, 09:03 AM

Quote:

Originally Posted by Willys47

took a tailgate that had the bottom smashed from a car that didnt stop fast enough and put my last name on it

How did u do that. That is the awesome

ho70 · 08-08-2014, 10:52 AM

Quote:

Originally Posted by 71veronica

How did u do that. That is the awesome

The only way I could do it -is if I changed my last name to CHEVROLET.....LOL

JRANGER · 08-08-2014, 12:03 PM

Didnt like the big wrap around stepside bumper and it was welded on so i couldnt replace it. So i chopped it, welded on sides, and painted it

stroked1969 · 08-08-2014, 01:43 PM

Not nearly as creative and skilled as some of the ideas on here... But just a little something different.
I needed some mirrors after my factory ones were scrapped and smoothed over after the paint work. Wanted something just a but different. Decided to put 70-72 chevelle mirrors on. Close to stock but a bit "custom" I guess

Willys47 · 08-08-2014, 03:56 PM

I cut out and rearranged the letters and flipped the V to fake the A .I then tacked them together as flat and strait as I could get them. If you ever get the chance to get the magnets out of a computer hard drive ,they are extreamy strong and work well at holding pannel edges in place.

PanteraRazorback · 08-08-2014, 08:27 PM

I got the itch to shave my dash pad and it ended up spiraling out of control

Name: IMG_2582.jpg
Views: 1683
Size: 43.1 KB

Name: IMG_2584.jpg
Views: 1682
Size: 41.3 KB

jus2qwk · 01-12-2015, 02:26 PM

Quote:

Originally Posted by BossHogg69

that mod from jus2qwk is one of my favorite in this thread so far. If my bodywork wasn't already complete I would've stolen it!!

thanks... its the little thing that most people will never notice that I think really make a truck

jtp67-72 · 01-12-2015, 10:41 PM

Forgot i finally got dash painted and a few custom billet pieces....more coming...jim

lsjrl07 · 12-31-2015, 11:22 AM

Quote:

Originally Posted by track70

made my own radio delete plate out of stainless and installed some gauges in it

Also made a mount to put my radio where my heater controls went!

Did you keep the dimensions for the Stainless Panel? I want to do this same setup in mine. The PO butchered the radio hole..

snipescastle2 · 12-31-2015, 05:04 PM

Mother of pearl Dash/glove box decals.......

Bomp · 12-31-2015, 05:18 PM

Before and After.

stake pockets.
Before and After

Foot Stomper · 12-31-2015, 05:35 PM

Very cool mods! Subscribed!

hamjet · 12-31-2015, 05:55 PM

Put "348" on the front fender, put a Colt shifter handle on a manual floor shifter I converted for the 2004-r transmission, and a 1960 348 with 3x2s I rebuilt over the winter.

Cmvcruiser · 12-31-2015, 06:00 PM

There's amazing talent on this thread. Talent that gives each truck their own personality. Good stuff!!
Just bought a 70 GMC and I am new to the forum, so doing a lot of reading

Bomp · 01-01-2016, 05:24 PM

Since I can't leave well enough alone.
Rolled a straight tube, welded it together, drilled holes, welded in center section, still a work in progress.

toolboxchev · 01-01-2016, 06:26 PM

The amount of ideas that are moving right now are amazing! Thanks to all of those posted, I have got my work cut out for me now!

Some of you are quite ingenious, and have spurred something that is out of control!

Bomp · 01-01-2016, 09:17 PM

Quote:

Originally Posted by toolboxchev

The amount of ideas that are moving right now are amazing! Thanks to all of those posted, I have got my work cut out for me now!

Some of you are quite ingenious, and have spurred something that is out of control!

Have to get together sometime. You're right up the road from me.

toolboxchev · 01-02-2016, 01:31 AM

Quote:

Originally Posted by Turbo1dr

Why doesn't anyone cut the dash for a 7" GPS/Radio/CD/DVD/Bluetooth/Telephone receiver? Is there not enough room behind it for one of those to fit? Just wondering why?

Please take no offense, I believe some around these parts would prefer to be shot than put that stuff in their rig.

But then again....

snipescastle2 · 01-02-2016, 11:13 AM

Vic Cook has modified his 67' for a "Double Din" sized radio for his dash....
check that out here:

Post #392

http://67-72chevytrucks.com/vboard/s...563833&page=16
Ben

68Stepbed · 03-23-2016, 04:32 PM

Quote:

Originally Posted by track70

made my own radio delete plate out of stainless and installed some gauges in it

Also made a mount to put my radio where my heater controls went!

What did you have to do to get the radio in the heater control slot?

Dad's72 · 03-25-2016, 09:13 AM

Quote:

Originally Posted by 88fordf150

Fenderwall headers make for a 55 Chevy. Custom headliner made from copy's of my autographed magazines. Stars and stripes tach. and gauges. Custom shift knob from grandpa bar.

This gives me an idea. I wanted a way to commemorate the truck build to my father. I got it from him a couple months before he passed away. He was 37 years Air Force and was in Viet-Nam for several years. After he passed away I was going through his stuff and found a bunch of old Hot-Rod magazines from the 60's with Viet-Nam address where he was stationed. That would make an awesome headliner and tie him to the truck. Conversation piece for sure.

Andy4639 · 03-25-2016, 10:20 AM

I added the whole billet gas pedal assembly and the brake pedal cover yesterday to my 71.

kehstr · 03-25-2016, 11:45 AM

Love this thread!!

skorpioskorpio · 03-26-2016, 03:09 PM

Quote:

Originally Posted by hamjet

Put "348" on the front fender, put a Colt shifter handle on a manual floor shifter I converted for the 2004-r transmission, and a 1960 348 with 3x2s I rebuilt over the winter.

