Nik's 62 build - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

62stepside longbox · 12-18-2015, 11:55 AM

I can see the light!
This is a household light socket that the po put in. I put a 12 volt bulb in it and it works!

rusty76 · 12-18-2015, 04:19 PM

That's so cool. Years ago I used to use a five watt bulb in household socket hooked to my CB radio. It would light up when you talk or modulate. Really neat way of testing the radio.

62stepside longbox · 12-20-2015, 02:39 AM

Quote:

Originally Posted by rusty76

That's so cool. Years ago I used to use a five watt bulb in household socket hooked to my CB radio. It would light up when you talk or modulate. Really neat way of testing the radio.

Thanks, Sounds like a good idea

62stepside longbox · 12-20-2015, 02:56 AM

First day of Christmas break, so I got busy. Built a 1bbl to 2bbl adaptor plate out of aluminum. Ported and polished the inside so it should flow pretty good. Then I got started on the linkage, the pic below is the pedal assembly after I flipped the arm so when I give it gas it pulls instead of pushing. Then I built a rod with bends that goes from the pedal arm to the carb. Here's a video: http://youtu.be/PU0i3WgsB0Y

**Palf70Step** · 12-20-2015, 09:33 AM

Nice work on the linkage.

TJ's Chevy · 12-20-2015, 04:21 PM

Looks good. That a carb off a gmc v6?

62stepside longbox · 12-20-2015, 08:20 PM

Quote:

Originally Posted by Palf70Step

Nice work on the linkage.

Quote:

Originally Posted by TJ's Chevy

Looks good. That a carb off a gmc v6?

Thanks guys. No the carb is a carter that I got for free from my dad's plymouth sine he went to a 4bbl.

62stepside longbox · 12-21-2015, 07:21 PM

Made a cross member to put between the frame rails for the gas tank straps to bolt to. I will weld it in place later today.

62stepside longbox · 12-21-2015, 07:22 PM

02

62stepside longbox · 12-21-2015, 08:52 PM

Made some gas tank straps

TJ's Chevy · 12-21-2015, 09:17 PM

Cool, has the carter seemed to make a difference?

62stepside longbox · 12-22-2015, 02:38 AM

Not a huge difference but defiantly helps

62stepside longbox · 12-22-2015, 02:55 AM

Ok no pics right now but I finished all of the gas tank straps and mounts and bolted the tank in. Now it's time to pull it back off and get the bumper mounted so I know where to cut the hole for the gas filler.

62stepside longbox · 12-23-2015, 02:04 AM

Started working on mounting the bumper. Built one of two brackets that will be welded to the bumper and bolt to a piece of angle iron that will go inside the frame rails. I made the holes oblong so that the height of the bumper can be adjusted.

62stepside longbox · 12-23-2015, 06:44 PM

Number 2 is finished. The old set of files is sure getting a good workout

62stepside longbox · 12-23-2015, 09:34 PM

I found this inside my radio

65sub · 12-23-2015, 09:38 PM

Nice work on the bumper brackets. Did you really make the slots with a file?

TJ's Chevy · 12-23-2015, 10:01 PM

X2, Nice work.

62stepside longbox · 12-23-2015, 10:43 PM

Thanks guys. Yes I made them with a drill press, a hacksaw but mostly files. Took a while. Times like these when a cnc plasma cutter would come in handy

62stepside longbox · 12-26-2015, 01:47 AM

Installed my Christmas present! Sun pro super tach 2.
I'm impressed with the quality, compatibility and look.

TJ's Chevy · 12-26-2015, 01:25 PM

Nice!

rusty76 · 12-26-2015, 09:30 PM

Cool

sampsmit000 · 12-27-2015, 11:32 PM

I am also 15. I am doing a 1964 k10. Go on youtube and check out "gibson63" He is doing a 1963 chevy. He does some of the best work i have seen. shows the steps in great detail. I would go and watch some of his videos. he is amazing.

TJ's Chevy · 12-27-2015, 11:57 PM

Quote:

Originally Posted by sampsmit000

I am also 15. I am doing a 1964 k10. Go on youtube and check out "gibson63" He is doing a 1963 chevy. He does some of the best work i have seen. shows the steps in great detail. I would go and watch some of his videos. he is amazing.

Hey I'm 16. Nice to see another guy my age here. lol 4X4's rock! I've seen many of Gibson's videos. He has a sweet truck. He's apart of this club. Username "Boat." He pops up once in a blue moon. Hope your truck is going well.

