New 64 Stepper Project - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 04-02-2017, 12:13 PM

I should have put this hear but forgot - After seeing 64shortbox’s brake pedal I had to give it a go. I received a Camaro pedal arm and cut the pedal off at the back of the pedal from the arm.
Cut the stock pedal off the stock arm and prepped everything to weld out.
Now I just have to find a local welder.
I may have it tacked on the truck to make sure it's straight though.

**The Rocknrod** · 05-24-2017, 05:58 PM

So I pretty much smoothed the firewall of mounting holes and will be using these weld mount studs to mount the AC unit, Fuse Block etc inside.

**The Rocknrod** · 05-24-2017, 06:00 PM

Went over to The Truck Shop in Orange and got a few things, firewall grommets etc. Oh and to Mooneyes for the fuel gauge and Swagelok for the fuel line fitting.

**The Rocknrod** · 05-24-2017, 06:19 PM

Okay I got some p ics from the painter this afternoon. I will be back in Texas Sunday night so I wont be able to see the work till Tuesday.

**The Rocknrod** · 05-24-2017, 06:21 PM

The last ones so far, more next week.

schpeen · 05-24-2017, 07:39 PM

shaaaaaawingggggg!

**The Rocknrod** · 05-25-2017, 04:19 PM

Also picked up a wiring harness and fuse panel, all the stuff to make a relay panel like the one shown below and a main power ground buss for inside the cab.

**The Rocknrod** · 05-31-2017, 12:37 PM

Yep, not much change since the last pics at the paint shop. But I did clean up my shop after having been gone so long there were many bugs - crickets. So I vacuumed every inch of the shop - piles of them. Even a big ol black and yellow centipede (found dead), I guess the bug guy works. Momma found a bark scorpion in the house and freaked.

**The Rocknrod** · 06-03-2017, 06:26 AM

Not going to be too active for a bit as I'm without a job for a while so I'm kind of looking at other venues - "We keep you alive to serve this ship. Row well, and live"

**Captainfab** · 06-04-2017, 12:33 AM

Sorry to hear that. I hope the job search goes well and quick for you.

Prflyer1 · 06-04-2017, 12:39 AM

Quote:

Originally Posted by The Rocknrod

The last ones so far, more next week.

This are the builds that make me want to go out and start sanding the patina of my truck and get it painted! lol looks great, love that red/beige or cream combination

**The Rocknrod** · 06-05-2017, 09:33 AM

Quote:

Originally Posted by Captainfab

Sorry to hear that. I hope the job search goes well and quick for you.

Me too Captainfab - Thanks.

Quote:

Originally Posted by Prflyer1

This are the builds that make me want to go out and start sanding the patina of my truck and get it painted! lol looks great, love that red/beige or cream combination

Thank you for the encouragement.

**The Rocknrod** · 06-19-2017, 01:49 PM

Well their cut and buffing a bit on it.

**The Rocknrod** · 06-21-2017, 01:41 PM

Found the owner hittin it, step one buffing compound (there are 3 steps).

**The Rocknrod** · 07-08-2017, 08:20 AM

Picture of my rear disc brake kit.

**The Rocknrod** · 07-28-2017, 06:09 PM

Just stopped in at the paint shop and they put the rear fenders on.

**The Rocknrod** · 07-31-2017, 06:26 PM

Other side, front is dusty.

**The Rocknrod** · 08-01-2017, 05:55 PM

Hard to believe its been that long - http://67-72chevytrucks.com/vboard/s...4&postcount=46
What about 24 work days to go as of 16 Aug 17.

**The Rocknrod** · 08-08-2017, 01:56 PM

Steps put on.

64shortbox · 08-18-2017, 11:27 PM

Wow!! Just checked out your build for the first time! Great Job! I'm jealous! I see in your earlier post you're going to build a relay and fuse board to go along with your new wiring harness & fuse block. I plan on doing the same but I recently found these fused 4 pin relays. It puts the fuses & relays in one neat package. I just ordered some off ebay but they haven't arrived yet. Check out the link and let me know what you think:

http://www.ebay.com/itm/Lot5-12V-30A....c100012.m1985

**pimpston65** · 08-18-2017, 11:33 PM

Quote:

Originally Posted by The Rocknrod

Steps put on.

oh baby, she's a looker!!!

**The Rocknrod** · 08-19-2017, 05:18 AM

Quote:

Originally Posted by 64shortbox

Wow!! Just checked out your build for the first time! Great Job! ...

Those relays are way cool making it easier to fuse a relay system. Good find on that.