Diggin' the double-ya!

08-06-2014, 10:26 PM	#101
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: lets see your custom touches Lucky guy Ben, nice car and truck.

08-08-2014, 12:03 PM	#104
JRANGER Registered User Join Date: Nov 2011 Location: Nashville TN Posts: 3,595	Re: lets see your custom touches Didnt like the big wrap around stepside bumper and it was welded on so i couldnt replace it. So i chopped it, welded on sides, and painted it Attached Images __________________ PLEASE HELP WITH PROJECT UNDERHAULIN http://67-72chevytrucks.com/vboard/showthread.php?t=306320 Gemini - 1978 GMC C15 High Sierra - 305 c/e - Given to Mother Electra - 1967 Mustang Coupe - 302/w 3 speed Build Chyna - 1968 Chevy C20 Long Stepper

08-08-2014, 01:43 PM	#105
stroked1969 Registered User Join Date: Jul 2014 Location: Cowtown, Alberta Posts: 5	Re: lets see your custom touches Not nearly as creative and skilled as some of the ideas on here... But just a little something different. I needed some mirrors after my factory ones were scrapped and smoothed over after the paint work. Wanted something just a but different. Decided to put 70-72 chevelle mirrors on. Close to stock but a bit "custom" I guess Attached Images __________________ 1969 C10 Stepside 72 Frontgrill and bumpers (cause I like it better Drop spindles on disc brake conversion up front. 3.55 Posi rear 496 Stroker with performer heads and forged guts, beafy cam etc etc

08-08-2014, 03:56 PM	#106
Willys47 Registered User Join Date: Dec 2007 Location: Nanaimo B.C. Posts: 604	Re: lets see your custom touches I cut out and rearranged the letters and flipped the V to fake the A .I then tacked them together as flat and strait as I could get them. If you ever get the chance to get the magnets out of a computer hard drive ,they are extreamy strong and work well at holding pannel edges in place. Attached Images __________________ I was hooked on these trucks since 1982 when I drove my budys fathers 1968 Custum GMC 396 automatic dana 60 rear with a power lock diff what a ride more fun then we will we can ever tell!!

08-08-2014, 08:27 PM	#107
PanteraRazorback Registered User Join Date: Apr 2010 Location: Medicine Hat, Alberta Posts: 88	Re: lets see your custom touches I got the itch to shave my dash pad and it ended up spiraling out of control __________________ Build Thread: 71 SWB Slammed-Shaved-6.0

01-12-2015, 10:41 PM	#109
jtp67-72 Registered User Join Date: Apr 2007 Location: dequincy la. Posts: 1,465	Re: lets see your custom touches Forgot i finally got dash painted and a few custom billet pieces....more coming...jim Attached Images __________________ Build thread at http://67-72chevytrucks.com/vboard/s...d.php?t=475791

12-31-2015, 05:04 PM	#111
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: lets see your custom touches Mother of pearl Dash/glove box decals....... Attached Images

12-31-2015, 05:18 PM	#112
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: lets see your custom touches Before and After. stake pockets. Before and After

12-31-2015, 05:35 PM	#113
Foot Stomper Registered User Join Date: Oct 2015 Location: Calgary, Alberta Posts: 1,252	Re: lets see your custom touches Very cool mods! Subscribed! __________________ So when is this "Old enough to know better" supposed to kick in? My 1959 GMC build thread http://67-72chevytrucks.com/vboard/s...d.php?t=686989

12-31-2015, 05:55 PM	#114
hamjet Registered User Join Date: Apr 2013 Location: South Westerlo, New York Posts: 1,325	Re: lets see your custom touches Put "348" on the front fender, put a Colt shifter handle on a manual floor shifter I converted for the 2004-r transmission, and a 1960 348 with 3x2s I rebuilt over the winter. Attached Images __________________ Thanks, Joe.. 1969 C/10, 348 C.I., 3X2 bbl. V8, 2004r , LWB.

12-31-2015, 06:00 PM	#115
Cmvcruiser Registered User Join Date: Dec 2015 Location: Greer SC Posts: 16	Re: lets see your custom touches There's amazing talent on this thread. Talent that gives each truck their own personality. Good stuff!! Just bought a 70 GMC and I am new to the forum, so doing a lot of reading __________________ 1970 GMC 350/350 PS,PB

01-01-2016, 05:24 PM	#116
Bomp Registered User Join Date: Apr 2011 Location: . Posts: 3,104	Re: lets see your custom touches Since I can't leave well enough alone. Rolled a straight tube, welded it together, drilled holes, welded in center section, still a work in progress.

01-01-2016, 06:26 PM	#117
toolboxchev Registered User Join Date: Jul 2015 Location: 2nd left past the stump on a dirt road. Posts: 2,629	Re: lets see your custom touches The amount of ideas that are moving right now are amazing! Thanks to all of those posted, I have got my work cut out for me now! Some of you are quite ingenious, and have spurred something that is out of control!

01-02-2016, 11:13 AM	#120
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: lets see your custom touches Vic Cook has modified his 67' for a "Double Din" sized radio for his dash.... check that out here: Post #392 http://67-72chevytrucks.com/vboard/s...563833&page=16 Ben

03-25-2016, 10:20 AM	#123
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: lets see your custom touches I added the whole billet gas pedal assembly and the brake pedal cover yesterday to my 71. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 03-25-2016 at 10:31 AM.



Register or Log In To remove these advertisements.

03-25-2016, 11:45 AM	#124
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: lets see your custom touches Love this thread!!

Register or Log In To remove these advertisements.