62stepside longbox · 12-28-2015, 02:42 AM

Quote:

Originally Posted by sampsmit000

I am also 15. I am doing a 1964 k10. Go on youtube and check out "gibson63" He is doing a 1963 chevy. He does some of the best work i have seen. shows the steps in great detail. I would go and watch some of his videos. he is amazing.

Hey! Great to see more young guys on here. I would like to see what your doing to your truck. Do you have a build thread? What are your plans? I've seen some of gibson63's videos and he does great work.

12-18-2015, 11:55 AM	#101
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside I can see the light! This is a household light socket that the po put in. I put a 12 volt bulb in it and it works! Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-18-2015, 04:19 PM	#102
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: A 15 year old's project. Rusty 62 stepside That's so cool. Years ago I used to use a five watt bulb in household socket hooked to my CB radio. It would light up when you talk or modulate. Really neat way of testing the radio. __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

12-20-2015, 02:56 AM	#104
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside First day of Christmas break, so I got busy. Built a 1bbl to 2bbl adaptor plate out of aluminum. Ported and polished the inside so it should flow pretty good. Then I got started on the linkage, the pic below is the pedal assembly after I flipped the arm so when I give it gas it pulls instead of pushing. Then I built a rod with bends that goes from the pedal arm to the carb. Here's a video: http://youtu.be/PU0i3WgsB0Y Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-20-2015, 09:33 AM	#105
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 47,086	Re: A 15 year old's project. Rusty 62 stepside Nice work on the linkage. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-20-2015, 04:21 PM	#106
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Looks good. That a carb off a gmc v6? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-21-2015, 07:21 PM	#108
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Made a cross member to put between the frame rails for the gas tank straps to bolt to. I will weld it in place later today. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-21-2015, 07:22 PM	#109
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside 02 Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-21-2015, 08:52 PM	#110
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Made some gas tank straps Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-21-2015, 09:17 PM	#111
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Cool, has the carter seemed to make a difference? __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-22-2015, 02:38 AM	#112
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Not a huge difference but defiantly helps __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-22-2015, 02:55 AM	#113
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Ok no pics right now but I finished all of the gas tank straps and mounts and bolted the tank in. Now it's time to pull it back off and get the bumper mounted so I know where to cut the hole for the gas filler. __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-23-2015, 02:04 AM	#114
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Started working on mounting the bumper. Built one of two brackets that will be welded to the bumper and bolt to a piece of angle iron that will go inside the frame rails. I made the holes oblong so that the height of the bumper can be adjusted. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-23-2015, 06:44 PM	#115
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Number 2 is finished. The old set of files is sure getting a good workout Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-23-2015, 09:34 PM	#116
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside I found this inside my radio Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-23-2015, 09:38 PM	#117
65sub Registered User Join Date: Jun 2014 Location: dresden , ontario Posts: 628	Re: A 15 year old's project. Rusty 62 stepside Nice work on the bumper brackets. Did you really make the slots with a file? __________________ Dale ---------------- My suburban's Twisted Little Sister http://67-72chevytrucks.com/vboard/s...d.php?t=655167



Register or Log In To remove these advertisements.

12-23-2015, 10:01 PM	#118
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside X2, Nice work. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-23-2015, 10:43 PM	#119
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Thanks guys. Yes I made them with a drill press, a hacksaw but mostly files. Took a while. Times like these when a cnc plasma cutter would come in handy __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-26-2015, 01:47 AM	#120
62stepside longbox Registered User Join Date: Aug 2015 Location: Kelowna, B.C, Canada Posts: 1,747	Re: A 15 year old's project. Rusty 62 stepside Installed my Christmas present! Sun pro super tach 2. I'm impressed with the quality, compatibility and look. Attached Images __________________ Nik...................____ 62 lwb c10 step-side 261 5 spd .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ my build thread. Sending unit solution

12-26-2015, 01:25 PM	#121
TJ's Chevy Registered User Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: A 15 year old's project. Rusty 62 stepside Nice! __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

12-26-2015, 09:30 PM	#122
rusty76 Registered User Join Date: Sep 2012 Location: Midway, NC Posts: 3,275	Re: A 15 year old's project. Rusty 62 stepside Cool __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=581873 The low buck build threads. Check'em out! http://67-72chevytrucks.com/vboard/s...d.php?t=666022 My build thread Crossmembers CC

12-27-2015, 11:32 PM	#123
sampsmit000 Registered User Join Date: Dec 2015 Location: Lehi,Utah Posts: 213	Re: A 15 year old's project. Rusty 62 stepside I am also 15. I am doing a 1964 k10. Go on youtube and check out "gibson63" He is doing a 1963 chevy. He does some of the best work i have seen. shows the steps in great detail. I would go and watch some of his videos. he is amazing.

Register or Log In To remove these advertisements.