I was recently looking at this due to the size and all, http://www.ebay.com/itm/Fuse-Box-6-R....c100005.m1851 You can cut down on the footprint of the fuse panel.
With the fused relays you could even buy a small fuse block like that without the relays in it and use those fuses.

**The Rocknrod** · 08-19-2017, 05:19 AM

Quote:

Originally Posted by pimpston65

oh baby, she's a looker!!!

Thanks buddy, I'm hoping she will be once the smoke is cleared. Still looking for a job though.

northern 85 · 08-19-2017, 08:11 AM

Yep nice looking truck!

**The Rocknrod** · 08-21-2017, 03:05 PM

Quote:

Originally Posted by northern 85

Yep nice looking truck!

Thank you northern85. I also did some brake pedal work as shown here:
http://67-72chevytrucks.com/vboard/s...&postcount=179

04-02-2017, 12:13 PM	#101
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project I should have put this hear but forgot - After seeing 64shortbox’s brake pedal I had to give it a go. I received a Camaro pedal arm and cut the pedal off at the back of the pedal from the arm. Cut the stock pedal off the stock arm and prepped everything to weld out. Now I just have to find a local welder. I may have it tacked on the truck to make sure it's straight though. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-24-2017, 05:58 PM	#102
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So I pretty much smoothed the firewall of mounting holes and will be using these weld mount studs to mount the AC unit, Fuse Block etc inside. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-24-2017, 06:00 PM	#103
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Went over to The Truck Shop in Orange and got a few things, firewall grommets etc. Oh and to Mooneyes for the fuel gauge and Swagelok for the fuel line fitting. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-24-2017, 06:19 PM	#104
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Okay I got some p ics from the painter this afternoon. I will be back in Texas Sunday night so I wont be able to see the work till Tuesday. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-24-2017, 06:21 PM	#105
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project The last ones so far, more next week. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-24-2017, 07:39 PM	#106
schpeen Registered User Join Date: Jun 2014 Location: fort lauderdale, florida Posts: 511	Re: New 64 Stepper Project shaaaaaawingggggg! __________________ 1991 K5 Blazer 4x4 "9 ball" 2019 Chevy Silverado Trail Boss 4x4 2018 Chevy Colorado 2 door ZR2 4x4 1988 23' Mako Marine 2005 Harley Davidson Road King

05-25-2017, 04:19 PM	#107
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Also picked up a wiring harness and fuse panel, all the stuff to make a relay panel like the one shown below and a main power ground buss for inside the cab. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-31-2017, 12:37 PM	#108
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Yep, not much change since the last pics at the paint shop. But I did clean up my shop after having been gone so long there were many bugs - crickets. So I vacuumed every inch of the shop - piles of them. Even a big ol black and yellow centipede (found dead), I guess the bug guy works. Momma found a bark scorpion in the house and freaked. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-03-2017, 06:26 AM	#109
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Not going to be too active for a bit as I'm without a job for a while so I'm kind of looking at other venues - "We keep you alive to serve this ship. Row well, and live" __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-04-2017, 12:33 AM	#110
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: New 64 Stepper Project Sorry to hear that. I hope the job search goes well and quick for you. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-19-2017, 01:49 PM	#113
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Well their cut and buffing a bit on it. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-21-2017, 01:41 PM	#114
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Found the owner hittin it, step one buffing compound (there are 3 steps). Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-08-2017, 08:20 AM	#115
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Picture of my rear disc brake kit. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-28-2017, 06:09 PM	#116
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Just stopped in at the paint shop and they put the rear fenders on. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

07-31-2017, 06:26 PM	#117
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Other side, front is dusty. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?



Register or Log In To remove these advertisements.

08-01-2017, 05:55 PM	#118
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Hard to believe its been that long - http://67-72chevytrucks.com/vboard/s...4&postcount=46 What about 24 work days to go as of 16 Aug 17. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? Last edited by The Rocknrod; 08-16-2017 at 04:00 PM.

08-08-2017, 01:56 PM	#119
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Steps put on. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

08-18-2017, 11:27 PM	#120
64shortbox Registered User Join Date: Jan 2011 Location: Tulare, CA Posts: 733	Re: New 64 Stepper Project Wow!! Just checked out your build for the first time! Great Job! I'm jealous! I see in your earlier post you're going to build a relay and fuse board to go along with your new wiring harness & fuse block. I plan on doing the same but I recently found these fused 4 pin relays. It puts the fuses & relays in one neat package. I just ordered some off ebay but they haven't arrived yet. Check out the link and let me know what you think: http://www.ebay.com/itm/Lot5-12V-30A....c100012.m1985 Attached Images

08-19-2017, 08:11 AM	#124
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: New 64 Stepper Project Yep nice looking truck!

Register or Log In To remove these advertisements.